****************************************************************************************************
** LNG product:		ELISA source
****************************************************************************************************
** Type:               Sequence 
**  
** FOP Name & Version: None
**
** Description:		This sequence execute the Full Functional Test (SFT) of the Solar Orbiter
**					SWA instrument as described in the SWA test procedure referenced below.
**
** Input Arguments:	None
**
** Output Values:		None
**
** CSW Version:		V2.1.3 or higher
** 
** FOPs used:			None 
**
** HK TM packets used:	AB.TM.YIA58200, AB.TM.YIA58201, AB.TM.YIA58202, AB.TM.YIA58203,
**					AB.TM.YIA58211, AB.TM.YIA58212, AB.TM.YIA58213, AB.TM.YIA58216, AB.TM.YIA58907
**
** Test Procedure & Reference:	SWA FM Full Functional Test Procedure
**							SO-SWA-MSSL-TP-058 Issue 2A
**
** Restrictions and Limitations: SSMM hardware required to be ON before SFT/FFT starts.     
**
****************************************************************************************************
**	History
**--------------------------------------------------------------------------------------------------
**	Version	Date			Author		Comment
**--------------------------------------------------------------------------------------------------
**	1.0		10/05/2016	J.Silverthorn	Initial creation 
**	1.1		15/12/2016	J.Clarke		
**	1.2		19/12/2016	J.Clarke		Updated parameter checks after 7.1.4 
**	1.3		19/12/2016	J.Clarke		sUnit_side proto changed to UNIT
**	1.4		19/12/2016	J.Clarke		Step 9.1.5 switch to before step 9.1.2 to sync unit before sending commands. Commented out YIA58907 as not belived to be routed to ground see OBS 1 	
**	1.5		19/12/2016	J.Clarke		Increased wait before Time Sync command to 12 secs 
**	1.6		21/12/2016	J.Clarke		Step 9.4.16 chencged packet to "AB.TM.YIA58165"	instead of YIA58164
**	1.7		21/02/2017	J.Clarke		Made changes to align this script to SWA updated test procedure SO-SWA-MSSL-TP-033 Iss 2 delivered 10/02/17
**	1.8		21/02/2017	J.Clarke		Updated typos in step descriptions. 9.7.13 and 9.9.8. updated all comments from SWA 
**	1.9		27/02/2017	J.Clarke		fixed error is script 9.2.1 . Updated section 9.2 flow. 
**	1.10		28/02/2017	J.Clarke		Increased wait times for 1,7 for EAS1 and EAS2 macros. 
**	1.11		28/02/2017	J.CLarke		Changed temp limits in HIS functional test
**	1.12		28/02/2017	J.Clarke		Fixed typo in IIC test case.  
**	1.13		28/02/2017	J.Clarke		Fixed typo in set 9.13.7
**	1.14		28/02/2017	J.CLarke		Fixed typo in step 9.13.7
**	1.15		28/02/2017	J.Clarke		added wait in step 9.13.7
**	1.16		28/02/2017	J.Clarke		Increased wait time in between switching off EAS1 and Checking the TM in section 9.14 
**	1.17		01/03/2017	J.Clarke		Increased wait time after triggering on RPW in IIC test case 
**	1.18		01/03/2017	J.Clarke		Switched from annac to IPVAC to capture NIAG1206 step 9.11 added halt after test case 9.2 
**	1.19		07/08/2019	J.Silverthorn	Made changes to align this script to SWA updated test procedure SO-SWA-MSSL-TP-058 Iss 2A delivered 03/06/19
**	1.20		22/08/2019				Made changes to align this script to SWA updated test procedure SO-SWA-MSSL-TP-058 Iss 2C
** 	1.21								FDIR temporaily disabled for EM debugging
** 	1.22								Typo fixed for HIS HV "DISABLED"
**	1.23								Debug run on ETB - all changes documented within script
**	1.24								Debug run on ETB - all changes documented within script
**	1.25								Debug run on ETB - all changes documented within script
**	1.26		11/09/2019				Changes made during formal FFT under ACS 498. See comments in script for details.
**	1.27								Changes made during formal FFT under ACS 498. See comments in script for details.
***************************************************************************************************
** SEQUENCE TIET_SWA_FFT

SEQUENCE TIET_SWA_FFT
** Definition of Input parameters
	proto
		string	$UNIT		:= "A"     	  upper ["A","B"]
		string	$sPAS_HVSafety		["AIRSAFE","DISABLED","FLIGHT"]  
		string	$sHIS_HVSafety		["AIRSAFE","DISABLED","FLIGHT"]  

	end proto
** Definition of Constants
	const
		string 	$s_Trace 		:= "TRACE"
		string   	$sTitle  		:= "TITLE"  
		string	$sTrace 		:= "TRACE"
** Definition of Variables
	var
		string	$sBufArg := ""
		string	$sNumPha
		string	$sPlatform	
		date		$dCurDate
	
		int 		$Count
		int		$i_reportflowID
		int		$i_reportflowID_1
		int		$i_reportflowID_2
		int		$i_reportflowID_3
		int		$i_reportflowID_4
		int		$i_reportflowID_5
		int		$i_reportflowID_6
		int		$i_reportflowID_7
		int		$i_reportflowID_8
		int		$i_reportflowID_9
		int		$i_reportflowID_10
		int		$i_reportflowID_11
		int		$i_reportflowID_12
		int		$i_reportflowID_13
		int		$i_reportflowID_14
		int		$i_reportflowID_15
		int		$i_reportflowID_16

		int      	$i_RptRefNb
		int      	$i_RptRefNb_1
		int      	$i_RptRefNb_2
		int      	$i_RptRefNb_3
		int      	$i_RptRefNb_4
		int      	$i_RptRefNb_5
		int      	$i_RptRefNb_6
		int      	$i_RptRefNb_7

		int 		$iDWRDCounter
		string 	$s_FileString
		int 		$iParsedDump(2)
		int 		$iToBePatched(2)

		int 		$i_SBM1_FLAG
		int 		$i_Thrust_Firing_FLAG	
		int		$iMAG_Bytes(2)
		string	$sChoice	
	
	************************************************************************************************
	** Main body of the sequence 
	************************************************************************************************
	main
		
		**-----------------------------------------------------------------------------------------
		** Opens the execution window.
		**-----------------------------------------------------------------------------------------
		window
		
		$sBufArg := ARG($sBufArg,  $UNIT, "Choice of Unit Side")
		
		@su_seqstart($sBufArg, *$dCurDate, "TRACE")
		*********************************************************************************************
		** Get the call tree for the sequence 
		*********************************************************************************************
		call TSZA_CALLTREE, SEQ_NAME := "TIET_SWA_FFT"

		$sPlatform := AB.USR.PLATFORM
		
		IF ($sPAS_HVSafety = "FLIGHT")
			raise NOK, "There is no HV safety plug connected to PAS - switch on not allowed"
			abort
		ENDIF

		IF ($sHIS_HVSafety = "FLIGHT")
			raise NOK, "There is no HV safety plug connected to HIS - switch on not allowed"
			abort
		ENDIF
		
		@su_seqphase2(1, "Starting SWA FFT on side "+$UNIT, *$sNumPha,"",  $sTitle)
		
		@su_seqphase2(2, "Prerequisite: Switch On SWA side "+$UNIT, *$sNumPha,"",  $sTitle)
		
		CALL TISC_SWA_ON , SUNIT := $UNIT, STARGETMODE := "DPUOPS" , SMONITOR := "NONE"
		
		if ($sHIS_HVSafety = "DISABLED")
			call TISS_HIS_ON, $UNIT, "HV_PLUG_DISABLE", "HV_RAMP_NONE"
		else
			call TISS_HIS_ON, $UNIT, "HV_PLUG_AIRSAFE", "HV_RAMP_UP"
		endif

		call TISS_PAS_ON, $sPAS_HVSafety
		call TISS_EAS_ON, "1"
		call TISS_EAS_ON, "2"
 
		***************************************************************************************************
		@SU_SEQPHASE2(1, "7	DPU Test", *$sNumPha, "",  $sTitle)
		***************************************************************************************************
		
		@SU_SEQPHASE2(2, "7.1.1 - Switch DPU TC count HK on ", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58050, PIA58050_ := "DPU_TC_CNT_HK"}, $s_Trace, "", "ACK_EXEC", 60)

		@RPZA_HKTM_CATCH("AB.TM.YIA58204", "WAIT" , *$Count , 60)								
		
		@SU_SEQPHASE2(2, "7.1.2 - Switch DPU TC count HK off", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58051, PIA58050_ := "DPU_TC_CNT_HK"}, $s_Trace, "", "ACK_EXEC", 60)	

		@SU_SEQPHASE2(2, "7.1.3 - Switch DPU validity parameters HK on ", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58050, PIA58050_ := "DPU_VALID_PAR_HK"}, $s_Trace, "", "ACK_EXEC", 60)	

		@RPZA_HKTM_CATCH("AB.TM.YIA58205", "WAIT" , *$Count , 60)					
	
		@SU_SEQPHASE2(2, "7.1.4 - Switch DPU validity parameters HK off ", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58051, PIA58050_ := "DPU_VALID_PAR_HK"}, $s_Trace, "", "ACK_EXEC", 60)	
				
		@SU_SEQPHASE2(2, "7.1.5 - Switch DPU diagnostic parameters HK on", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58050, PIA58050_ := "DPU_HW_DIAG_HK"}, $s_Trace, "", "ACK_EXEC", 60)	

		@RPZA_HKTM_CATCH("AB.TM.YIA58206", "WAIT" , *$Count , 60)					
					
		@SU_SEQPHASE2(2, "7.1.6 - Switch DPU diagnostic parameters HK off", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58051, PIA58050_ := "DPU_HW_DIAG_HK"}, $s_Trace, "", "ACK_EXEC", 60)	
				
		@SU_SEQPHASE2(2, "7.1.7 - Switch DPU maximum duration HK on", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58050, PIA58050_ := "DPU_MAX_DUR_HK"}, $s_Trace, "", "ACK_EXEC", 60)	

		@RPZA_HKTM_CATCH("AB.TM.YIA58207", "WAIT" , *$Count , 60)					
					
		@SU_SEQPHASE2(2, "7.1.8 - Switch DPU maximum manager duration HK off", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58051, PIA58050_ := "DPU_MAX_DUR_HK"}, $s_Trace, "", "ACK_EXEC", 60)	
						
		@SU_SEQPHASE2(2, "7.1.9 - Switch DPU FDIR parameters HK on ", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58050, PIA58050_ := "DPU_FDIR_ST_HK"}, $s_Trace, "", "ACK_EXEC", 60)	

		@RPZA_HKTM_CATCH("AB.TM.YIA58208", "WAIT" , *$Count , 60)					
					
		@SU_SEQPHASE2(2, "7.1.10 - Switch DPU FDIR parameters HK off", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58051, PIA58050_ := "DPU_FDIR_ST_HK"}, $s_Trace, "", "ACK_EXEC", 60)	
							
		@SU_SEQPHASE2(2, "7.1.11 - Switch DPU derived HK on", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58050, PIA58050_ := "DPU_FDIR_MON_HK"}, $s_Trace, "", "ACK_EXEC", 60)	

		@RPZA_HKTM_CATCH("AB.TM.YIA58209", "WAIT" , *$Count , 60)

		@SU_SEQPHASE2(2, "7.1.12 - Switch DPU derived HK off", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58051, PIA58050_ := "DPU_FDIR_MON_HK"}, $s_Trace, "", "ACK_EXEC", 60)	
											
		@SU_SEQPHASE2(2, "7.1.13 - Switch DPU derived HK on", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58050, PIA58050_ := "DPU_MON_DER_HK"}, $s_Trace, "", "ACK_EXEC", 60)	

		@RPZA_HKTM_CATCH("AB.TM.YIA58210", "WAIT" , *$Count , 60)					
		
		@SU_SEQPHASE2(2, "7.1.14 - Switch DPU derived HK off", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58051, PIA58050_ := "DPU_MON_DER_HK"}, $s_Trace, "", "ACK_EXEC", 60)	
							
		@SU_SEQPHASE2(2, "7.1.15 - Switch DPU TM counters HK on ", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58050, PIA58050_ := "DPU_TM_CNT"}, $s_Trace, "", "ACK_EXEC", 60)	

		@RPZA_HKTM_CATCH("AB.TM.YIA58214", "WAIT" , *$Count , 60)					

		@SU_SEQPHASE2(2, "7.1.16 - Switch DPU TM Counters HK off ", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58051, PIA58050_ := "DPU_TM_CNT"}, $s_Trace, "", "ACK_EXEC", 60)	

		@SU_SEQPHASE2(2, "7.1.17 - Switch DPU error counters HK on", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58050, PIA58050_ := "DPU_ERR_CNT"}, $s_Trace, "", "ACK_EXEC", 60)	

		@RPZA_HKTM_CATCH("AB.TM.YIA58215", "WAIT" , *$Count , 60)					

		@SU_SEQPHASE2(2, "7.1.18 - Switch DPU error counters HK off", *$sNumPha, "",  $sTitle)	
		@su_send({ AB.TC.ZIA58051, PIA58050_ := "DPU_ERR_CNT"}, $s_Trace, "", "ACK_EXEC", 60)	
					
		*******************************************************************
		@SU_SEQPHASE2(1, "DPU Memory Test", *$sNumPha, "",  $sTitle)
		*******************************************************************

		@SU_SEQPHASE2(2, "7.1.19 - Dump RAM", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58164")
		@SU_SEND({ AB.TC.ZIA58054 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_RAM" , \
			PIA60330_ := 0x40000000 , \
			PIA60329_ := 10 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58164", *$i_RptRefNb)  -- TM	YIA58164 ; TM(6,6) SID=0 SWA_TM_MEM_DUMP_RAM
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58164.NIA01547","=","DPU_RAM")		
		stopreportflow $i_reportflowID
						
		@SU_SEQPHASE2(2, "7.1.20 - Dump MRAM", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58173")
		@SU_SEND({ AB.TC.ZIA58054 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_MRAM1" , \
			PIA60330_ := 0x10000000 , \
			PIA60329_ := 10 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58173", *$i_RptRefNb)  -- TM	YIA58173 ; TM(6,6) SID=1 SWA_TM_MEM_DUMP_MRAM1
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58173.NIA01547","=","DPU_MRAM1")		
		stopreportflow $i_reportflowID
	
		@SU_SEQPHASE2(2, "7.1.21 - Dump PROM", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58174")
		@SU_SEND({ AB.TC.ZIA58054 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_PROM" , \
			PIA60330_ := 0x00000000 , \
			PIA60329_ := 10 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58174", *$i_RptRefNb)  -- TM	YIA58174 ; TM(6,6) SID=2 SWA_TM_MEM_DUMP_PROM
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58174.NIA01547","=","DPU_PROM")		
		stopreportflow $i_reportflowID
			
		@SU_SEQPHASE2(2, "7.1.22 - Dump MRAM2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58179")
		@SU_SEND({ AB.TC.ZIA58054 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_MRAM2" , \
			PIA60330_ := 0x10000000 , \
			PIA60329_ := 10 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58179", *$i_RptRefNb)  -- TM	YIA58179 ; TM(6,6) SID=3 SWA_TM_MEM_DUMP_MRAM2
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58179.NIA01547","=","DPU_MRAM2")		
		stopreportflow $i_reportflowID
	
		@SU_SEQPHASE2(2, "7.1.23 - Write to RAM", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58053 , \
					SHF:OBV := 0 , \
					SID:OBV := 120 , \
					PIA58056_ := "DPU_RAM" , \
					PIA60330_ := 0x40700000 , \
					PIA60329_:OBV := 4 , \
					PIA60432_1:OBV := 0xAB , \
					PIA60432_2:OBV := 0xCD , \
					PIA60432_3:OBV := 0xEF , \
					PIA60432_4:OBV := 0x01}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(2, "7.1.24 - Check RAM", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58165")
		@SU_SEND({ AB.TC.ZIA58055 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_RAM" , \
			PIA60330_ := 0x40700000 , \ 
			PIA60329_ := 4 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58165", *$i_RptRefNb)  -- TM	YIA58165 ; TM(6,10) SID=0 SWA_TM_MEM_CHK_RAM
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58165.NIA01547","=","DPU_RAM")	
		@SU_RAWRC($i_RptRefNb, "AB.TM.YIA58165.NIA01550", "=" , 1186)	
		
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(2, "7.1.25 - Check MRAM1", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58165")
		@SU_SEND({ AB.TC.ZIA58055 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_MRAM1" , \
			PIA60330_ := 0x101E1000 , \
			PIA60329_ := 52 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58165", *$i_RptRefNb)  -- TM	YIA58165 ; TM(6,10) SID=0 SWA_TM_MEM_CHK_RAM
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58165.NIA01547","=","DPU_MRAM1")
		@SU_RAWRC($i_RptRefNb, "AB.TM.YIA58165.NIA01550", "NO" , 16815)	-- Dependant on SW version	-- v1.23	
		
		stopreportflow $i_reportflowID
	
		@SU_SEQPHASE2(2, "7.1.26 - Check PROM", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58165")
		@SU_SEND({ AB.TC.ZIA58055 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_PROM" , \
			PIA60330_ := 0x00000000 , \
			PIA60329_ := 100 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58165", *$i_RptRefNb)  -- TM	YIA58165 ; TM(6,10) SID=0 SWA_TM_MEM_CHK_RAM
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58165.NIA01547","=","DPU_PROM")
		@SU_RAWRC($i_RptRefNb, "AB.TM.YIA58165.NIA01550", "=" , 22271)		
		
		stopreportflow $i_reportflowID
	
		@SU_SEQPHASE2(2, "7.1.27 - Check MRAM2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58165")
		@SU_SEND({ AB.TC.ZIA58055 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_MRAM2" , \
			PIA60330_ := 0x101E1000 , \
			PIA60329_ := 52 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58165", *$i_RptRefNb)  -- TM	YIA58165 ; TM(6,10) SID=0 SWA_TM_MEM_CHK_RAM
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58165.NIA01547","=","DPU_MRAM2")
		@SU_RAWRC($i_RptRefNb, "AB.TM.YIA58165.NIA01550", "NO" , 16815)	-- Dependant on SW version	-- v1.23	
		
		stopreportflow $i_reportflowID
	
		@su_wait(5)

		ta_print "NOTE : next 3 commands are expected to fail."
		
		@SU_SEQPHASE2(2, "7.1.28 - Check not valid address", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58055 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_RAM" , \
			PIA60330_ := 0x00000000 , \
			PIA60329_ := 16000 }, $s_Trace, VER := "NEXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(2, "7.1.29 - Check not valid length", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58055 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "DPU_RAM" , \
			PIA60330_ := 0x40000000 , \
			PIA60329_ := 0x800000 }, $s_Trace, VER := "NEXEC", TIMEOUT_VER := 60)
	
		@SU_SEQPHASE2(2, "7.1.30 - Check dump abort while not dumping", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58056 , \
			SHF:OBV := 0 , \
			SID:OBV := 120}, $s_Trace, VER := "NEXEC", TIMEOUT_VER := 60)

		**********************************************************************************				
		@SU_SEQPHASE2(2, "8 - HIS Low Voltage Tests ", *$sNumPha, "",  $sTitle)
		**********************************************************************************	
			
		@SU_SEQPHASE2(2, "8.1 - HIS Test Case 1: Power Up BOOT test", *$sNumPha, "",  $sTitle)	
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58601")
		
		@SU_SEQPHASE2(3, "8.1.1 - *WAIT*, 0:02:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(120)

		@SU_SEQPHASE2(3, "8.1.2 - Reset HIS", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58916 , \
						PIA59010_ := "HIS"}, $s_Trace, VER := "SKIP", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58601", *$i_RptRefNb_1) 
		stopreportflow $i_reportflowID_1

--		@RPZA_HKTM_CATCH("AB.TM.YIA58213", "WAIT" , *$Count , 60) -- v1.23
		
 		@su_ipvacs("AB.TM.NIA03004","=0","=0", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03006","=0","=0", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03007","=0","=0", $s_Trace, 10)
	
		@SU_SEQPHASE2(3, "8.1.3 - *WAIT*, 0:00:22, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(22)

		@SU_SEQPHASE2(3, "8.1.4 - Enable command echoing", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58927 , \
						PIA59000_ := "ENABLE", \
						PIA60359_ := 43827 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
				
		@SU_SEQPHASE2(3, "8.1.5 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(1)
		
		@SU_SEQPHASE2(3, "8.1.6 - Command HK at every 30 s", *$sNumPha, "",  $sTitle) -- v1.22
		@SU_SEND({ AB.TC.ZIA58931 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59056_ := "BOOT_TREP" , \
			PIA60361_ := 30}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)	-- v1.20

		@RPZA_HKTM_CATCH("AB.TM.YIA58213", "WAIT" , *$Count , 60)
		
 		@su_ipvacs("AB.TM.NIA03004","=2","=2", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03006","=204","=204", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03007","=176","=176", $s_Trace, 10)
 					
		@SU_SEQPHASE2(3, "8.1.7 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.1.8 - Verify NOP ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58915 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "8.1.9 - Verify HIS is in Maintenance mode ", *$sNumPha, "",  $sTitle)

		@RPZA_HKTM_CATCH("AB.TM.YIA58213", "WAIT" , *$Count , 60)
		
 		@su_ipvacs("AB.TM.NIA03004","=3","=3", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03006","=204","=204", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03007","=143","=143", $s_Trace, 10)
		
		@SU_SEQPHASE2(3, "8.1.10 - Verify time messages are arriving", *$sNumPha, "",  $sTitle)
		
 		@su_ipvacs("AB.TM.NIA03000",">0","NO", $s_Trace, 10) -- v1.20

		@SU_SEQPHASE2(3, "8.1.11 - Verify time codes are arriving", *$sNumPha, "",  $sTitle)
		
 		@su_ipvacs("AB.TM.NIA03001",">0","NO", $s_Trace, 10) -- v1.20

		@SU_SEQPHASE2(3, "8.1.12 - Verify sequence count is incrementing", *$sNumPha, "",  $sTitle)
		
 		@su_ipvacs("AB.TM.NIA03001",">0","NO", $s_Trace, 10) -- v1.20

		@SU_SEQPHASE2(3, "8.1.13 - Verify FSW/Table image test status ", *$sNumPha, "",  $sTitle)
		
		@su_rawacs("AB.TM.NIA03501","=",0xC0DEC0DE, 0xFFFFFFFF, $sTrace, 5) --  BOOT.eeprom_1_code_magic_num
		@su_rawacs("AB.TM.NIA03502","=",0xDEEC9F01, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM1_REP_CKS -- v1.20
		@su_rawacs("AB.TM.NIA03503","=",0x00009F15, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM1_LEN -- v1.20
		@su_rawacs("AB.TM.NIA03504","=",0x44180207, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM1_VER -- v1.20
		@su_rawacs("AB.TM.NIA03505","=",0x40080000, 0xFFFFFFFF, $sTrace, 5) --  BOOT.eeprom_1_code_addr
		@su_rawacs("AB.TM.NIA03506","=",0xC0DEC0DE, 0xFFFFFFFF, $sTrace, 5) --  BOOT.eeprom_2_code_magic_num
		@su_rawacs("AB.TM.NIA03507","=",0xDEEC9F01, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM2_REP_CKS -- v1.20
		@su_rawacs("AB.TM.NIA03508","=",0x00009F15, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM2_LEN -- v1.20
		@su_rawacs("AB.TM.NIA03509","=",0x44180207, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM2_VER -- v1.20
		@su_rawacs("AB.TM.NIA03510","=",0x40080000, 0xFFFFFFFF, $sTrace, 5) --  BOOT.eeprom_2_code_addr
		@su_rawacs("AB.TM.NIA03511","=",0xDEEC9F01, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM1_CAL_CKS
		@su_rawacs("AB.TM.NIA03512","=",0xDEEC9F01, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM2_CAL_CKS -- v1.20
		@su_rawacs("AB.TM.NIA03513","=",0x007AB1E5, 0xFFFFFFFF, $sTrace, 5) --  BOOT.eeprom_1_table_magic_num
		@su_rawacs("AB.TM.NIA03514","=",0x138DB66D, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM1_TABLE_REP_CKS -- v1.20
		@su_rawacs("AB.TM.NIA03515","=",0x00017F86, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM1_TABLE_LEN
		@su_rawacs("AB.TM.NIA03516","=",0x01170506, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM1_TABLE_VER
		@su_rawacs("AB.TM.NIA03517","=",0x007AB1E5, 0xFFFFFFFF, $sTrace, 5) --  BOOT.eeprom_2_table_magic_num
		@su_rawacs("AB.TM.NIA03518","=",0x138DB66D, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM2_TABLE_REP_CKS -- v1.20
		@su_rawacs("AB.TM.NIA03519","=",0x00017F86, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM2_TABLE_LEN
		@su_rawacs("AB.TM.NIA03520","=",0x07190131, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM2_TABLE_VER -- v1.20
		@su_rawacs("AB.TM.NIA03521","=",0x138DB66D, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM1_TABLE_CAL_CKS -- v1.20
		@su_rawacs("AB.TM.NIA03522","=",0x138DB66D, 0xFFFFFFFF, $sTrace, 5) --  BOOT.HIS_EEPROM2_TABLE_CAL_CKS -- v1.20

		@SU_SEQPHASE2(3, "8.1.14 - Verify digital status", *$sNumPha, "",  $sTitle)
		
		@SU_RAWacs("AB.TM.NIA03546","=",0x83, 0xFF, $sTrace, 5)              --  BOOT.spw_link_version
		@SU_RAWacs("AB.TM.NIA03545","=",0xFFFF, 0xFFFF, $sTrace, 5)          --  BOOT.adc_wait_states
		@SU_RAWacs("AB.TM.NIA03541","=",0x360802FF, 0xFFFFFFFF, $sTrace, 5)  --  BOOT.sparc_mem_cfg_reg_1
		@SU_RAWacs("AB.TM.NIA03543","=",0xC8000300, 0xFFFFFFFF, $sTrace, 5)  --  BOOT.sparc_mem_cfg_reg_3
		@SU_IPVacs("AB.TM.NIA04700","=19","=19", $sTrace, 5)                 --  BOOT.cdh_fpga_rev
		@SU_IPVacs("AB.TM.NIA04400",">=1","NO", $sTrace, 5)                  --  BOOT.pkt_creation_time_whole
		
		@SU_SEQPHASE2(3, "8.1.15 - Wait for memory test to complete", *$sNumPha, "",  $sTitle)
		@SU_IPVacs("AB.TM.NIA03010",">90","NO", $sTrace, 240)    -- HK.his_proc_idle

		@SU_SEQPHASE2(3, "8.1.16 - Verify memory test status", *$sNumPha, "",  $sTitle)
		@SU_IPVacs("AB.TM.NIA03525","=0","=0", $sTrace, 5) 					--  BOOT.HIS_SCI_MEM_TEST_FST
		@SU_IPVacs("AB.TM.NIA03526","=0","=0", $sTrace, 5) 					--  BOOT.HIS_SCI_MEM_TEST_LST
		@SU_IPVacs("AB.TM.NIA03527","=0","=0", $sTrace, 5)					--  BOOT.HIS_SCI_MEM_PAT_FAI_CNT
		@SU_IPVacs("AB.TM.NIA03528","=0","=0", $sTrace, 5)					--  BOOT.HIS_SCI_MEM_PAT_BAD_BLKS
		@SU_IPVacs("AB.TM.NIA03529","=0","=0", $sTrace, 5) 					--  BOOT.HIS_SCI_MEM_INV_TEST_FST
		@SU_IPVacs("AB.TM.NIA03530","=0","=0", $sTrace, 5) 					--  BOOT.HIS_SCI_MEM_INV_TEST_LST
		@SU_IPVacs("AB.TM.NIA03531","=0","=0", $sTrace, 5) 					--  BOOT.HIS_SCI_MEM_INV_FAI_CNT
		@SU_IPVacs("AB.TM.NIA03532","=0","=0", $sTrace, 5) 					--  BOOT.HIS_SCI_MEM_INV_BAD_BLKS
		@SU_IPVacs("AB.TM.NIA03533","=0","=0", $sTrace, 5) 					--  BOOT.HIS_CDH_PAT_FST_FAI_ADD
		@SU_IPVacs("AB.TM.NIA03534","=0","=0", $sTrace, 5) 					--  BOOT.HIS_CDH_PAT_LST_FAI_ADD
		@SU_IPVacs("AB.TM.NIA03535","=0","=0", $sTrace, 5) 					--  BOOT.HIS_CDH_PAT_FAI_CNT
		@SU_IPVacs("AB.TM.NIA03536","=0","=0", $sTrace, 5) 					--  BOOT.HIS_CDH_PAT_BAD_BLKS
		@SU_IPVacs("AB.TM.NIA03537","=0","=0", $sTrace, 5) 					--  BOOT.HIS_CDH_INV_FST_FAI_ADD
		@SU_IPVacs("AB.TM.NIA03538","=0","=0", $sTrace, 5) 					--  BOOT.HIS_CDH_INV_LST_FAI_ADD
		@SU_IPVacs("AB.TM.NIA03539","=0","=0", $sTrace, 5) 					--  BOOT.HIS_CDH_INV_FAI_CNT
		@SU_IPVacs("AB.TM.NIA03540","=0","=0", $sTrace, 5) 					--  BOOT.HIS_CDH_INV_BAD_BLKS
		@SU_RAWacs("AB.TM.NIA03523","=",0x4A55, 0xFFFFFFFF, $sTrace, 5) 	--  BOOT.boot_mem_addr
		@SU_RAWacs("AB.TM.NIA03524","=",0x4A55, 0xFFFFFFFF, $sTrace, 5) 	--  BOOT.boot_mem_data

		@SU_SEQPHASE2(3, "8.1.17 - Verify analog telemetry being received from CDH", *$sNumPha, "",  $sTitle)

--		@su_anaacs("AB.TM.NIA01392",">=-40","<=80", $sTrace, 10)            -- HK.his_lvps_ac_link_t_ave
--		@su_anaacs("AB.TM.NIA01393",">=-40","<=80", $sTrace, 10)            -- HK.HIS_LVPS_12V_DCDC_TMP_AVE
--		@su_anaacs("AB.TM.NIA01394",">=-40","<=80", $sTrace, 10)            -- HK.HIS_LVPS_P3_3V_DCDC_TMP_AVE
--		@su_anaacs("AB.TM.NIA01395",">=-40","<=80", $sTrace, 10)            -- HK.his_lvps_5V_dcdc_tmp_ave
--		@su_anaacs("AB.TM.NIA01396",">=-40","<=80", $sTrace, 10)            -- HK.HIS_PS_HVPS_TMP_AVE
--		@su_anaacs("AB.TM.NIA01397",">=-40","<=80", $sTrace, 10)            -- HK.HIS_CDH_BOARD_TMP_AVE
--		@su_anaacs("AB.TM.NIA01398",">=-40","<=80", $sTrace, 10)            -- HK.HIS_CDH_CPU_TMP_AVE
--		@su_anaacs("AB.TM.NIA01399",">=-40","<=80", $sTrace, 10)            -- HK.HIS_HVPS_TMP_AVE

-- v1.26 OBS #1 temporary change due to ne cal curve in database

		@su_rawacs("AB.TM.NIA01392","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01393","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01394","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01395","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01396","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01397","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01398","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01399","NO",0x0, 0x0, $sTrace, 120) 

		@su_anaacs("AB.TM.NIA01400",">=-0-01","<=0.1683", $sTrace, 10)   	-- HK.his_lvps_ac_link_i_ave
		@su_anaacs("AB.TM.NIA01401",">=0","<=24.3716", $sTrace, 10)         -- HK.his_lvps_ac_link_v_ave
		@su_anaacs("AB.TM.NIA01402",">=-13.2","<=-12.3481", $sTrace, 10)    -- HK.HIS_LVPS_N12V_AVE
		@su_anaacs("AB.TM.NIA01403",">=1.72078","<=1.82825", $sTrace, 10)   -- HK.his_cdh_p1_8v_v_ave
		@su_anaacs("AB.TM.NIA01404",">=1.4453","<=1.53676", $sTrace, 10)    -- HK.his_cdh_p1_5v_v_ave
		@su_anaacs("AB.TM.NIA01405",">=12.04837","<=12.80496", $sTrace, 10) -- HK.HIS_LVPS_P12V_AVE
		@su_anaacs("AB.TM.NIA01406",">=0.239","<=0.448", $sTrace, 10)       -- HK.HIS_LVPS_P3_3V_CUR_AVE
		@su_anaacs("AB.TM.NIA01407",">=-0.618","<=0", $sTrace, 10)          -- HK.HIS_HVPS_MAIN_NEG_AVE
		@su_anaacs("AB.TM.NIA01408",">=-0.618","<=0.618", $sTrace, 10)      -- HK.HIS_HVPS_TOP_DEF_AVE
		@su_anaacs("AB.TM.NIA01409",">=-0.618","<=0.618", $sTrace, 10)      -- HK.HIS_HVPS_BOT_DEF_AVE
		@su_anaacs("AB.TM.NIA01340",">=-49.9","<=80", $sTrace, 10)          	-- HK.his_eais_port_tmp_t_ave -- v1.20
		@su_anaacs("AB.TM.NIA01343",">=0","<=0.618", $sTrace, 10)           -- HK.HIS_HVPS_MAIN_POS_AVE
		@su_anaacs("AB.TM.NIA01346",">=-0.618","<=0", $sTrace, 10)          -- HK.HIS_HVPS_ANL_AVE
		@su_anaacs("AB.TM.NIA01349",">=-0.618","<=0.618", $sTrace, 10)      -- HK.HIS_HVPS_TOP_PLATE_AVE
		@su_anaacs("AB.TM.NIA01352",">=-2.64","<=0", $sTrace, 10)           -- HK.HIS_PA_HVPS_VOLT_M_AVE
		@su_anaacs("AB.TM.NIA01702",">=4.93317","<=5.08674", $sTrace, 10)   -- HK.his_cdh_p5v_dac_v_ave
		@su_anaacs("AB.TM.NIA01705",">=3.28086","<=3.346853", $sTrace, 10)  -- HK.his_cdh_p3_3v_adc_v_ave
		@su_ipvacs("AB.TM.NIA01708",">=9","<=25", $sTrace, 10)              -- HK.his_cdh_ground_v_ave
		@su_anaacs("AB.TM.NIA01711",">=0.013","<=0.11", $sTrace, 10)       -- HK.HIS_HVPS_P12V_CUR_AVE -- v1.26 simple typo
		@su_anaacs("AB.TM.NIA01714",">=-0.11","<=-0.013", $sTrace, 10)      -- HK.HIS_HVPS_N12V_CUR_AVE -- v1.26 simple typo
		@su_anaacs("AB.TM.NIA01723",">=-0.0121","<=-0.009", $sTrace, 10)    -- HK.HIS_LVPS_N5V_CUR_AVE
		@su_anaacs("AB.TM.NIA01726","NO","<=-0.0017", $sTrace, 10)     		-- HK.HIS_LVPS_N12V_CUR_AVE -- v1.26 simple typo
		@su_anaacs("AB.TM.NIA01729",">=3.20682","<=3.41548", $sTrace, 10)   -- HK.HIS_LVPS_P3_3V_AVE
		@su_anaacs("AB.TM.NIA01732",">=0.027","<=0.0429", $sTrace, 10)      -- HK.HIS_LVPS_P5V_CUR_AVE -- v1.20
		@su_anaacs("AB.TM.NIA01735",">=4.90432","<=5.21077", $sTrace, 10)   -- HK.HIS_LVPS_P5V_AVE
		@su_anaacs("AB.TM.NIA01738",">=-5.22954","<=-4.97319", $sTrace, 10) -- HK.HIS_LVPS_N5V_AVE
		@su_anaacs("AB.TM.NIA01741",">=0.015","NO", $sTrace, 10)       		-- HK.HIS_LVPS_P12V_CUR_AVE -- v1.20
		
--		@su_anaacs("AB.TM.NIA01320",">=-40","<=80", $sTrace, 10)            -- his_lvps_ac_link_t_min
--		@su_anaacs("AB.TM.NIA01321",">=-40","<=80", $sTrace, 10)            -- HIS_LVPS_12V_DCDC_TMP_MIN
--		@su_anaacs("AB.TM.NIA01322",">=-40","<=80", $sTrace, 10)            -- HIS_LVPS_P3_3V_DCDC_TMP_MIN
--		@su_anaacs("AB.TM.NIA01323",">=-40","<=80", $sTrace, 10)            -- his_lvps_5V_dcdc_tmp_min
--		@su_anaacs("AB.TM.NIA01324",">=-40","<=80", $sTrace, 10)            -- HIS_PS_HVPS_TMP_MIN
--		@su_anaacs("AB.TM.NIA01325",">=-40","<=80", $sTrace, 10)            -- HIS_CDH_BOARD_TMP_MIN
--		@su_anaacs("AB.TM.NIA01326",">=-40","<=80", $sTrace, 10)            -- HIS_CDH_CPU_TMP_MIN
--		@su_anaacs("AB.TM.NIA01327",">=-40","<=80", $sTrace, 10)            -- HIS_HVPS_TMP_MIN

-- v1.26 OBS #1 temporary change due to new cal curve in database

		@su_rawacs("AB.TM.NIA01320","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01321","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01322","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01323","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01324","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01325","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01326","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01327","NO",0x0, 0x0, $sTrace, 120) 

		@su_anaacs("AB.TM.NIA01328",">=-0.01","<=0.1683", $sTrace, 10)		-- his_lvps_ac_link_i_min
		@su_anaacs("AB.TM.NIA01329",">=-0","<=24.3716", $sTrace, 10)		-- his_lvps_ac_link_v_min
		@su_anaacs("AB.TM.NIA01330",">=-13.2","<=-12.3481", $sTrace, 10)	-- HIS_LVPS_N12V_MIN
		@su_anaacs("AB.TM.NIA01331",">=1.72078","<=1.82825", $sTrace, 10)	-- his_cdh_p1_8v_v_min
		@su_anaacs("AB.TM.NIA01332",">=1.4453","<=1.53676", $sTrace, 10)	-- his_cdh_p1_5v_v_min
		@su_anaacs("AB.TM.NIA01333",">=12.04837","<=12.80496", $sTrace, 10)	-- HIS_LVPS_P12V_MIN
		@su_anaacs("AB.TM.NIA01334",">=0.239","<=0.448", $sTrace, 10)	    -- HIS_LVPS_P3_3V_CUR_MIN
		@su_anaacs("AB.TM.NIA01335",">=-0.618","<=0", $sTrace, 10)			-- HIS_HVPS_MAIN_NEG_MIN
		@su_anaacs("AB.TM.NIA01336",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_TOP_DEF_MIN
		@su_anaacs("AB.TM.NIA01337",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_BOT_DEF_MIN
		@su_anaacs("AB.TM.NIA01338",">=-49.9","<=80", $sTrace, 10)			-- his_eais_port_tmp_t_min -- v1.20
		@su_anaacs("AB.TM.NIA01341",">=0","<=0.618", $sTrace, 10)			-- HIS_HVPS_MAIN_POS_MIN
		@su_anaacs("AB.TM.NIA01344",">=-0.618","<=0", $sTrace, 10)			-- HIS_HVPS_ANL_MIN
		@su_anaacs("AB.TM.NIA01347",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_TOP_PLATE_MIN
		@su_anaacs("AB.TM.NIA01350",">=-2.64","<=0", $sTrace, 10)			-- HIS_PA_HVPS_VOLT_M_MIN
		@su_anaacs("AB.TM.NIA01700",">=4.93317","<=5.08674", $sTrace, 10)	-- his_cdh_p5v_dac_v_min
		@su_anaacs("AB.TM.NIA01703",">=3.28086","<=3.346853", $sTrace, 10)	-- his_cdh_p3_3v_adc_v_min
		@su_anaacs("AB.TM.NIA01706",">=9.0","<=25.0", $sTrace, 10)			-- his_cdh_ground_v_min -- v1.26 OBS #2
		@su_anaacs("AB.TM.NIA01709",">=0.013","<=0.11", $sTrace, 10)		-- HIS_HVPS_P12V_CUR_MIN -- v1.20
		@su_anaacs("AB.TM.NIA01712",">=-0.11","<=-0.013", $sTrace, 10)		-- HIS_HVPS_N12V_CUR_MIN -- v1.20
		@su_anaacs("AB.TM.NIA01721",">=-0.0121","<=-0.009", $sTrace, 10)	-- HIS_LVPS_N5V_CUR_MIN
		@su_anaacs("AB.TM.NIA01724","NO","<=-0.017", $sTrace, 10)			-- HIS_LVPS_N12V_CUR_MIN -- v1.26 type
		@su_anaacs("AB.TM.NIA01727",">=3.20682","<=3.41548", $sTrace, 10)	-- HIS_LVPS_P3_3V_MIN
		@su_anaacs("AB.TM.NIA01730",">=0.027","<=0.0429", $sTrace, 10)		-- HIS_LVPS_P5V_CUR_MIN -- v1.20
		@su_anaacs("AB.TM.NIA01733",">=4.90432","<=5.21077", $sTrace, 10)	-- HIS_LVPS_P5V_MIN
		@su_anaacs("AB.TM.NIA01736",">=-5.22954","<=-4.97319", $sTrace, 10)	-- HIS_LVPS_N5V_MIN
		@su_anaacs("AB.TM.NIA01739",">=0.015","NO", $sTrace, 10)			-- HIS_LVPS_P12V_CUR_MINN -- v1.20

--		@su_anaacs("AB.TM.NIA01356",">=-40","<=80", $sTrace, 10)			-- his_lvps_ac_link_t_max -- v1.22
--		@su_anaacs("AB.TM.NIA01357",">=-40","<=80", $sTrace, 10)			-- HIS_LVPS_12V_DCDC_TMP_MAX -- v1.22
--		@su_anaacs("AB.TM.NIA01358",">=-40","<=80", $sTrace, 10)			-- HIS_LVPS_P3_3V_DCDC_TMP_MAX -- v1.22
--		@su_anaacs("AB.TM.NIA01359",">=-40","<=80", $sTrace, 10)			-- his_lvps_5V_dcdc_tmp_max -- v1.22
--		@su_anaacs("AB.TM.NIA01360",">=-40","<=80", $sTrace, 10)			-- HIS_PS_HVPS_TMP_MAX -- v1.22
--		@su_anaacs("AB.TM.NIA01361",">=-40","<=80", $sTrace, 10)			-- HIS_CDH_BOARD_TMP_MAX -- v1.22
--		@su_anaacs("AB.TM.NIA01362",">=-40","<=80", $sTrace, 10)			-- HIS_CDH_CPU_TMP_MAX -- v1.22
--		@su_anaacs("AB.TM.NIA01363",">=-40","<=80", $sTrace, 10)			-- HIS_HVPS_TMP_MAX -- v1.22

-- v1.26 OBS #1 temporary change due to new cal curve in database

		@su_rawacs("AB.TM.NIA01356","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01357","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01358","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01359","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01360","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01361","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01362","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01363","NO",0x0, 0x0, $sTrace, 120) 

		@su_anaacs("AB.TM.NIA01364",">=-0.01","<=0.1683", $sTrace, 10)		-- his_lvps_ac_link_i_max
		@su_anaacs("AB.TM.NIA01365",">=0","<=24.3716", $sTrace, 10)			-- his_lvps_ac_link_v_max
		@su_anaacs("AB.TM.NIA01366",">=-13.2","<=-12.3481", $sTrace, 10)	-- HIS_LVPS_N12V_MAX
		@su_anaacs("AB.TM.NIA01367",">=1.72078","<=1.82825", $sTrace, 10)	-- his_cdh_p1_8v_v_max
		@su_anaacs("AB.TM.NIA01368",">=1.4453","<=1.53676", $sTrace, 10)	-- his_cdh_p1_5v_v_max
		@su_anaacs("AB.TM.NIA01369",">=12.04837","<=12.80496", $sTrace, 10)	-- HIS_LVPS_P12V_MAX
		@su_anaacs("AB.TM.NIA01370",">=0.239","<=0.448", $sTrace, 10)		-- HIS_LVPS_P3_3V_CUR_MAX
		@su_anaacs("AB.TM.NIA01371",">=-0.618","<=0", $sTrace, 10)			-- HIS_HVPS_MAIN_NEG_MAX
		@su_anaacs("AB.TM.NIA01372",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_TOP_DEF_MAX
		@su_anaacs("AB.TM.NIA01373",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_BOT_DEF_MAX
		@su_anaacs("AB.TM.NIA01373",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_BOT_DEF_MAX
		@su_anaacs("AB.TM.NIA01339",">=-49.9","<=80", $sTrace, 10)			-- his_eais_port_tmp_t_max -- v1.20
		@su_anaacs("AB.TM.NIA01342",">=0","<=0.618", $sTrace, 10)			-- HIS_HVPS_MAIN_POS_MAX
		@su_anaacs("AB.TM.NIA01345",">=-0.618","<=0", $sTrace, 10)			-- HIS_HVPS_ANL_MAX
		@su_anaacs("AB.TM.NIA01348",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_TOP_PLATE_MAX
		@su_anaacs("AB.TM.NIA01351",">=-2.64","<=0", $sTrace, 10)			-- HIS_PA_HVPS_VOLT_M_MAX
		@su_anaacs("AB.TM.NIA01701",">=4.93317","<=5.08674", $sTrace, 10)	-- his_cdh_p5v_dac_v_max
		@su_anaacs("AB.TM.NIA01704",">=3.28086","<=3.346853", $sTrace, 10)	-- his_cdh_p3_3v_adc_v_max
		@su_anaacs("AB.TM.NIA01707",">=9.0","<=25.0", $sTrace, 10)			-- his_cdh_ground_v_max -- v1.26 OBS #2
		@su_anaacs("AB.TM.NIA01710",">=0.013","<=0.11", $sTrace, 10)		-- HIS_HVPS_P12V_CUR_MAX -- v1.20
		@su_anaacs("AB.TM.NIA01713",">=-0.11","<=-0.013", $sTrace, 10)		-- HIS_HVPS_N12V_CUR_MAX -- v1.20
		@su_anaacs("AB.TM.NIA01722",">=-0.0121","<=-0.009", $sTrace, 10)	-- HIS_LVPS_N5V_CUR_MAX
		@su_anaacs("AB.TM.NIA01725","NO",">=-0.017", $sTrace, 10)			-- HIS_LVPS_N12V_CUR_MAX -- v1.26 typo
		@su_anaacs("AB.TM.NIA01728",">=3.20682","<=3.41548", $sTrace, 10)	-- HIS_LVPS_P3_3V_MAX
		@su_anaacs("AB.TM.NIA01731",">=0.027","<=0.0429", $sTrace, 10)		-- HIS_LVPS_P5V_CUR_MAX -- v1.20
		@su_anaacs("AB.TM.NIA01734",">=4.90432","<=5.21077", $sTrace, 10)	-- HIS_LVPS_P5V_MAX
		@su_anaacs("AB.TM.NIA01737",">=-5.22954","<=-4.97319", $sTrace, 10)	-- HIS_LVPS_N5V_MAX
		@su_anaacs("AB.TM.NIA01740",">=0.015","NO", $sTrace, 10)			-- HIS_LVPS_P12V_CUR_MAX -- v1.20

		@SU_SEQPHASE2(3, "8.1.18 - *WAIT*, 0:00:10, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(10)

		@SU_SEQPHASE2(3, "8.1.19 - Verify BOOT image checksum is correct", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58603")

		@SU_SEND({ AB.TC.ZIA58055 , \
			PIA58056_ := "PROM" , \
			PIA60330_ := 0 , \
			PIA60329_ := 79840 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58603", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.1.20 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.1.21 - Verify MRAM write enable", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58900 , \
			PIA58999_ := "ENABLE" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "8.1.22 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)
		
		@SU_SEQPHASE2(3, "8.1.23 - Pre-zero memory test areas (MRAM)", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58605")

		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x10150000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 0 , \
			PIA60346_ := 0 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "COMPLETE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.1.24 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.1.25 - Pre-zero memory test areas (SRAM)", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58605")

		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x40080000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 0 , \
			PIA60346_ := 0 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "COMPLETE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.1.26 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.1.27 - Memory load to MRAM test area", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58053 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "MRAM" , \
			PIA60330_ := 0x15000 , \
			PIA60329_:OBV := 16 , \
			PIA60432_1:OBV  := 0 , \
			PIA60432_2:OBV  := 0 , \
			PIA60432_3:OBV  := 0 , \
			PIA60432_4:OBV  := 0 , \
			PIA60432_5:OBV  := 0 , \
			PIA60432_6:OBV  := 0 , \
			PIA60432_7:OBV  := 0 , \
			PIA60432_8:OBV  := 1 , \
			PIA60432_9:OBV  := 0 , \
			PIA60432_10:OBV := 0 , \
			PIA60432_11:OBV := 0 , \
			PIA60432_12:OBV := 2 , \
			PIA60432_13:OBV := 0 , \
			PIA60432_14:OBV := 0 , \
			PIA60432_15:OBV := 0 , \
			PIA60432_16:OBV := 3 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.1.28 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.1.29 - Copy from MRAM test area to SRAM test area", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58901 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59002_ := "MRAM" , \
			PIA60349_ := 0x150000 , \
			PIA59001_ := "SRAM" , \
			PIA60348_ := 0x80000 , \
			PIA60329_ := 16 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.1.30 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)
		
		@SU_SEQPHASE2(3, "8.1.31 - Verify MRAM write disable", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58900 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58999_ := "DISABLE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.1.32 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.1.33 - Verify memory load to MRAM test area", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58605")

		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x10150000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 0 , \
			PIA60346_ := 0 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "VERIFY_ONLY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.1.34 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.1.35 - Verify memory load to SRAM test area", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58605")

		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x40080000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 0 , \
			PIA60346_ := 0 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "VERIFY_ONLY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.1.36 - Verify no command rejections", *$sNumPha, "",  $sTitle)
		
		@su_ipvacs("AB.TM.NIA03005","=0","=0", $sTrace, 10) 		-- HIS_CMD_REJ_CNT
		@su_ipvacs("AB.TM.NIA03008","=0","=0", $sTrace, 10)		-- command_rejected_last_service
		@su_ipvacs("AB.TM.NIA03009","=0","=0", $sTrace, 10)		-- command_rejected_last_subservice

		@SU_SEQPHASE2(3, "8.1.37 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.1.38 - Verify intentional command rejection", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "HK_ACCUM_SECS" , \
			PIA60352_ := 1 }, $s_Trace, VER := "NACK", TIMEOUT_VER := 60) -- v1.22

		@su_ipvacs("AB.TM.NIA03005","=1","=1", $sTrace, 60) 		-- HIS_CMD_REJ_CNT -- v1.22 -- v1.26 increased timeout
		@su_ipvacs("AB.TM.NIA03008","=204","=204", $sTrace, 10)		-- command_rejected_last_service -- v1.22
		@su_ipvacs("AB.TM.NIA03009","=147","=147", $sTrace, 10)		-- command_rejected_last_subservice -- v1.22

		@SU_SEQPHASE2(3, "8.1.39 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.1.40 - Verify clearing of command rejection", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58918 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59016_ := "CMDS_REJ_CNT"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@su_ipvacs("AB.TM.NIA03005","=0","=0", $sTrace, 60) 		-- HIS_CMD_REJ_CNT -- v1.22 -- v1.26 increased timeout

		@SU_SEQPHASE2(3, "8.1.41 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.1.42 - Verify clearing of command rejection", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58918 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59016_ := "CMDS_REJ_SVC"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@su_ipvacs("AB.TM.NIA03008","=0","=0", $sTrace, 60)		-- command_rejected_last_service -- v1.22 -- v1.26 increased timeout
		@su_ipvacs("AB.TM.NIA03009","=0","=0", $sTrace, 60)		-- command_rejected_last_subservice -- v1.22 -- v1.26 increased timeout

		@SU_SEQPHASE2(3, "8.1.43 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.1.44 - Verify memory dump packet received", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58500")

		@SU_SEND({ AB.TC.ZIA58054 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "ABSOLUTE" , \
			PIA60330_ := 0x10150000 , \
			PIA60329_ := 16 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58500", *$i_RptRefNb)
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58500.NIA01547","=","ABSOLUTE")
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58500.NIA01548","=0x10150000","=0x10150000")
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58500.NIA01549","=16","=16")
		stopreportflow $i_reportflowID

		**********************************************************************************				
		@SU_SEQPHASE2(2, "8.2 HIS Test Case 2: Aliveness Test", *$sNumPha, "",  $sTitle)
		**********************************************************************************	

		@SU_SEQPHASE2(3, "8.2.1 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)
		
		@SU_SEQPHASE2(3, "8.2.2 - Go to LVENG mode", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58917 , \
						PIA59011_ := "LVENG"}, $s_Trace, VER := "SKIP", TIMEOUT_VER := 60) -- v1.25					

--		@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 60) -- v1.23
		
 		@su_ipvacs("AB.TM.NIA03004","=0","=0", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03006","=0","=0", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03007","=0","=0", $s_Trace, 10)
	
		@SU_SEQPHASE2(3, "8.2.3 - *WAIT*, 0:00:17, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(17) -- v1.20

		@SU_SEQPHASE2(3, "8.2.4 - Enable command echoing", *$sNumPha, "",  $sTitle)	
		$i_reportflowID := startreportflow("AB.TM.YIA58627")

		@SU_SEND({ AB.TC.ZIA58927 , \
						PIA59000_ := "ENABLE", \
						PIA60359_ := 43827 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.2.5 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(1)
		
		@SU_SEQPHASE2(3, "8.2.6 - Command HK at 30 seconds", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58931 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59056_ := "HK_TREP" , \
			PIA60361_ := 30}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)	-- v1.20

		@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 60)
		
 		@su_ipvacs("AB.TM.NIA03004","=2","=2", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03006","=204","=204", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03007","=176","=176", $s_Trace, 10)
 					
		@SU_SEQPHASE2(3, "8.2.7 - Verify command echo enabled", *$sNumPha, "",  $sTitle)	

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58627", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.2.8 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(3)
		
		@SU_SEQPHASE2(3, "8.2.9 - Verify NOP ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58915 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 60)
		
 		@su_ipvacs("AB.TM.NIA03004","=3","=3", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03006","=204","=204", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03007","=143","=143", $s_Trace, 10)
	
		@SU_SEQPHASE2(3, "8.2.10 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.2.11 - Queue error messages", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "EV_QUEUE_BYPASS" , \
			PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
	
		@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 60)	
 		@su_ipvacs("AB.TM.NIA03000",">11","NO", $s_Trace, 10)

		@SU_SEQPHASE2(3, "8.2.12 - Verify time codes are arriving ", *$sNumPha, "",  $sTitle)	
		
		@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 60)	
 		@su_ipvacs("AB.TM.NIA03001",">0","NO", $s_Trace, 10) -- v1.20
	
		@SU_SEQPHASE2(3, "8.2.13 - Verify time codes are arriving ", *$sNumPha, "",  $sTitle)	
		
 		@su_ipvacs("AB.TM.NIA03025",">0","NO", $s_Trace, 10) -- v1.20
	
		@SU_SEQPHASE2(3, "8.2.14 - Wait for DSCB communication to complete", *$sNumPha, "",  $sTitle)	
		
		@SU_SEQPHASE2(3, "8.2.15 - Verify digital status", *$sNumPha, "",  $sTitle)	

		@SU_IPVacs("AB.TM.NIA03010",">90","NO", $sTrace, 240)    			-- HK.his_proc_idle

		@SU_IPVacs("AB.TM.NIA04400",">0","NO", $sTrace, 10)         		-- HK.pkt_creation_time_whole
		@SU_IPVacs("AB.TM.NIA04560","=0","=0", $sTrace, 10)         		-- HK.macro_current_wait
		@SU_IPVacs("AB.TM.NIA04561","=0","=0", $sTrace, 10)         		-- HK.macro_last_accepted_service
		@SU_IPVacs("AB.TM.NIA04562","=0","=0", $sTrace, 10)         		-- HK.macro_last_accepted_subservice
		@SU_IPVacs("AB.TM.NIA04563","=0","=0", $sTrace, 10)         		-- HK.macro_last_rejected_service
		@SU_IPVacs("AB.TM.NIA04564","=0","=0", $sTrace, 10)         		-- HK.macro_last_rejected_subservice
		@SU_IPVacs("AB.TM.NIA04567","=0","=0", $sTrace, 10)         		-- HK.con_test_cnt
		@SU_IPVacs("AB.TM.NIA04583","=0xFFF","=0xFFF", $sTrace, 10) 		-- HK.dscb_adc_waits
		@SU_IPVacs("AB.TM.NIA04588","=3","=3", $sTrace, 10)         		-- HK.lim_pers_voltage
		@SU_IPVacs("AB.TM.NIA04589","=3","=3", $sTrace, 10)         		-- HK.lim_pers_current
		@SU_IPVacs("AB.TM.NIA04590","=0","=0", $sTrace, 10)         		-- HK.dscb_wdog_count
		@SU_IPVacs("AB.TM.NIA04591","=6","=6", $sTrace, 10)         		-- HK.dscb_fpga_rev
		@SU_IPVacs("AB.TM.NIA04592","=0x14","=0x14", $sTrace, 10)   		-- HK.dscb_fpga_base
		@SU_IPVacs("AB.TM.NIA04594","=0","=0", $sTrace, 10)         		-- HK.dscb_corr_edac
		@SU_IPVacs("AB.TM.NIA04595","=0","=0", $sTrace, 10)         		-- HK.dscb_uncorr_edac
		@SU_IPVacs("AB.TM.NIA04599","=0","=0", $sTrace, 10)         		-- HK.dscb_naks
				
		@SU_SEQPHASE2(3, "8.2.16 - Verify analog telemetry being received from CDH", *$sNumPha, "",  $sTitle)	
		
--		@su_anaacs("AB.TM.NIA01392",">=-40","<=80", $sTrace, 10)            -- HK.his_lvps_ac_link_t_ave
--		@su_anaacs("AB.TM.NIA01393",">=-40","<=80", $sTrace, 10)            -- HK.HIS_LVPS_12V_DCDC_TMP_AVE
--		@su_anaacs("AB.TM.NIA01394",">=-40","<=80", $sTrace, 10)            -- HK.HIS_LVPS_P3_3V_DCDC_TMP_AVE
--		@su_anaacs("AB.TM.NIA01395",">=-40","<=80", $sTrace, 10)            -- HK.his_lvps_5V_dcdc_tmp_ave
--		@su_anaacs("AB.TM.NIA01396",">=-40","<=80", $sTrace, 10)            -- HK.HIS_PS_HVPS_TMP_AVE
--		@su_anaacs("AB.TM.NIA01397",">=-40","<=80", $sTrace, 10)            -- HK.HIS_CDH_BOARD_TMP_AVE
--		@su_anaacs("AB.TM.NIA01398",">=-40","<=80", $sTrace, 10)            -- HK.HIS_CDH_CPU_TMP_AVE
--		@su_anaacs("AB.TM.NIA01399",">=-40","<=80", $sTrace, 10)            -- HK.HIS_HVPS_TMP_AVE

-- v1.26 OBS #1 temporary change due to ne cal curve in database

		@su_rawacs("AB.TM.NIA01392","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01393","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01394","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01395","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01396","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01397","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01398","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01399","NO",0x0, 0x0, $sTrace, 120) 

		@su_anaacs("AB.TM.NIA01400",">=-0-01","<=0.1683", $sTrace, 10)   	-- HK.his_lvps_ac_link_i_ave
		@su_anaacs("AB.TM.NIA01401",">=0","<=24.3716", $sTrace, 10)         -- HK.his_lvps_ac_link_v_ave
		@su_anaacs("AB.TM.NIA01402",">=-13.2","<=-12.3481", $sTrace, 10)    -- HK.HIS_LVPS_N12V_AVE
		@su_anaacs("AB.TM.NIA01403",">=1.72078","<=1.82825", $sTrace, 10)   -- HK.his_cdh_p1_8v_v_ave
		@su_anaacs("AB.TM.NIA01404",">=1.4453","<=1.53676", $sTrace, 10)    -- HK.his_cdh_p1_5v_v_ave
		@su_anaacs("AB.TM.NIA01405",">=12.04837","<=12.80496", $sTrace, 10) -- HK.HIS_LVPS_P12V_AVE
		@su_anaacs("AB.TM.NIA01406",">=0.239","<=0.448", $sTrace, 10)       -- HK.HIS_LVPS_P3_3V_CUR_AVE
		@su_anaacs("AB.TM.NIA01407",">=-0.618","<=0", $sTrace, 10)          -- HK.HIS_HVPS_MAIN_NEG_AVE
		@su_anaacs("AB.TM.NIA01408",">=-0.618","<=0.618", $sTrace, 10)      -- HK.HIS_HVPS_TOP_DEF_AVE
		@su_anaacs("AB.TM.NIA01409",">=-0.618","<=0.618", $sTrace, 10)      -- HK.HIS_HVPS_BOT_DEF_AVE
		@su_anaacs("AB.TM.NIA01340",">=-49.9","<=80", $sTrace, 10)          	-- HK.his_eais_port_tmp_t_ave -- v1.20
		@su_anaacs("AB.TM.NIA01343",">=0","<=0.618", $sTrace, 10)           -- HK.HIS_HVPS_MAIN_POS_AVE
		@su_anaacs("AB.TM.NIA01346",">=-0.618","<=0", $sTrace, 10)          -- HK.HIS_HVPS_ANL_AVE
		@su_anaacs("AB.TM.NIA01349",">=-0.618","<=0.618", $sTrace, 10)      -- HK.HIS_HVPS_TOP_PLATE_AVE
		@su_anaacs("AB.TM.NIA01352",">=-2.64","<=0", $sTrace, 10)           -- HK.HIS_PA_HVPS_VOLT_M_AVE
		@su_anaacs("AB.TM.NIA01702",">=4.93317","<=5.08674", $sTrace, 10)   -- HK.his_cdh_p5v_dac_v_ave
		@su_anaacs("AB.TM.NIA01705",">=3.28086","<=3.346853", $sTrace, 10)  -- HK.his_cdh_p3_3v_adc_v_ave
		@su_anaacs("AB.TM.NIA01708",">=9.0","<=25.0", $sTrace, 10)          -- HK.his_cdh_ground_v_ave -- v1.26
		@su_anaacs("AB.TM.NIA01711",">=0.013","<=0.110", $sTrace, 10)       -- HK.HIS_HVPS_P12V_CUR_AVE -- v1.23
		@su_anaacs("AB.TM.NIA01714",">=-0.11","<=-0.013", $sTrace, 10)      -- HK.HIS_HVPS_N12V_CUR_AVE -- v1.26
		@su_anaacs("AB.TM.NIA01723",">=-0.0121","<=-0.009", $sTrace, 10)    -- HK.HIS_LVPS_N5V_CUR_AVE
		@su_anaacs("AB.TM.NIA01726","NO","<=-0.017", $sTrace, 10)     		-- HK.HIS_LVPS_N12V_CUR_AVE -- v1.26
		@su_anaacs("AB.TM.NIA01729",">=3.20682","<=3.41548", $sTrace, 10)   -- HK.HIS_LVPS_P3_3V_AVE
		@su_anaacs("AB.TM.NIA01732",">=0.027","<=0.0429", $sTrace, 10)      -- HK.HIS_LVPS_P5V_CUR_AVE -- v1.20
		@su_anaacs("AB.TM.NIA01735",">=4.90432","<=5.21077", $sTrace, 10)   -- HK.HIS_LVPS_P5V_AVE
		@su_anaacs("AB.TM.NIA01738",">=-5.22954","<=-4.97319", $sTrace, 10) -- HK.HIS_LVPS_N5V_AVE
		@su_anaacs("AB.TM.NIA01741",">=0.015","NO", $sTrace, 10)       		-- HK.HIS_LVPS_P12V_CUR_AVE -- v1.20
		
--		@su_anaacs("AB.TM.NIA01320",">=-40","<=80", $sTrace, 10)            -- his_lvps_ac_link_t_min
--		@su_anaacs("AB.TM.NIA01321",">=-40","<=80", $sTrace, 10)            -- HIS_LVPS_12V_DCDC_TMP_MIN
--		@su_anaacs("AB.TM.NIA01322",">=-40","<=80", $sTrace, 10)            -- HIS_LVPS_P3_3V_DCDC_TMP_MIN
--		@su_anaacs("AB.TM.NIA01323",">=-40","<=80", $sTrace, 10)            -- his_lvps_5V_dcdc_tmp_min
--		@su_anaacs("AB.TM.NIA01324",">=-40","<=80", $sTrace, 10)            -- HIS_PS_HVPS_TMP_MIN
--		@su_anaacs("AB.TM.NIA01325",">=-40","<=80", $sTrace, 10)            -- HIS_CDH_BOARD_TMP_MIN
--		@su_anaacs("AB.TM.NIA01326",">=-40","<=80", $sTrace, 10)            -- HIS_CDH_CPU_TMP_MIN
--		@su_anaacs("AB.TM.NIA01327",">=-40","<=80", $sTrace, 10)            -- HIS_HVPS_TMP_MIN

-- v1.26 OBS #1 temporary change due to new cal curve in database

		@su_rawacs("AB.TM.NIA01320","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01321","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01322","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01323","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01324","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01325","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01326","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01327","NO",0x0, 0x0, $sTrace, 120) 

		@su_anaacs("AB.TM.NIA01328",">=-0.01","<=0.1683", $sTrace, 10)		-- his_lvps_ac_link_i_min
		@su_anaacs("AB.TM.NIA01329",">=-0","<=24.3716", $sTrace, 10)		-- his_lvps_ac_link_v_min
		@su_anaacs("AB.TM.NIA01330",">=-13.2","<=-12.3481", $sTrace, 10)	-- HIS_LVPS_N12V_MIN
		@su_anaacs("AB.TM.NIA01331",">=1.72078","<=1.82825", $sTrace, 10)	-- his_cdh_p1_8v_v_min
		@su_anaacs("AB.TM.NIA01332",">=1.4453","<=1.53676", $sTrace, 10)	-- his_cdh_p1_5v_v_min
		@su_anaacs("AB.TM.NIA01333",">=12.04837","<=12.80496", $sTrace, 10)	-- HIS_LVPS_P12V_MIN
		@su_anaacs("AB.TM.NIA01334",">=0.239","<=0.448", $sTrace, 10)	    	-- HIS_LVPS_P3_3V_CUR_MIN
		@su_anaacs("AB.TM.NIA01335",">=-0.618","<=0", $sTrace, 10)			-- HIS_HVPS_MAIN_NEG_MIN
		@su_anaacs("AB.TM.NIA01336",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_TOP_DEF_MIN
		@su_anaacs("AB.TM.NIA01337",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_BOT_DEF_MIN
		@su_anaacs("AB.TM.NIA01338",">=-49.9","<=80", $sTrace, 10)			-- his_eais_port_tmp_t_min -- v1.20
		@su_anaacs("AB.TM.NIA01341",">=0","<=0.618", $sTrace, 10)			-- HIS_HVPS_MAIN_POS_MIN
		@su_anaacs("AB.TM.NIA01344",">=-0.618","<=0", $sTrace, 10)			-- HIS_HVPS_ANL_MIN
		@su_anaacs("AB.TM.NIA01347",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_TOP_PLATE_MIN
		@su_anaacs("AB.TM.NIA01350",">=-2.64","<=0", $sTrace, 10)			-- HIS_PA_HVPS_VOLT_M_MIN
		@su_anaacs("AB.TM.NIA01700",">=4.93317","<=5.08674", $sTrace, 10)	-- his_cdh_p5v_dac_v_min
		@su_anaacs("AB.TM.NIA01703",">=3.28086","<=3.346853", $sTrace, 10)	-- his_cdh_p3_3v_adc_v_min
		@su_anaacs("AB.TM.NIA01706",">=9.0","<=25.0", $sTrace, 10)			-- his_cdh_ground_v_min -- v1.26
		@su_anaacs("AB.TM.NIA01709",">=0.013","<=0.11", $sTrace, 10)		-- HIS_HVPS_P12V_CUR_MIN -- v1.20
		@su_anaacs("AB.TM.NIA01712",">=-0.11","<=-0.013", $sTrace, 10)		-- HIS_HVPS_N12V_CUR_MIN -- v1.20
		@su_anaacs("AB.TM.NIA01721",">=-0.0121","<=-0.009", $sTrace, 10)	-- HIS_LVPS_N5V_CUR_MIN
		@su_anaacs("AB.TM.NIA01724","NO","<=-0.017", $sTrace, 10)			-- HIS_LVPS_N12V_CUR_MIN -- v1.26
		@su_anaacs("AB.TM.NIA01727",">=3.20682","<=3.41548", $sTrace, 10)	-- HIS_LVPS_P3_3V_MIN
		@su_anaacs("AB.TM.NIA01730",">=0.027","<=0.0429", $sTrace, 10)		-- HIS_LVPS_P5V_CUR_MIN -- v1.20
		@su_anaacs("AB.TM.NIA01733",">=4.90432","<=5.21077", $sTrace, 10)	-- HIS_LVPS_P5V_MIN
		@su_anaacs("AB.TM.NIA01736",">=-5.22954","<=-4.97319", $sTrace, 10)	-- HIS_LVPS_N5V_MIN
		@su_anaacs("AB.TM.NIA01739",">=0.015","NO", $sTrace, 10)			-- HIS_LVPS_P12V_CUR_MINN -- v1.20

--		@su_anaacs("AB.TM.NIA01356",">=-40","<=80", $sTrace, 10)			-- his_lvps_ac_link_t_max -- v1.23
--		@su_anaacs("AB.TM.NIA01357",">=-40","<=80", $sTrace, 10)			-- HIS_LVPS_12V_DCDC_TMP_MAX -- v1.23
--		@su_anaacs("AB.TM.NIA01358",">=-40","<=80", $sTrace, 10)			-- HIS_LVPS_P3_3V_DCDC_TMP_MAX -- v1.23
--		@su_anaacs("AB.TM.NIA01359",">=-40","<=80", $sTrace, 10)			-- his_lvps_5V_dcdc_tmp_max -- v1.23
--		@su_anaacs("AB.TM.NIA01360",">=-40","<=80", $sTrace, 10)			-- HIS_PS_HVPS_TMP_MAX -- v1.23
--		@su_anaacs("AB.TM.NIA01361",">=-40","<=80", $sTrace, 10)			-- HIS_CDH_BOARD_TMP_MAX -- v1.23
--		@su_anaacs("AB.TM.NIA01362",">=-40","<=80", $sTrace, 10)			-- HIS_CDH_CPU_TMP_MAX -- v1.23
--		@su_anaacs("AB.TM.NIA01363",">=-40","<=80", $sTrace, 10)			-- HIS_HVPS_TMP_MAX -- v1.23

-- v1.26 OBS #1 temporary change due to new cal curve in database

		@su_rawacs("AB.TM.NIA01356","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01357","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01358","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA01359","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01360","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01361","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01362","NO",0x0, 0x0, $sTrace, 120) 
		@su_rawacs("AB.TM.NIA01363","NO",0x0, 0x0, $sTrace, 120) 

		@su_anaacs("AB.TM.NIA01364",">=-0.01","<=0.1683", $sTrace, 10)		-- his_lvps_ac_link_i_max
		@su_anaacs("AB.TM.NIA01365",">=0","<=24.3716", $sTrace, 10)			-- his_lvps_ac_link_v_max
		@su_anaacs("AB.TM.NIA01366",">=-13.2","<=-12.3481", $sTrace, 10)	-- HIS_LVPS_N12V_MAX
		@su_anaacs("AB.TM.NIA01367",">=1.72078","<=1.82825", $sTrace, 10)	-- his_cdh_p1_8v_v_max
		@su_anaacs("AB.TM.NIA01368",">=1.4453","<=1.53676", $sTrace, 10)	-- his_cdh_p1_5v_v_max
		@su_anaacs("AB.TM.NIA01369",">=12.04837","<=12.80496", $sTrace, 10)	-- HIS_LVPS_P12V_MAX
		@su_anaacs("AB.TM.NIA01370",">=0.239","<=0.448", $sTrace, 10)		-- HIS_LVPS_P3_3V_CUR_MAX
		@su_anaacs("AB.TM.NIA01371",">=-0.618","<=0", $sTrace, 10)			-- HIS_HVPS_MAIN_NEG_MAX
		@su_anaacs("AB.TM.NIA01372",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_TOP_DEF_MAX
		@su_anaacs("AB.TM.NIA01373",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_BOT_DEF_MAX
		@su_anaacs("AB.TM.NIA01373",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_BOT_DEF_MAX
		@su_anaacs("AB.TM.NIA01339",">=-49.9","<=80", $sTrace, 10)			-- his_eais_port_tmp_t_max -- v1.20
		@su_anaacs("AB.TM.NIA01342",">=0","<=0.618", $sTrace, 10)			-- HIS_HVPS_MAIN_POS_MAX
		@su_anaacs("AB.TM.NIA01345",">=-0.618","<=0", $sTrace, 10)			-- HIS_HVPS_ANL_MAX
		@su_anaacs("AB.TM.NIA01348",">=-0.618","<=0.618", $sTrace, 10)		-- HIS_HVPS_TOP_PLATE_MAX
		@su_anaacs("AB.TM.NIA01351",">=-2.64","<=0", $sTrace, 10)			-- HIS_PA_HVPS_VOLT_M_MAX
		@su_anaacs("AB.TM.NIA01701",">=4.93317","<=5.08674", $sTrace, 10)	-- his_cdh_p5v_dac_v_max
		@su_anaacs("AB.TM.NIA01704",">=3.28086","<=3.346853", $sTrace, 10)	-- his_cdh_p3_3v_adc_v_max
		@su_anaacs("AB.TM.NIA01707",">=9.0","<=25.0", $sTrace, 10)			-- his_cdh_ground_v_max -- v1.27
		@su_anaacs("AB.TM.NIA01710",">=0.013","<=0.11", $sTrace, 10)		-- HIS_HVPS_P12V_CUR_MAX -- v1.20
		@su_anaacs("AB.TM.NIA01713",">=-0.11","<=-0.013", $sTrace, 10)		-- HIS_HVPS_N12V_CUR_MAX -- v1.20
		@su_anaacs("AB.TM.NIA01722",">=-0.0121","<=-0.009", $sTrace, 10)	-- HIS_LVPS_N5V_CUR_MAX
		@su_anaacs("AB.TM.NIA01725","NO","<=-0.017", $sTrace, 10)			-- HIS_LVPS_N12V_CUR_MAX -- v1.26
		@su_anaacs("AB.TM.NIA01728",">=3.20682","<=3.41548", $sTrace, 10)	-- HIS_LVPS_P3_3V_MAX
		@su_anaacs("AB.TM.NIA01731",">=0.027","<=0.0429", $sTrace, 10)		-- HIS_LVPS_P5V_CUR_MAX -- v1.20
		@su_anaacs("AB.TM.NIA01734",">=4.90432","<=5.21077", $sTrace, 10)	-- HIS_LVPS_P5V_MAX
		@su_anaacs("AB.TM.NIA01737",">=-5.22954","<=-4.97319", $sTrace, 10)	-- HIS_LVPS_N5V_MAX
		@su_anaacs("AB.TM.NIA01740",">=0.015","NO", $sTrace, 10)			-- HIS_LVPS_P12V_CUR_MAX -- v1.20

		@SU_SEQPHASE2(3, "8.2.17 - *WAIT*, 0:00:05, From previous command", *$sNumPha, "",  $sTitle)	
		-- Verify analog telemetry being received from DSCB
				
		@su_anaacs("AB.TM.NIA04653",">=0","<=0.33", $sTrace, 120)            -- HK.HIS_STARTMCPVMON_AVE
		@su_anaacs("AB.TM.NIA04654",">=0","<=0.33", $sTrace, 120)            -- HK.HIS_STOPMCPVMON_AVE
		@su_anaacs("AB.TM.NIA04655",">=0","<=110", $sTrace, 120)             -- HK.HIS_SSDVMON_AVE
		@su_anaacs("AB.TM.NIA04656",">=0","<=0.145", $sTrace, 120)           -- HK.HIS_OFFSETVMON_AVE
		@su_anaacs("AB.TM.NIA04657",">=0","<=11.604", $sTrace, 120)          -- HK.HIS_STARTMCPIMON_AVE
		@su_anaacs("AB.TM.NIA04658",">=0","<=15.211", $sTrace, 120)          -- HK.HIS_STOPMCPIMON_AVE

--		@su_anaacs("AB.TM.NIA04659",">=-40","<=80", $sTrace, 120)            -- HK.HIS_STOP_TEMP_AVE
--		@su_anaacs("AB.TM.NIA04660",">=-40","<=80", $sTrace, 120)            -- HK.HIS_DSCB_TEMP_AVE

-- v1.26 OBS #1 temporary change due to new cal curve in database

		@su_rawacs("AB.TM.NIA04659","NO",0x0, 0x0, $sTrace, 120)
		@su_rawacs("AB.TM.NIA04660","NO",0x0, 0x0, $sTrace, 120)

		@su_anaacs("AB.TM.NIA04661",">=4.9098","<=5.0601", $sTrace, 120)     -- HK.HIS_P5V_DAC_REF_MON_AVE
		@su_anaacs("AB.TM.NIA04662",">=3.26242","<=3.345645", $sTrace, 120)  -- HK.HIS_P3_3V_ADC_REF_AVE
		@su_anaacs("AB.TM.NIA04663",">=4.91176","<=5.06212", $sTrace, 120)   -- HK.HIS_P5V_ADC_REF_MON_AVE
		@su_anaacs("AB.TM.NIA04664",">=0","<=4095", $sTrace, 120)            -- HK.HIS_ASIC_MON_AVE
		@su_anaacs("AB.TM.NIA04665",">=3.19809","<=3.39591", $sTrace, 120)   -- HK.HIS_P3_3V_AVE
		@su_anaacs("AB.TM.NIA04666",">=1.42595","<=1.57815", $sTrace, 120)   -- HK.HIS_P1_5V_AVE
		@su_anaacs("AB.TM.NIA04667",">=0","<=4", $sTrace, 120)               -- HK.HIS_SSDIMON_AVE
		@su_anaacs("AB.TM.NIA04668",">=0","<=5", $sTrace, 120)               -- HK.HIS_OFFSETIMON_AVE
		@su_anaacs("AB.TM.NIA04669",">=0.0061","<=0.0156", $sTrace, 120)     -- HK.HIS_V_IMON_REF_AVE

--		@su_anaacs("AB.TM.NIA04670",">=-40","<=80", $sTrace, 120)            -- HK.HIS_HVPS_TEMP_AVE
--		@su_anaacs("AB.TM.NIA04671",">=-40","<=80", $sTrace, 120)            -- HK.HIS_DSIB_TEMP_AVE
--		@su_anaacs("AB.TM.NIA04672",">=-40","<=80", $sTrace, 120)            -- HK.HIS_SSD_TEMP_AVE
--		@su_anaacs("AB.TM.NIA04673",">=-40","<=80", $sTrace, 120)            -- HK.HIS_ASIC_TEMP_AVE
--		@su_anaacs("AB.TM.NIA04674",">=-40","<=80", $sTrace, 120)            -- HK.HIS_START_TEMP_AVE

-- v1.26 OBS #1 temporary change due to new cal curve in database

				@su_rawacs("AB.TM.NIA04670","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04671","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04672","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04673","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04674","NO",0x0, 0x0, $sTrace, 120) 
								
		@su_anaacs("AB.TM.NIA04609",">=0.0","<=0.33", $sTrace, 10)			-- HIS_STARTMCPVMON_MIN
		@su_anaacs("AB.TM.NIA04610",">=0.0","<=0.33", $sTrace, 10)			-- HIS_STOPMCPVMON_MIN
		@su_anaacs("AB.TM.NIA04611",">=0.0","<=110", $sTrace, 10)			-- HIS_SSDVMON_MIN
		@su_anaacs("AB.TM.NIA04612",">=0.0","<=0.145", $sTrace, 10)			-- HIS_OFFSETVMON_MIN
		@su_anaacs("AB.TM.NIA04613",">=0.0","<=11.604", $sTrace, 10)		-- HIS_STARTMCPIMON_MIN
		@su_anaacs("AB.TM.NIA04614",">=0.0","<=15.211", $sTrace, 10)		-- HIS_STOPMCPIMON_MIN

--		@su_anaacs("AB.TM.NIA04615",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_STOP_TEMP_MIN
--		@su_anaacs("AB.TM.NIA04616",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_DSCB_TEMP_MIN

-- v1.26 OBS #1 temporary change due to new cal curve in database

				@su_rawacs("AB.TM.NIA04615","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04616","NO",0x0, 0x0, $sTrace, 120) 

		@su_anaacs("AB.TM.NIA04617",">=4.9098","<=5.0601", $sTrace, 10)		-- HIS_P5V_DAC_REF_MON_MIN
		@su_anaacs("AB.TM.NIA04618",">=3.26242","<=3.345645", $sTrace, 10)	-- HIS_P3_3V_ADC_REF_MIN
		@su_anaacs("AB.TM.NIA04619",">=4.91176","<=5.06212", $sTrace, 10)	-- HIS_P5V_ADC_REF_MON_MIN
		@su_anaacs("AB.TM.NIA04620",">=0","<=4095", $sTrace, 10)			-- HIS_ASIC_MON_MIN
		@su_anaacs("AB.TM.NIA04621",">=3.19809","<=3.39591", $sTrace, 10)	-- HIS_P3_3V_MIN
		@su_anaacs("AB.TM.NIA04622",">=1.42595","<=1.57815", $sTrace, 10)	-- HIS_P1_5V_MIN
		@su_anaacs("AB.TM.NIA04623",">=0.0","<=4.0", $sTrace, 10)			-- HIS_SSDIMON_MIN
		@su_anaacs("AB.TM.NIA04624",">=0.0","<=5.0", $sTrace, 10)			-- HIS_OFFSETIMON_MIN
		@su_anaacs("AB.TM.NIA04625",">=0.0061","<=0.0156", $sTrace, 10)		-- HIS_V_IMON_REF_MIN -- v1.23

--		@su_anaacs("AB.TM.NIA04626",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_HVPS_TEMP_MIN
--		@su_anaacs("AB.TM.NIA04627",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_DSIB_TEMP_MIN
--		@su_anaacs("AB.TM.NIA04628",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_SSD_TEMP_MINN
--		@su_anaacs("AB.TM.NIA04629",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_ASIC_TEMP_MIN
--		@su_anaacs("AB.TM.NIA04630",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_START_TEMP_MIN

-- v1.26 OBS #1 temporary change due to new cal curve in database

				@su_rawacs("AB.TM.NIA04626","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04627","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04628","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04629","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04630","NO",0x0, 0x0, $sTrace, 120) 

		@su_anaacs("AB.TM.NIA04631",">=0.0","<=0.33", $sTrace, 10)			-- HIS_STARTMCPVMON_MAX
		@su_anaacs("AB.TM.NIA04632",">=0.0","<=0.33", $sTrace, 10)			-- HIS_STOPMCPVMON_MAX

		@su_anaacs("AB.TM.NIA04633",">=0.0","<=110", $sTrace, 10)			-- HIS_SSDVMON_MAX
		@su_anaacs("AB.TM.NIA04634",">=0.0","<=0.145", $sTrace, 10)			-- HIS_OFFSETVMON_MAX
		@su_anaacs("AB.TM.NIA04635",">=0.0","<=11.604", $sTrace, 10)		-- HIS_STARTMCPIMON_MAX
		@su_anaacs("AB.TM.NIA04636",">=0.0","<=15.211", $sTrace, 10)		-- HIS_STOPMCPIMON_MAX

--		@su_anaacs("AB.TM.NIA04637",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_STOP_TEMP_MAX
--		@su_anaacs("AB.TM.NIA04638",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_DSCB_TEMP_MAX

-- v1.26 OBS #1 temporary change due to new cal curve in database

				@su_rawacs("AB.TM.NIA04637","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04638","NO",0x0, 0x0, $sTrace, 120) 

		@su_anaacs("AB.TM.NIA04639",">=4.9098","<=5.0601", $sTrace, 10)		-- HIS_P5V_DAC_REF_MON_MAX
		@su_anaacs("AB.TM.NIA04640",">=3.26242","<=3.345645", $sTrace, 10)	-- HIS_P3_3V_ADC_REF_MAX
		@su_anaacs("AB.TM.NIA04641",">=4.91176","<=5.06212", $sTrace, 10)	-- HIS_P5V_ADC_REF_MON_MAX
		@su_anaacs("AB.TM.NIA04642",">=0.0","<=4095", $sTrace, 10)			-- HIS_ASIC_MON_MAX
		@su_anaacs("AB.TM.NIA04643",">=3.19809","<=3.39591", $sTrace, 10)	-- HIS_P3_3V_MAX
		@su_anaacs("AB.TM.NIA04644",">=1.42595","<=1.57815", $sTrace, 10)	-- HIS_P1_5V_MAX
		@su_anaacs("AB.TM.NIA04645",">=0.0","<=4.0", $sTrace, 10)			-- HIS_SSDIMON_MAX
		@su_anaacs("AB.TM.NIA04646",">=0.0","<=5.0", $sTrace, 10)			-- HIS_OFFSETIMON_MAX
		@su_anaacs("AB.TM.NIA04647",">=0.0061","<=0.0156", $sTrace, 10)		-- HIS_V_IMON_REF_MAX

		@su_anaacs("AB.TM.NIA04648",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_HVPS_TEMP_MAX
		@su_anaacs("AB.TM.NIA04649",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_DSIB_TEMP_MAX
		@su_anaacs("AB.TM.NIA04650",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_SSD_TEMP_MAX
		@su_anaacs("AB.TM.NIA04651",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_ASIC_TEMP_MAX
		@su_anaacs("AB.TM.NIA04652",">=-40.0","<=80.0", $sTrace, 10)		-- HIS_START_TEMP_MAX

-- v1.26 OBS #1 temporary change due to new cal curve in database

				@su_rawacs("AB.TM.NIA04648","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04649","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04650","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04651","NO",0x0, 0x0, $sTrace, 120) 
				@su_rawacs("AB.TM.NIA04652","NO",0x0, 0x0, $sTrace, 120) 

		@SU_SEQPHASE2(3, "8.2.18 - *WAIT*, 0:00:05, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(5)

		@SU_SEQPHASE2(3, "8.2.19 - Verify BOOT image checksum is correct", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58603")

		@SU_SEND({ AB.TC.ZIA58055 , \
			PIA58056_ := "PROM" , \
			PIA60330_ := 0 , \
			PIA60329_ := 79840 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58603", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.2.20 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.2.21 - Verify MRAM write enable", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58900 , \
			PIA58999_ := "ENABLE" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "8.2.22 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)
		
		@SU_SEQPHASE2(3, "8.2.23 - Pre-zero memory test areas (MRAM)", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58605")
	
		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x10150000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 0 , \
			PIA60346_ := 0 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "COMPLETE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.2.24 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "xxx - Pre-zero memory test areas (SRAM)", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58605")
	
		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x40080000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 0 , \
			PIA60346_ := 0 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "COMPLETE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.2.25 - *WAIT*, 0:00:04, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(4)

		@SU_SEQPHASE2(3, "8.2.26 - ", *$sNumPha, "",  $sTitle)

		$i_reportflowID := startreportflow("AB.TM.YIA58605")
	
		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x40080000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 0 , \
			PIA60346_ := 0 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "COMPLETE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.2.27 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.2.28 - Memory load to MRAM test area", *$sNumPha, "",  $sTitle)
			
		@SU_SEND({ AB.TC.ZIA58053 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "MRAM" , \
			PIA60330_ := 0x15000 , \
			PIA60329_:OBV := 16 , \
			PIA60432_1:OBV  := 0 , \
			PIA60432_2:OBV  := 0 , \
			PIA60432_3:OBV  := 0 , \
			PIA60432_4:OBV  := 7 , \
			PIA60432_5:OBV  := 0 , \
			PIA60432_6:OBV  := 0 , \
			PIA60432_7:OBV  := 0 , \
			PIA60432_8:OBV  := 6 , \
			PIA60432_9:OBV  := 0 , \
			PIA60432_10:OBV := 0 , \
			PIA60432_11:OBV := 0 , \
			PIA60432_12:OBV := 5 , \
			PIA60432_13:OBV := 0 , \
			PIA60432_14:OBV := 0 , \
			PIA60432_15:OBV := 0 , \
			PIA60432_16:OBV := 4 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.2.29 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.2.30 - Copy from MRAM test area to SRAM test area", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58901 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59002_ := "MRAM" , \
			PIA60349_ := 0x160000 , \
			PIA59001_ := "SRAM" , \
			PIA60348_ := 0x80000 , \
			PIA60329_ := 16 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.2.31 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)
		
		@SU_SEQPHASE2(3, "8.2.32 - Verify MRAM write disable", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58900 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58999_ := "DISABLE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.2.33 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.2.34 - Verify memory load to MRAM test area", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58605")

		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x10160000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 7 , \
			PIA60346_ := -1 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "VERIFY_ONLY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.2.35 - *WAIT*, 0:00:10, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(10)

		@SU_SEQPHASE2(3, "8.2.36 - Verify copy from MRAM test area to SRAM test area", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58605")
	
		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x40080000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 7 , \
			PIA60346_ := -1 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "VERIFY_ONLY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.2.37 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(03)
		
		@SU_SEQPHASE2(3, "8.2.38 - Memory load to BRAM test area", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58053 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "CDH_SRAM" , \
			PIA60330_ := 0 , \
			PIA60329_:OBV := 16 , \
			PIA60432_1:OBV  := 0 , \
			PIA60432_2:OBV  := 0 , \
			PIA60432_3:OBV  := 0 , \
			PIA60432_4:OBV  := 7 , \
			PIA60432_5:OBV  := 0 , \
			PIA60432_6:OBV  := 0 , \
			PIA60432_7:OBV  := 0 , \
			PIA60432_8:OBV  := 6 , \
			PIA60432_9:OBV  := 0 , \
			PIA60432_10:OBV := 0 , \
			PIA60432_11:OBV := 0 , \
			PIA60432_12:OBV := 5 , \
			PIA60432_13:OBV := 0 , \
			PIA60432_14:OBV := 0 , \
			PIA60432_15:OBV := 0 , \
			PIA60432_16:OBV := 4 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.2.39 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.2.40 - Verify memory load to BRAM test area", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58605")

		@SU_SEND({ AB.TC.ZIA58902 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59004_ := "ABSOLUTE" , \
			PIA60350_ := 0x60000000 , \
			PIA60329_ := 16 , \
			PIA60352_ := 7 , \
			PIA60346_ := -1 , \
			PIA59045_ := "STANDARD" , \
			PIA59046_ := "VERIFY_ONLY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58605", *$i_RptRefNb)

		@SU_SEQPHASE2(3, "8.2.41 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)
		
		@SU_SEQPHASE2(3, "8.2.42 - Verify intentional command rejection", *$sNumPha, "",  $sTitle)
		
  		@su_ipvacs("AB.TM.NIA03005","=0","=0", $s_Trace, 10) -- v1.23
		@su_ipvacs("AB.TM.NIA03008","=0","=0", $s_Trace, 10) -- is this the correct parameter ? -- v1.23
 		@su_ipvacs("AB.TM.NIA03009","=0","=0", $s_Trace, 10) -- is this the correct parameter ? -- v1.23

		@SU_SEND({ AB.TC.ZIA58931 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59056_ := "BOOT_TREP" , \
			PIA60361_ := 1 }, $s_Trace, VER := "NEXEC", TIMEOUT_VER := 60) -- v1.23

		@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 60)
		
 		@su_ipvacs("AB.TM.NIA03005","=1","=1", $s_Trace, 10) -- v1.23
 		@su_ipvacs("AB.TM.NIA03008","=204","=204", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03009","=176","=176", $s_Trace, 10)
 
		@SU_SEQPHASE2(3, "8.2.43 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.2.44 - Verify clearing of command rejection", *$sNumPha, "",  $sTitle)
		
		@SU_SEND({ AB.TC.ZIA58918 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59016_ := "CMDS_REJ_CNT"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 60)
		
 		@su_ipvacs("AB.TM.NIA03005","=0","=0", $s_Trace, 10)

		@SU_SEQPHASE2(3, "8.2.45 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.2.46 - Verify clearing of command rejection", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58918 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59016_ := "CMDS_REJ_SVC"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 60)
		
 		@su_ipvacs("AB.TM.NIA03008","=0","=0", $s_Trace, 10)
 		@su_ipvacs("AB.TM.NIA03009","=0","=0", $s_Trace, 10)

		@SU_SEQPHASE2(3, "8.2.47 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)
		
		@SU_SEQPHASE2(3, "8.2.48 - Verify memory dump packet received", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58500")

		@SU_SEND({ AB.TC.ZIA58054 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58056_ := "ABSOLUTE" , \
			PIA60330_ := 0x10160000 , \
			PIA60329_ := 16 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58500", *$i_RptRefNb)
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58500.NIA01547","=","ABSOLUTE")
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58500.NIA01548","=0x10160000","=0x10160000")
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58500.NIA01549","=16","=16")
		stopreportflow $i_reportflowID

		**********************************************************************************				
		@SU_SEQPHASE2(2, "8.3	HIS Test Case 3: Full Command & Telemetry Test", *$sNumPha, "",  $sTitle)
		**********************************************************************************	

		@SU_SEQPHASE2(3, "8.3.1 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.2 - Verify no EDAC errors", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58500")
 
		@SU_SEND({ AB.TC.ZIA58904 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59003_ := "ABSOLUTE" , \
			PIA60350_ := 0 , \
			PIA60329_ := 16 , \
			PIA60342_ := 0xFFFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58500", *$i_RptRefNb)
		@SU_DIGRC($i_RptRefNb,"AB.TM.YIA58500.NIA01547","=","ABSOLUTE")
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58500.NIA01548","=0x0","=0x0")
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58500.NIA01549","=16","=16")
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.3.3 - *WAIT*, 0:00:11, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(11)
	
		@SU_SEQPHASE2(3, "8.3.4 - Verify memory dwell disable", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58905 , \
			SHF:OBV := 0 , \
			SID:OBV := 120}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.5 - *WAIT*, 0:00:21, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(21)
	
		@SU_SEQPHASE2(3, "8.3.6 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.7 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)
	
		@SU_SEQPHASE2(3, "8.3.8 - Verify safe mode command", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "SAFE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.9 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.10 - Verify HIS is in LVENG mode", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "LVENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.11 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.12 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.13 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.14 - Verify DSCB reg read", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58607")

		@SU_SEND({ AB.TC.ZIA58933 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60350_ := 0x02C }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58607", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.3.15 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.3.16 - Verify parameter set command", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "DSCB_HK_RATE" , \
			PIA60352_ := 4 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.17 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.18 - Verify parameter set command", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "DSCB_HK_RATE" , \
			PIA60352_ := 3 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.19 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.20 - Verify DAC SET/REL", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58908 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59050_ := "START_B" , \
			PIA60354_ :=  1024 , \
			PIA60353_ :=  4095 , \
			PIA60345_ :=  1 , \
			PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.21 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.3.22 - Verify DAC SET/REL", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58908 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59050_ := "START_B" , \
			PIA60354_ :=  2048 , \
			PIA60353_ :=  4095 , \
			PIA60345_ :=  1 , \
			PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.23 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.3.24 - Verify DAC SET/REL", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58909 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59050_ := "START_B" , \
			PIA60355_ := 10 , \
			PIA60353_ := 20 , \
			PIA60345_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.25 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.3.26 - Verify DAC SET/REL", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58909 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59050_ := "START_B" , \
			PIA60355_ := -20 , \
			PIA60353_ := 30 , \
			PIA60345_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.27 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.3.28 - Verify AC Link disable", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58928 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59000_ := "DISABLE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.29 - *WAIT*, 0:00:03, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(3)

		@SU_SEQPHASE2(3, "8.3.30 - Verify AC Link enable", *$sNumPha, "",  $sTitle)
		
		@SU_SEND({ AB.TC.ZIA58928 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59000_ := "ENABLE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.31 - *WAIT*, 0:00:05, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(5)

		@SU_SEQPHASE2(3, "8.3.32 - Verify safety limit update (and trip)", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58939 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60763_ := "OP_THERM_1" , \
			PIA60764_ := 4095 , \
			PIA60765_ := 0 , \
			PIA60766_ := 65535 , \
			PIA60767_ := 65535 , \
			PIA60768_ := 65535 , \
			PIA60769_ := 65535 , \
			PIA60770_ := 65535 , \
			PIA60771_ := 65535	 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.33 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.34 - Clear FDIR response", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58918 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59016_ := "FDIR_RESPONSE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.35 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.36 - Verify HIS is in LVENG mode", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "LVENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.37 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.38 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.39 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.40 - Verify nominal safe (slow rampdown)", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58941 , \
			SHF:OBV := 0 , \
			SID:OBV := 120}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.41 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.42 - Clear FDIR response", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58918 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59016_ := "FDIR_RESPONSE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.43 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.44 - Verify HIS is in LVENG mode ", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "LVENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.45 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.46 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.47 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.48 - Verify nominal safe (fast rampdown)", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58940 , \
			SHF:OBV := 0 , \
			SID:OBV := 120}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.49 - *WAIT*, 0:00:57, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(57)

		@SU_SEQPHASE2(3, "8.3.50 - Wait for macro to complete (HK slows)", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58931 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59056_ := "HK_TREP" , \
			PIA60361_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.51 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.3.52 - Verify HIS reset", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58601")

		@SU_SEND({ AB.TC.ZIA58916 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59010_ := "HIS"}, $s_Trace, VER := "SKIP", TIMEOUT_VER := 60) -- v1.23

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58601", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "8.3.53 - *WAIT*, 0:01:30, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(90) -- 1.30

		@SU_SEQPHASE2(3, "8.3.54 - Enable command echoing", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58927 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59000_ := "ENABLE" , \
			PIA60359_ := 43827	 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.3.55 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.3.56 - Command HK at 30 s", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58931 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59056_ := "HK_TREP" , \
			PIA60361_ := 30 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60) -- v1.20

		@SU_SEQPHASE2(3, "8.3.57 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.3.58 - Queue error messages", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "EV_QUEUE_BYPASS" , \
			PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		**********************************************************************************				
		@SU_SEQPHASE2(2, "8.4	HIS Test Case 4 & 5: SW, FPGA Mode & LV DS-TOF STIM Test", *$sNumPha, "",  $sTitle)
		**********************************************************************************	

		@SU_SEQPHASE2(3, "8.4.1 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.2 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.3 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(2)

		@SU_SEQPHASE2(3, "8.4.4 - Configure no HV sweeping (static output only) ", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "SW_EN_ANALYZER" , \
			PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.5 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.6 - Configure no HV sweeping (static output only) ", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "SW_EN_TOP_DFL" , \
			PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.7 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.8 - Configure no HV sweeping (static output only) ", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "SW_EN_BOT_DFL" , \
			PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.9 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.10 - Configure no HV sweeping (static output only) ", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "SW_EN_TOP_PLATE" , \
			PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.11 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.12 - Configure DSCB for Normal Coincidence (TOF Only)", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "DSCB_REG_CTR_ST" , \
			PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.13 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.14 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.15 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.16 - Configure DSCB thresholds for stims test", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58913 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60001_ := 31 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.17 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.18 - Configure DSCB for Multi-SSD", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "MULTI_SSD_ENABLE" , \
			PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.19 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.20 - Enable sensor test packet", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "SENS_TEST_PKT_EN" , \
			PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.21 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.22 - Enable matrix (disabled by default)", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "MATRIX_EN_NORM" , \
			PIA60352_ := 0x7FFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)	

		@SU_SEQPHASE2(3, "8.4.23 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.24 - Enable matrix (disabled by default)", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "MATRIX_EN_BURS_1" , \
			PIA60352_ := 0x7FFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.25 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.26 - Enable matrix (disabled by default)", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "MATRIX_EN_B2" , \
			PIA60352_ := 0x7FFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.27 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.28 - Enable stim pulse table", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "STIM_TABLE_NO" , \
			PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.29 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.30 - Enable stim pulse table", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "STIM_TABLE_B1" , \
			PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.31 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.32 - Enable stim pulse table", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "STIM_TABLE_B2" , \
			PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)	

		@SU_SEQPHASE2(3, "8.4.33 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.34 - Enable stim pulse table", *$sNumPha, "",  $sTitle)

		@SU_SEND({ AB.TC.ZIA58927 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59000_ := "ENABLE" , \
			PIA60359_ := 43831	 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.35 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.36 - Set Low Latency interval to scan time", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "LL_INTERNAL_SEC" , \
			PIA60352_ := 30 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.37 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.38 - Enter Normal mode", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58913 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60001_ := 10 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.39 - *WAIT*, 0:02:02, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(122)

		@SU_SEQPHASE2(3, "8.4.40 - Enter PRE_BURST mode", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58913 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60001_ := 5 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@su_wait(5) -- v1.23

		@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)
		
 		@su_ipvacs("AB.TM.NIA03010",">90","NO", $s_Trace, 130) -- v1.27 increased timeout

		@SU_SEQPHASE2(3, "8.4.41 - *WAIT*, 0:00:33, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(33)

		@SU_SEQPHASE2(3, "8.4.42 - Set Low Latency interval to scan time", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "LL_INTERNAL_SEC" , \
			PIA60352_ := 4 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.43 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.44 - Set burst mode stims", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58919 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60356_ := "NUM_BURST_SECS" , \
			PIA60352_ :=32 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.45 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(1)

		@SU_SEQPHASE2(3, "8.4.46 - Enter Burst mode", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58913 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60001_ := 6 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "8.4.47 - *WAIT*, 0:00:34, From previous command", *$sNumPha, "",  $sTitle)
		@su_wait(34)

		@SU_SEQPHASE2(3, "8.4.48 - Go to HVSTDBY mode ", *$sNumPha, "",  $sTitle)
	
		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		IF ($sHIS_HVSafety = "AIRSAFE")

			**********************************************************************************				
			@SU_SEQPHASE2(2, "9	HIS High Voltage Tests", *$sNumPha, "",  $sTitle)
			**********************************************************************************	

			ta_print "The entire section 9 contains HIS HV tests. Check HV plug state before running HIS HV FFT."

			@SU_SEQPHASE2(3, "9.1.1 - Check for received packets", *$sNumPha, "",  $sTitle)

			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_ipvacs("AB.TM.NIA01206","=","=76", $s_Trace, 10)

			-- ONLY RUN THESE TESTS IF YIA58212 NIAG1206 EQUALS 76
			-- DO NOT RUN THESE TESTS IF YIA58212 NIAG1206 DOES NOT EQUAL 76

			@SU_SEQPHASE2(3, "9.2 - HIS Test Case 6: HV Control Test ", *$sNumPha, "",  $sTitle)

			@SU_SEQPHASE2(3, "9.2.1 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.2.2 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.3 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.2.4 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.5 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.2.6 - Enable PA", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "ENABLE" , \
				PIA59006_ := "PA"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.7 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)
	
			@SU_SEQPHASE2(3, "9.2.8 - Ramp Up PA", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "PA" , \
				PIA60354_ := -1712 , \
				PIA60353_ := 122 , \
				PIA60345_ := 10 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
	
			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_anaacs("AB.TM.NIA01350",">=-3.0","<=-2.0", $sTrace, 10)			-- HIS_PA_HVPS_VOLT_M_MIN
			@su_anaacs("AB.TM.NIA01351",">=-3.0","<=-2.0", $sTrace, 10)			-- HIS_PA_HVPS_VOLT_M_MAX
			@su_anaacs("AB.TM.NIA01352",">=-3.0","<=-2.0", $sTrace, 10)			-- HIS_PA_HVPS_VOLT_M_AVE
			@su_anaacs("AB.TM.NIA01724",">=-0.125","<=-0.017", $sTrace, 10)		-- HIS_LVPS_N12V_CUR_MIN -- v1.20
			@su_anaacs("AB.TM.NIA01725",">=-0.125","<=-0.017", $sTrace, 10)		-- HIS_LVPS_N12V_CUR_MAX -- v1.20
			@su_anaacs("AB.TM.NIA01726",">=-0.125","<=-0.017", $sTrace, 10)		-- HIS_LVPS_N12V_CUR_AVE -- v1.20
			@su_anaacs("AB.TM.NIA01739",">=0.015","<=0.110", $sTrace, 10)			-- HIS_LVPS_P12V_CUR_MIN -- v1.20
			@su_anaacs("AB.TM.NIA01740",">=0.015","<=0.110", $sTrace, 10)			-- HIS_LVPS_P12V_CUR_MAX -- v1.20
			@su_anaacs("AB.TM.NIA01741",">=0.015","<=0.110", $sTrace, 10)			-- HIS_LVPS_P12V_CUR_AVE -- v1.20

			@SU_SEQPHASE2(3, "9.2.9 - *WAIT*, 0:02:40, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(160)

			@SU_SEQPHASE2(3, "9.2.10 - Enable OFFSET", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "ENABLE" , \
				PIA59006_ := "OFFSET"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.11 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.2.12 - Ramp Up OFFSET", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "OFFSET" , \
				PIA60354_ := 205 , \
				PIA60353_ := 102 , \
				PIA60345_ := 5 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_anaacs("AB.TM.NIA04612",">=0.095","<=0.105", $sTrace, 10)			-- HIS_OFFSETVMON_MIN
			@su_anaacs("AB.TM.NIA04634",">=0.095","<=0.105", $sTrace, 10)			-- HIS_OFFSETVMON_MAX
			@su_anaacs("AB.TM.NIA04656",">=0.095","<=0.105", $sTrace, 10)			-- HIS_OFFSETVMON_AVE
			@su_anaacs("AB.TM.NIA04624",">=0.41","<=0.60", $sTrace, 10)			-- HIS_OFFSETIMON_MIN
			@su_anaacs("AB.TM.NIA04626",">=0.41","<=0.60", $sTrace, 10)			-- HIS_OFFSETIMON_MAX
			@su_anaacs("AB.TM.NIA04668",">=0.41","<=0.60", $sTrace, 10)			-- HIS_OFFSETIMON_AVE

			@SU_SEQPHASE2(3, "9.2.13 - *WAIT*, 0:00:16, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(16)

			@SU_SEQPHASE2(3, "9.2.14 - Enable Start MCP", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "ENABLE" , \
				PIA59006_ := "START_MCP"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.15 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)
	
			@SU_SEQPHASE2(3, "9.2.16 - Enable Stop MCP", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "ENABLE" , \
				PIA59006_ := "STOP_MCP"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.17 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.2.18 - Enable SSD", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "ENABLE" , \
				PIA59006_ := "SSD"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.19 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.2.20 - Ramp Up Start MCP", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "START_MCP" , \
				PIA60354_ := 246 , \
				PIA60353_ := 41 , \
				PIA60345_ := 5 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.21 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.2.22 - Ramp Up Stop MCP", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "STOP_MCP" , \
				PIA60354_ := 246 , \
				PIA60353_ := 41 , \
				PIA60345_ := 5 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_anaacs("AB.TM.NIA04609",">=0.285","<=0.315", $sTrace, 10)			-- HIS_STARTMCPVMON_MIN
			@su_anaacs("AB.TM.NIA04631",">=0.285","<=0.315", $sTrace, 10)			-- HIS_STARTMCPVMON_MAX
			@su_anaacs("AB.TM.NIA04653",">=0.285","<=0.315", $sTrace, 10)			-- HIS_STARTMCPVMON_AVE
			@su_anaacs("AB.TM.NIA04613",">=0.8","<=1.5", $sTrace, 10)				-- HIS_STARTMCPIMON_MIN
			@su_anaacs("AB.TM.NIA04635",">=0.8","<=1.5", $sTrace, 10)				-- HIS_STARTMCPIMON_MAX
			@su_anaacs("AB.TM.NIA04657",">=0.8","<=1.5", $sTrace, 10)				-- HIS_STARTMCPIMON_AVE

			@SU_SEQPHASE2(3, "9.2.23 - Verify STOP_MCP voltage and current", *$sNumPha, "",  $sTitle)
			
			@su_anaacs("AB.TM.NIA04610",">=0.285","<=0.315", $sTrace, 10)			-- HIS_STOPMCPVMON_MIN
			@su_anaacs("AB.TM.NIA04632",">=0.285","<=0.315", $sTrace, 10)			-- HIS_STOPMCPVMON_MAX
			@su_anaacs("AB.TM.NIA04654",">=0.285","<=0.315", $sTrace, 10)			-- HIS_STOPMCPVMON_AVE
			@su_anaacs("AB.TM.NIA04614",">=1.2","<=2.0", $sTrace, 10)				-- HIS_STOPMCPIMON_MIN
			@su_anaacs("AB.TM.NIA04636",">=1.2","<=2.0", $sTrace, 10)				-- HIS_STOPMCPIMON_MAX
			@su_anaacs("AB.TM.NIA04658",">=1.2","<=2.0", $sTrace, 10)				-- HIS_STOPMCPIMON_AVE

			@SU_SEQPHASE2(3, "9.2.24 - *WAIT*, 0:00:28, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(28)

			@SU_SEQPHASE2(3, "9.2.25 - Ramp Up SSD", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "SSD" , \
				PIA60354_ := 491 , \
				PIA60353_ := 164 , \
				PIA60345_ := 1 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_anaacs("AB.TM.NIA04611",">=28.5","<=31.5", $sTrace, 10)			-- HIS_SSDVMON_MIN
			@su_anaacs("AB.TM.NIA04633",">=28.5","<=31.5", $sTrace, 10)			-- HIS_SSDVMON_MAX
			@su_anaacs("AB.TM.NIA04655",">=28.5","<=31.5", $sTrace, 10)			-- HIS_SSDVMON_AVE
			@su_anaacs("AB.TM.NIA04623",">=0.54","<=0.90", $sTrace, 10)			-- HIS_SSDIMON_MIN
			@su_anaacs("AB.TM.NIA04645",">=0.54","<=0.90", $sTrace, 10)			-- HIS_SSDIMON_MAX
			@su_anaacs("AB.TM.NIA04667",">=0.54","<=0.90", $sTrace, 10)			-- HIS_SSDIMON_AVE

			@SU_SEQPHASE2(3, "9.2.26 - *WAIT*, 0:00:06, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(6)

			@SU_SEQPHASE2(3, "9.2.27 - Enable EAIS", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "ENABLE" , \
				PIA59006_ := "IRAP"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.28 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.2.29 - Ramp Up MAIN", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "MAIN" , \
				PIA60354_ := 4095 , \
				PIA60353_ := 229 , \
				PIA60345_ := 10 , \
				PIA59054_ := "NONE" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			-- Verify MAIN voltage and current

			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_anaacs("AB.TM.NIA01341",">=0.5643","<=0.6237", $sTrace, 10)			-- HIS_HVPS_MAIN_POS_MIN
			@su_anaacs("AB.TM.NIA01342",">=0.5643","<=0.6237", $sTrace, 10)			-- HIS_HVPS_MAIN_POS_MAX
			@su_anaacs("AB.TM.NIA01343",">=0.5643","<=0.6237", $sTrace, 10)			-- HIS_HVPS_MAIN_POS_AVE
			@su_anaacs("AB.TM.NIA01335",">=-0.6237","<=-0.5643", $sTrace, 10)		-- HIS_HVPS_MAIN_NEG_MIN
			@su_anaacs("AB.TM.NIA01371",">=-0.6237","<=-0.5643", $sTrace, 10)		-- HIS_HVPS_MAIN_NEG_MAX
			@su_anaacs("AB.TM.NIA01407",">=-0.6237","<=-0.5643", $sTrace, 10)		-- HIS_HVPS_MAIN_NEG_AVE
			@su_anaacs("AB.TM.NIA01409",">=0.013","<=0.110", $sTrace, 10)			-- HIS_HVPS_P12V_CUR_MIN -- v1.20
			@su_anaacs("AB.TM.NIA01410",">=0.013","<=0.110", $sTrace, 10)			-- HIS_HVPS_P12V_CUR_MAX -- v1.20
			@su_anaacs("AB.TM.NIA01411",">=0.013","<=0.110", $sTrace, 10)			-- HIS_HVPS_P12V_CUR_AVE -- v1.20
			@su_anaacs("AB.TM.NIA01412",">=-0.110","<=-0.013", $sTrace, 10)			-- HIS_HVPS_N12V_CUR_MIN -- v1.20
			@su_anaacs("AB.TM.NIA01413",">=-0.110","<=-0.013", $sTrace, 10)			-- HIS_HVPS_N12V_CUR_MAX -- v1.20
			@su_anaacs("AB.TM.NIA01414",">=-0.110","<=-0.013", $sTrace, 10)			-- HIS_HVPS_N12V_CUR_AVE -- v1.20

			@SU_SEQPHASE2(3, "9.2.30 - *WAIT*, 0:02:53, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(173)

			@SU_SEQPHASE2(3, "9.2.31 - Ramp Up Analyzer", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "ANALYZER" , \
				PIA60354_ := -295 , \
				PIA60353_ := 258 , \
				PIA60345_ := 10 , \
				PIA59054_ := "HIGH" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_anaacs("AB.TM.NIA01344",">=-0.06","<=-0.03", $sTrace, 10)			-- HIS_HVPS_ANL_MIN
			@su_anaacs("AB.TM.NIA01345",">=-0.06","<=-0.03", $sTrace, 10)			-- HIS_HVPS_ANL_MAX
			@su_anaacs("AB.TM.NIA01346",">=-0.06","<=-0.03", $sTrace, 10)			-- HIS_HVPS_ANL_AVE

			@SU_SEQPHASE2(3, "9.2.32 - *WAIT*, 0:00:13, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(13)
	
			@SU_SEQPHASE2(3, "9.2.33 - Ramp Up Top Deflector", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "TOP_DFL" , \
				PIA60354_ := 280 , \
				PIA60353_ := 258 , \
				PIA60345_ := 10 , \
				PIA59054_ := "HIGH" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_anaacs("AB.TM.NIA01336",">=0.03","<=0.05", $sTrace, 10)			-- HIS_HVPS_TOP_DEF_MIN
			@su_anaacs("AB.TM.NIA01372",">=0.03","<=0.05", $sTrace, 10)			-- HIS_HVPS_TOP_DEF_MAX
			@su_anaacs("AB.TM.NIA01408",">=0.03","<=0.05", $sTrace, 10)			-- HIS_HVPS_TOP_DEF_AVE

			@SU_SEQPHASE2(3, "9.2.34 - *WAIT*, 0:00:14, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(14)

			@SU_SEQPHASE2(3, "9.2.35 - Ramp Up Bottom Deflector", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "BOT_DFL" , \
				PIA60354_ := -280 , \
				PIA60353_ := 258 , \
				PIA60345_ := 10 , \
				PIA59054_ := "HIGH" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_anaacs("AB.TM.NIA01337",">=0.03","<=0.05", $sTrace, 10)			-- HIS_HVPS_BOT_DEF_MIN
			@su_anaacs("AB.TM.NIA01373",">=0.03","<=0.05", $sTrace, 10)			-- HIS_HVPS_BOT_DEF_MAX
			@su_anaacs("AB.TM.NIA01409",">=0.03","<=0.05", $sTrace, 10)			-- HIS_HVPS_BOT_DEF_AVE

			@SU_SEQPHASE2(3, "9.2.36 - *WAIT*, 0:00:13, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(13)

			@SU_SEQPHASE2(3, "9.2.37 - Ramp Up Top Plate", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "TOP_PLATE" , \
				PIA60354_ := 287 , \
				PIA60353_ := 258 , \
				PIA60345_ := 10 , \
				PIA59054_ := "HIGH" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@RPZA_HKTM_CATCH("AB.TM.YIA58212", "WAIT" , *$Count , 200)		
			@su_anaacs("AB.TM.NIA01347",">=0.03","<=0.05", $sTrace, 10)			-- HIS_HVPS_TOP_PLATE_MIN
			@su_anaacs("AB.TM.NIA01348",">=0.03","<=0.05", $sTrace, 10)			-- HIS_HVPS_TOP_PLATE_MAX
			@su_anaacs("AB.TM.NIA01349",">=0.03","<=0.05", $sTrace, 10)			-- HIS_HVPS_TOP_PLATE_AVE

			@SU_SEQPHASE2(3, "9.2.38 - *WAIT*, 0:01:13, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(73)
	
			@SU_SEQPHASE2(3, "9.2.39 - Ramp Down Top Plate", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "TOP_PLATE" , \
				PIA60354_ := 0 , \
				PIA60353_ := 258 , \
				PIA60345_ := 3 , \
				PIA59054_ := "HIGH" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.40 - *WAIT*, 0:00:06, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(6)

			@SU_SEQPHASE2(3, "9.2.41 - Ramp Down Bottom Deflector", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "BOT_DFL" , \
				PIA60354_ := 0 , \
				PIA60353_ := 258 , \
				PIA60345_ := 3 , \
				PIA59054_ := "HIGH" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.42 - *WAIT*, 0:00:06, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(6)

			@SU_SEQPHASE2(3, "9.2.43 - Ramp Down Top Deflector", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "TOP_DFL" , \
				PIA60354_ := 0 , \
				PIA60353_ := 258 , \
				PIA60345_ := 3 , \
				PIA59054_ := "HIGH" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.2.44 - *WAIT*, 0:00:06, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(6)
	
			@SU_SEQPHASE2(3, "9.2.45 - Ramp Down Analyzer", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "ANALYZER" , \
				PIA60354_ := 0 , \
				PIA60353_ := 258 , \
				PIA60345_ := 3 , \
				PIA59054_ := "HIGH" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			**********************************************************************************				
			@SU_SEQPHASE2(2, "9.3	HIS Test Case 7: HV DS-TOF Stim Test", *$sNumPha, "",  $sTitle)
			**********************************************************************************	

			@SU_SEQPHASE2(3, "9.3.1 - *WAIT*, 0:00:06, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(6)

			@SU_SEQPHASE2(3, "9.3.2 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58917 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.3 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.4 - Configure for HV sweeping", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_ANALYZER" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.5 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.6 - Set top deflector", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_DFL" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.7 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.8 - Set bottom deflector", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_BOT_DFL" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.9 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.10 - Set top plate", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_PLATE" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.11 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.12 - Configure DSCB for Normal Coincidence (TOF Only)", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "DSCB_REG_CTR_ST" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.13 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.14 - Configure stim test setup, go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58917 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.15 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.16 - Configure DSCB thresholds for stims test", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58913 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60001_ := 31 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.17 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.18 - Configure DSCB for Multi-SSD", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "MULTI_SSD_ENABLE" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.19 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.20 - Enable sensor test packet", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SENS_TEST_PKT_EN" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.21 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.22 - Enable matrix (disabled by default)", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "MATRIX_EN_NORM" , \
				PIA60352_ := 0x7FFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.23 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.24 - Set burst matrix", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "MATRIX_EN_BURS_1" , \
				PIA60352_ := 0x7FFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.25 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.26 - Set matrix", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "MATRIX_EN_B2" , \
				PIA60352_ := 0x7FFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.27 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.28 - Enable stim pulse table", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "STIM_TABLE_NO" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.29 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.30 - Set stim table", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "STIM_TABLE_B1" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.31 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.32 - Set stim table", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "STIM_TABLE_B2" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.33 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.3.34 - Enable event report", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58927 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "ENABLE" , \
				PIA60359_ := 43831 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.35 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.36 - Set Low Latency interval to scan time", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "LL_INTERNAL_SEC" , \
				PIA60352_ := 30 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.37 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.38 - Run normal mode stims, enter Normal mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58913 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60001_ := 10 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.39 - *WAIT*, 0:02:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(122)

			@SU_SEQPHASE2(3, "9.3.40 - Enter PRE_BURST mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58913 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60001_ := 5 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_IPVacs("AB.TM.NIA03010",">90","NO", $sTrace, 240)    -- HK.his_proc_idle

			@SU_SEQPHASE2(3, "9.3.41 - *WAIT*, 0:00:33, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(33)

			@SU_SEQPHASE2(3, "9.3.42 - Set Low Latency interval to scan time", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "LL_INTERNAL_SEC" , \
				PIA60352_ := 4 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.43 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.44 - Run burst mode stims, enter Burst mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "NUM_BURST_SECS" , \
				PIA60352_ := 32 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.45 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.3.46 - Start macro", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58913 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60001_ := 6 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.3.47 - *WAIT*, 0:00:34, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(34)

			@SU_SEQPHASE2(3, "9.3.48 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58917 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			**********************************************************************************				
			@SU_SEQPHASE2(2, "9.4	HIS Test Case 8: HV SSD Performance Test ", *$sNumPha, "",  $sTitle)
			**********************************************************************************	

			@SU_SEQPHASE2(3, "9.4.1 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.4.2 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58917 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.3 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.4 - Configure no HV sweeping (static ouput only)", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_ANALYZER" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.5 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.6 - Set top deflector", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_DFL" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.7 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.8 - Set bottom deflector", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_BOT_DFL" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.9 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.10 - Set top plate parameter", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_PLATE" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.11 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.12 - Configure DSCB for Energy Only", *$sNumPha, "",  $sTitle)

			@SU_SEQPHASE2(3, "9.4.13", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "DSCB_REG_CTR_ST" , \
				PIA60352_ := 2 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.14 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.15 - Configure stim test setup. Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58917 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.16 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.17 - Configure DSCB thresholds for stims test", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58913 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60001_ := 31 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.18 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.19 - Configure DSCB for Multi-SSD", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "MULTI_SSD_ENABLE" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.20 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.21 - Enable sensor test packet", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SENS_TEST_PKT_EN" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.22 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.23 - Enable matrix (disabled by default)", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "MATRIX_EN_NORM" , \
				PIA60352_ := 0x7FFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
	
			@SU_SEQPHASE2(3, "9.4.24 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.25 - Set matrix", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "MATRIX_EN_BURS_1" , \
				PIA60352_ := 0x7FFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.26 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.27 - Set matrix", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "MATRIX_EN_B2" , \
				PIA60352_ := 0x7FFFFFFF }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.28 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.29 - Set stim pulse table", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "STIM_TABLE_NO" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.30 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.31 - Set stim table", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "STIM_TABLE_B1" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.32 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.33 - Set stim table", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "STIM_TABLE_B2" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.34 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.35 - Enable event report", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58927 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "ENABLE" , \
				PIA60359_ := 43831 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.36 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.37 - Set Low Latency interval to scan time", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "LL_INTERNAL_SEC" , \
				PIA60352_ := 30 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.38 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.39 - Run normal mode macro", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58913 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60001_ := 10 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.40 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.4.41 - Run PRE_BURST mode macro", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58913 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60001_ := 5 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_IPVacs("AB.TM.NIA03010",">90","NO", $sTrace, 240)    -- HK.his_proc_idle

			@SU_SEQPHASE2(3, "9.4.42 - *WAIT*, 0:00:34, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(34)

			@SU_SEQPHASE2(3, "9.4.43 - Set Low Latency interval to scan time", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "LL_INTERNAL_SEC" , \
				PIA60352_ := 4 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.44 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.45 - Enter Burst mode", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "NUM_BURST_SECS" , \
				PIA60352_ := 32 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.46 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.4.47 - Run  mode macro", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58913 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60001_ := 6 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.4.48 - *WAIT*, 0:00:34, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(34)

			@SU_SEQPHASE2(3, "9.4.49 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58917 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			**********************************************************************************				
			@SU_SEQPHASE2(2, "9.5	HIS Test Case 9: HV PS System PerformanceTest", *$sNumPha, "",  $sTitle)
			**********************************************************************************	

			@SU_SEQPHASE2(3, "9.5.1 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.5.2 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58917 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.3 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.4 - Configure for HV sweeping", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_ANALYZER" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.5 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.6 - Enable top deflector", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_DFL" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.7 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.8 - Enable bottom deflector", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_BOT_DFL" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.9 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.10 - Enable top plate", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_PLATE" , \
				PIA60352_ := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.11 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.12 - Enter Low Cadence mode ", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58913 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60001_ := 3 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.13 - *WAIT*, 0:06:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(361)

			@SU_SEQPHASE2(3, "9.5.14 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58917 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@RPZA_HKTM_CATCH("AB.TM.YIA58998", "WAIT" , *$Count , 200)		
--			@su_anaacs("AB.TM.NIA00834","NO","<=600.0", $sTrace, 10)			-- PCDM_HK_IMON_HIS -- v1.20

			@SU_SEQPHASE2(3, "9.5.15 - Verify static HV standard deviation", *$sNumPha, "",  $sTitle)

--			@su_anaacs("AB.TM.NIA05130","NO","<=2000.0", $sTrace, 10)			-- HK_I_P28V_PRI -- v1.20

			@SU_SEQPHASE2(3, "9.5.16 - *WAIT*, 0:00:05, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(5)

			@SU_SEQPHASE2(3, "9.5.17 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58917 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.18 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.19 - Ramp Down Top Plate", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "TOP_PLATE" , \
				PIA60354_ :=  0 , \
				PIA60353_ :=  258 , \
				PIA60345_ :=  3 , \
				PIA59054_ := "HIGH"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.20 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.21 - Ramp Down Bottom Deflector", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "BOT_DFL" , \
				PIA60354_ :=  0 , \
				PIA60353_ :=  258 , \
				PIA60345_ :=  3 , \
				PIA59054_ := "HIGH"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.22 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.23 - Ramp Down Top Deflector", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "TOP_DFL" , \
				PIA60354_ :=  0 , \
				PIA60353_ :=  258 , \
				PIA60345_ :=  3 , \
				PIA59054_ := "HIGH"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.24 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.25 - Ramp Down Analyzer", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "ANALYZER" , \
				PIA60354_ :=  0 , \
				PIA60353_ :=  258 , \
				PIA60345_ :=  3 , \
				PIA59054_ := "HIGH"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.26 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.27 - Ramp Down MAIN", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "MAIN" , \
				PIA60354_ :=  0 , \
				PIA60353_ :=  229 , \
				PIA60345_ :=  3 , \
				PIA59054_ := "HIGH"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.28 - *WAIT*, 0:00:55, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(55)

			@SU_SEQPHASE2(3, "9.5.29 - Disable EAIS", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "DISABLE" , \
				PIA59006_ := "IRAP"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.30 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.5.31 - Ramp Down Start MCP", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "START_MCP" , \
				PIA60354_ := 0 , \
				PIA60353_ := 41 , \
				PIA60345_ := 5 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.32 - *WAIT*, 0:00:01, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(1)

			@SU_SEQPHASE2(3, "9.5.33 - Ramp Down Stop MCP", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "STOP_MCP" , \
				PIA60354_ := 0 , \
				PIA60353_ := 41 , \
				PIA60345_ := 5 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.34 - *WAIT*, 0:00:28, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(28)

			@SU_SEQPHASE2(3, "9.5.35 - Disable Start MCP", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "DISABLE" , \
				PIA59006_ := "START_MCP"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.36 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.5.37 - Disable Stop MCP", *$sNumPha, "",  $sTitle)
			
			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "DISABLE" , \
				PIA59006_ := "STOP_MCP"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.38 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.5.39 - Ramp Down OFFSET", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "OFFSET" , \
				PIA60354_ := 0 , \
				PIA60353_ := 102 , \
				PIA60345_ := 5 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.40 - *WAIT*, 0:00:13, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(13)

			@SU_SEQPHASE2(3, "9.5.41 - Disable OFFSET", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "DISABLE" , \
				PIA59006_ := "OFFSET"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.42 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.5.43 - Ramp Down SSD", *$sNumPha, "",  $sTitle)

			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "SSD" , \
				PIA60354_ := 0 , \
				PIA60353_ := 164 , \
				PIA60345_ := 1 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.44 - *WAIT*, 0:00:06, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(6)

			@SU_SEQPHASE2(3, "9.5.45 - Disable SSD", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "DISABLE" , \
				PIA59006_ := "SSD"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.46 - *WAIT*, 0:00:02, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(2)

			@SU_SEQPHASE2(3, "9.5.47 - Ramp Down PA", *$sNumPha, "",  $sTitle)
	
			@SU_SEND({ AB.TC.ZIA58908 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59050_ := "PA" , \
				PIA60354_ := 0 , \
				PIA60353_ := 122 , \
				PIA60345_ := 10 , \
				PIA59054_ := "NONE"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.48 - *WAIT*, 0:02:23, From previous command", *$sNumPha, "",  $sTitle)
			@su_wait(143)

			@SU_SEQPHASE2(3, "9.5.49 - Disable PA", *$sNumPha, "",  $sTitle)
 	
			@SU_SEND({ AB.TC.ZIA58907 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA59000_ := "DISABLE" , \
				PIA59006_ := "PA"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

			@SU_SEQPHASE2(3, "9.5.50 - Command HK at 90s (normal default)", *$sNumPha, "",  $sTitle)
 	
		@SU_SEND({ AB.TC.ZIA58931 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59056_ := "HK_TREP" , \
			PIA60361_ := 3090}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)	-- v1.20

		end if -- 		IF ($sPAS_HVSafety = "AIRSAFE")
			
		**********************************************************************************				
		@SU_SEQPHASE2(2, "10 - PAS Test", *$sNumPha, "",  $sTitle)
		**********************************************************************************	
	
		@SU_SEQPHASE2(2, "10.1.1 - Start Science Cyclogram", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58700")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58705")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58982")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58992")
		$i_reportflowID_4 := startreportflow("AB.TM.YIA58993")
		$i_reportflowID_5 := startreportflow("AB.TM.YIA58729")

		@SU_SEND({ AB.TC.ZIA58943 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60777_ := "PasNc1" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58700", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58705", *$i_RptRefNb_1) 
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58982", *$i_RptRefNb_1, 360) -- v1.23
		stopreportflow $i_reportflowID_2 -- v1.23

		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58992", *$i_RptRefNb_1, 360) 
		stopreportflow $i_reportflowID_3 -- v1.23

		@RPZA_CATCHTMPCKT($i_reportFlowID_4, "AB.TM.YIA58993", *$i_RptRefNb_1, 360) 
		stopreportflow $i_reportflowID_4 -- v1.23

		@RPZA_CATCHTMPCKT($i_reportFlowID_5, "AB.TM.YIA58729", *$i_RptRefNb_1) 
		stopreportflow $i_reportflowID_5 -- v1.23

		@SU_SEQPHASE2(3, "10.1.2 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)
							
		@SU_SEQPHASE2(2, "10.1.3 - Upload the PAS pulse table #1", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x28 , \
			PIA60672_ := 0x4 , \
			PIA60717_ := 0x0 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.4 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "10.1.5 - Upload the PAS pulse table #2", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x28 , \
			PIA60672_ := 0x4 , \
			PIA60717_ := 0x1 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.6 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "10.1.7 - Upload the PAS pulse table #3", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x28 , \
			PIA60672_ := 0x4 , \
			PIA60717_ := 0x2 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.8 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "10.1.9 - Upload the PAS pulse table #4", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x28 , \
			PIA60672_ := 0x4 , \
			PIA60717_ := 0x3 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.10 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)
		
		@SU_SEQPHASE2(2, "10.1.11 - Upload the PAS pulse table #5", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x28 , \
			PIA60672_ := 0x4 , \
			PIA60717_ := 0x4 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.12 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)
		
		@SU_SEQPHASE2(2, "10.1.13 - Upload the PAS pulse table #6", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x1E , \
			PIA60672_ := 0x6 , \
			PIA60717_ := 0x5 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.14 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)
		
		@SU_SEQPHASE2(2, "10.1.15 - Upload the PAS pulse table #7", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x1E , \
			PIA60672_ := 0x6 , \
			PIA60717_ := 0x6 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.16 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "10.1.17 - Upload the PAS pulse table #8", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x1E , \
			PIA60672_ := 0x6 , \
			PIA60717_ := 0x7 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.18 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "10.1.19 - Upload the PAS pulse table #9", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x1E , \
			PIA60672_ := 0x6 , \
			PIA60717_ := 0x8 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.20 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "10.1.21 - Upload the PAS pulse table #10", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x1E , \
			PIA60672_ := 0x6 , \
			PIA60717_ := 0x9 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.22 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "10.1.23 - Upload the PAS pulse table #11", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x1E , \
			PIA60672_ := 0x6 , \
			PIA60717_ := 0x5 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.24 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "10.1.25 - Upload the PAS pulse table #5", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58878 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60719_ := 0x0F1A6E , \
			FI1_:OBV := 0 , \
			FI2_:OBV := 0 , \
			PIA60433_ := 0x28 , \
			PIA60672_ := 0x4 , \
			PIA60717_ := 0x4 , \
			PIA60718_ := 0x14}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "10.1.26 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "10.1.27 - Put PAS into no science mode ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58944 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		
	
		***********************************************************************
		@SU_SEQPHASE2(1, "11 EAS1 TEST", *$sNumPha, "",  $sTitle)
		***********************************************************************

		@SU_SEQPHASE2(2, "11.1 - Macros Test", *$sNumPha, "",  $sTitle)

		@SU_SEQPHASE2(3, "11.1.1 - Set the master control register for manual heater on EAS1", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58776 , \
			PIA60423_ := 0 , \
			PIA60424_ := 0x40 , \
			PIA60425_ := 0x60 }, $sTrace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
	  	@SU_SEQPHASE2(3, "11.1.2 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		if ($sPlatform = "FM")
		   	@SU_SEQPHASE2(3, "11.1.3 - Turn the manual heater on for EAS1 FM", *$sNumPha, "",  $sTitle)	
			@SU_SEND({ AB.TC.ZIA58757 , \
				PIA60773_ := 0 , \
				PIA60774_ := 0x01 , \
				PIA60775_ := 0x60 }, $sTrace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		 

		else --  ($sPlatform = 'ETB')
		   	@SU_SEQPHASE2(3, "11.1.3 - Turn the manual heater on for EAS1 EM", *$sNumPha, "",  $sTitle)	
			@SU_SEND({ AB.TC.ZIA58757 , \
				PIA60773_ := 0 , \
				PIA60774_ := 0x00 , \
				PIA60775_ := 0xC0 }, $sTrace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		 
		endif	

	  	@SU_SEQPHASE2(3, "11.1.4 - Wait 00:02:30 (150 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(150)
			
		@SU_SEQPHASE2(3, "11.1.5 - Check the EAS1 current in the DPU HK and the EAS1 temp in the EAS1 HK", *$sNumPha, "",  $sTitle)	
		@RPZA_HKTM_CATCH("AB.TM.YIA58200", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00833",">=60","<=300", $sTrace, 5)
				
		@RPZA_HKTM_CATCH("AB.TM.YIA58201", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00907",">=280","<=330", $sTrace, 5)
			
		@SU_SEQPHASE2(3, "11.1.6 - Turn the manual heater OFF for EAS1", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58757 , \
			PIA60773_ := 0 , \
			PIA60774_ := 0x0 , \
			PIA60775_ := 0x0 }, $sTrace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

	  	@SU_SEQPHASE2(3, "11.1.7 - Wait 00:05:00 (300 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(300)

		@SU_SEQPHASE2(3, "11.1.8 - Check the EAS1 current in the DPU HK and the EAS1 temp in the EAS1 HK", *$sNumPha, "",  $sTitle)	
		@RPZA_HKTM_CATCH("AB.TM.YIA58200", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00833",">=60","<=300", $sTrace, 5)
				
		@RPZA_HKTM_CATCH("AB.TM.YIA58201", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00907",">=280","<=330", $sTrace, 5)

		@SU_SEQPHASE2(3, "11.1.9 - Start normal mode on EAS1 ", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58727")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58703")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58704")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58713")

		@SU_SEND({ AB.TC.ZIA58771 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0xC2}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58727", *$i_RptRefNb,120) 
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58703", *$i_RptRefNb_1,120) -- every 100s
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58704", *$i_RptRefNb_2,120) -- every 100s 
		stopreportflow $i_reportflowID_2

		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58713", *$i_RptRefNb_3,120) -- every 100s 
		stopreportflow $i_reportflowID_3
							
		@SU_SEQPHASE2(3, "11.1.10 - *WAIT*, 0:02:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(120)

		@SU_SEQPHASE2(3, "11.1.11 - Switch to no science mode on EAS1", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58771 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.1.12 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "11.1.13 - Switch to Eng mode 2 on EAS1", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58940") -- V1.28 typo
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58942")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58944")

		@SU_SEND({ AB.TC.ZIA58788 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60165_ := 10}, $s_Trace, VER := "ACK", TIMEOUT_VER := 300)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58940", *$i_RptRefNb,120) -- V1.28 typo
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58942", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58944", *$i_RptRefNb_2,120)
		stopreportflow $i_reportflowID_2
			
		@SU_SEQPHASE2(3, "11.1.14 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "11.1.15 - Run post-eng mode macro on EAS1 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58934 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60739_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.1.16 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "11.1.17 - Switch to Sweeping Eng mode 3 on EAS1", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58927")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58921")

		@SU_SEND({ AB.TC.ZIA58789 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60101_ := 0 , \
			FI2_:OBV := 0 , \
			PIA60100_ := 0xFF , \
			FI3_:OBV := 0 , \
			PIA60102_ := 0xF , \
			PIA60437_ := 0xA , \
			PIA60444_ := 1 , \
			PIA60165_ := 2 , \
			FI4_:OBV := 0 , \
			PIA60760_ := 0x20 , \
			PIA60761_ := 0x8 , \
			PIA60762_ := "SWEEP_MACRO"}, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58927", *$i_RptRefNb,120) 
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58921", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@SU_SEQPHASE2(3, "11.1.18 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "11.1.19 - Switch to Nominal Eng mode 3 on EAS1", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58925") -- v1.27
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58921")

		@SU_SEND({ AB.TC.ZIA58789 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60101_ := 0 , \
			FI2_:OBV := 0 , \
			PIA60100_ := 0xFF , \
			FI3_:OBV := 0 , \
			PIA60102_ := 0xF , \
			PIA60437_ := 0xA , \
			PIA60444_ := 1 , \
			PIA60165_ := 2 , \
			FI4_:OBV := 0 , \
			PIA60760_ := 0x20 , \
			PIA60761_ := 0x8 , \
			PIA60762_ := "FIXED_MACRO"}, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58925", *$i_RptRefNb,120) 
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58921", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@SU_SEQPHASE2(3, "11.1.20 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "11.1.21 - Run post-eng mode macro on EAS1", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58934 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60739_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.1.22 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "11.1.23 - Switch to Eng mode 4 on EAS1", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58925") -- v1.27
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58921")

		@SU_SEND({ AB.TC.ZIA58790 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60104_ := 0x724 , \
			FI2_:OBV := 0 , \
			PIA60103_ := 0x477 , \
			FI3_:OBV := 0 , \
			PIA60105_ := 0x200 , \
			PIA60106_ := 0x0 , \
			PIA60165_ := 0xA , \
			PIA60851_ := 2 , \
			FI4_:OBV := 0 , \
			PIA60760_:OBV := 0x20 , \
			PIA60761_:OBV := 0x8 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58925", *$i_RptRefNb,120) -- V1.28
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58921", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@SU_SEQPHASE2(3, "11.1.24 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "11.1.25 - Run post-eng mode macro on EAS1", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58934 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60739_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.1.26 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "11.1.27 - Switch to Eng mode 5 on EAS1", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58940") -- v1.27
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58942")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58944")

		@SU_SEND({ AB.TC.ZIA58791 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60454_ := 0xFF , \
			FI2_:OBV := 0 , \
			PIA60455_ := 0xFF , \
			FI3_:OBV := 0 , \
			PIA60040_ := 0x724 , \
			FI4_:OBV := 0 , \
			PIA60039_ := 0x477 , \
			FI5_:OBV := 0 , \
			PIA60041_ := 0x76 , \
			FI6_:OBV := 0 , \
			PIA60106_ := 0x0 , \
			PIA60171_ := 0xA , \
			PIA60165_ := 2 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58940", *$i_RptRefNb,120) -- v1.27
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58942", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58944", *$i_RptRefNb_2,120)
		stopreportflow $i_reportflowID_2
							
		@SU_SEQPHASE2(3, "11.1.28 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "11.1.29 - Run post-eng mode macro on EAS1", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58934 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60739_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.1.30 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "11.1.31 - Switch to Eng mode 6 on EAS1", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58940") -- v1.27
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58942")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58944")

		@SU_SEND({ AB.TC.ZIA58792 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60457_ := 0xFF , \
			FI2_:OBV := 0 , \
			PIA60458_ := 0x32 , \
			FI3_:OBV := 0 , \
			PIA60459_ := 0x29 , \
			FI4_:OBV := 0 , \
			PIA60106_ := 0x0 , \
			PIA60171_ := 0xA , \
			PIA60165_ := 2 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58940", *$i_RptRefNb,120) -- v1.27 
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58942", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1
		
		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58944", *$i_RptRefNb_2,120)
		stopreportflow $i_reportflowID_2

		@SU_SEQPHASE2(3, "11.1.32 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)
							
		@SU_SEQPHASE2(3, "11.1.33 - Run post-eng mode macro on EAS1", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58934 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60739_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
							
		@SU_SEQPHASE2(3, "11.1.34 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "11.1.35 - WE ARE NOT RUNNING ENG MODE 7", *$sNumPha, "",  $sTitle)

		@SU_SEQPHASE2(3, "11.1.36 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

 		@SU_SEQPHASE2(3, "11.1.37 - Switch to Eng mode 8 on EAS1", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58940") -- v1.27
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58942")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58944")

		@SU_SEND({ AB.TC.ZIA58794 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60735_ := 0xFF , \
			FI2_:OBV := 0 , \
			PIA60716_ := 0x32 , \
			PIA60165_ := 0x10 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58940", *$i_RptRefNb,120) -- v1.27
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58942", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58944", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_2

		@SU_SEQPHASE2(3, "11.1.38 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "11.1.39 - Run post-eng mode macro on EAS1 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58934 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60739_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.1.40 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

 		@SU_SEQPHASE2(3, "11.1.41 - Switch to Eng mode 9 on EAS1", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58940") -- v1.27
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58942")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58944")

		@SU_SEND({ AB.TC.ZIA58795 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60165_ := 0x10 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 70) -- v1.23 -- v1.27 ACK only
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58940", *$i_RptRefNb,120) -- v1.27
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58942", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58944", *$i_RptRefNb_2,120)
		stopreportflow $i_reportflowID_2

		@SU_SEQPHASE2(3, "11.1.42 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "11.1.43	- Run post-eng mode macro on EAS1 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58934 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60739_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.1.44 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "11.1.45	- Power down EAS1", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58761 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_HKTM_CATCH("AB.TM.YIA58200", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00833",">=0","<=10", $sTrace, 5)

		@SU_SEQPHASE2(3, "11.1.46 - *WAIT*, 0:02:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(120)

		**********************************************************************************					
		@SU_SEQPHASE2(2, "11.2 Test EAS1 Low Level Commands", *$sNumPha, "",  $sTitle)
		***********************************************************************************

		@SU_SEQPHASE2(3, "11.2.1 - Power up EAS1 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58755 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_HKTM_CATCH("AB.TM.YIA58200", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00833",">=60","<=150", $sTrace, 5)

		@SU_SEQPHASE2(3, "11.2.2 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "11.2.3- Clear EAS1 shared RAM ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58763 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.2.4 - Wait 30 seconds, Request EAS1 HK packet", *$sNumPha, "",  $sTitle)

		@su_wait(30)

		@SU_SEND({ AB.TC.ZIA58782 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
	
		@RPZA_HKTM_CATCH("AB.TM.YIA58201", "WAIT" , *$Count , 20)
		@su_anaacs("AB.TM.NIA00903",">=2.5","<=4.0", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA00905",">=1.0","<=2.0", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA00907",">=280","<=310", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA00909",">=20","<=40", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA00910",">=0","<=1", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA00911",">=0","<=1", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA00912",">=2","<=10", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA00914",">=25","<=30", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA00915",">=280","<=310", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA00916",">=280","<=310", $s_Trace, 10) 

		@SU_SEQPHASE2(3, "11.2.5 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)

		@SU_SEQPHASE2(3, "11.2.6 - Set EAS1 master control register ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58776 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60423_ := 0x00 , \
			PIA60424_ := 0x00 , \
			PIA60425_ := 0x60 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.2.7 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)

		@SU_SEQPHASE2(3, "11.2.8	- Turn EAS1 preamp1 on", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58777 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58066_ := "ON" , \
			PIA58067_ := "OFF"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.2.9 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "11.2.10	- Turn EAS1 preamp2 on ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58777 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58066_ := "ON" , \
			PIA58067_ := "ON"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.2.11 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "11.2.12 - Upload sequence to EAS1 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58772 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "11.2.13 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "11.2.14 - Set EAS1 deflector ratios", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58765 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60474_ := 0x80 , \
			PIA60475_ := 0x00 , \
			PIA60578_ := 0x00 , \
			PIA60589_ := 0x00 , \
			PIA60600_ := 0x00 , \
			PIA60611_ := 0x00 , \
			PIA60622_ := 0x80 , \
			PIA60633_ := 0x00 , \
			PIA60644_ := 0x00 , \
			PIA60655_ := 0x00 , \
			PIA60476_ := 0x00 , \
			PIA60487_ := 0x00 , \
			PIA60498_ := 0x70 , \
			PIA60509_ := 0x00 , \
			PIA60520_ := 0x00 , \
			PIA60531_ := 0x00 , \
			PIA60542_ := 0x00 , \
			PIA60553_ := 0x00 , \
			PIA60564_ := 0x60 , \
			PIA60575_ := 0x00 , \
			PIA60579_ := 0x00 , \
			PIA60580_ := 0x00 , \
			PIA60581_ := 0x00 , \
			PIA60582_ := 0x00 , \
			PIA60583_ := 0x50 , \
			PIA60584_ := 0x00 , \
			PIA60585_ := 0x00 , \
			PIA60586_ := 0x00 , \
			PIA60587_ := 0x00 , \
			PIA60588_ := 0x00 , \
			PIA60590_ := 0x40 , \
			PIA60591_ := 0x00 , \
			PIA60592_ := 0x00 , \
			PIA60593_ := 0x00 , \
			PIA60594_ := 0x00 , \
			PIA60595_ := 0x00 , \
			PIA60596_ := 0x30 , \
			PIA60597_ := 0x00 , \
			PIA60598_ := 0x00 , \
			PIA60599_ := 0x00 , \
			PIA60601_ := 0x00 , \
			PIA60602_ := 0x00 , \
			PIA60603_ := 0x20 , \
			PIA60604_ := 0x00 , \
			PIA60605_ := 0x00 , \
			PIA60606_ := 0x00 , \
			PIA60607_ := 0x00 , \
			PIA60608_ := 0x00 , \
			PIA60609_ := 0x00 , \
			PIA60610_ := 0x00 , \
			PIA60612_ := 0x00 , \
			PIA60613_ := 0x20 , \
			PIA60614_ := 0x00 , \
			PIA60615_ := 0x00 , \
			PIA60616_ := 0x00 , \
			PIA60617_ := 0x00 , \
			PIA60618_ := 0x00 , \
			PIA60619_ := 0x30 , \
			PIA60620_ := 0x00 , \
			PIA60621_ := 0x00 , \
			PIA60623_ := 0x00 , \
			PIA60624_ := 0x00 , \
			PIA60625_ := 0x00 , \
			PIA60626_ := 0x40 , \
			PIA60627_ := 0x00 , \
			PIA60628_ := 0x00 , \
			PIA60629_ := 0x00 , \
			PIA60630_ := 0x00 , \
			PIA60631_ := 0x00 , \
			PIA60632_ := 0x50 , \
			PIA60634_ := 0x00 , \
			PIA60635_ := 0x00 , \
			PIA60636_ := 0x00 , \
			PIA60637_ := 0x00 , \
			PIA60638_ := 0x00 , \
			PIA60639_ := 0x60 , \
			PIA60640_ := 0x00 , \
			PIA60641_ := 0x00 , \
			PIA60642_ := 0x00 , \
			PIA60643_ := 0x00 , \
			PIA60645_ := 0x00 , \
			PIA60646_ := 0x70 , \
			PIA60647_ := 0x00 , \
			PIA60648_ := 0x00 , \
			PIA60649_ := 0x00 , \
			PIA60650_ := 0x00 , \
			PIA60651_ := 0x00 , \
			PIA60652_ := 0x80 , \
			PIA60653_ := 0x00 , \
			PIA60654_ := 0x00 , \
			PIA60656_ := 0x00 , \
			PIA60657_ := 0x00 , \
			PIA60658_ := 0x00 , \
			PIA60659_ := 0x80 , \
			PIA60660_ := 0x00 , \
			PIA60661_ := 0x00 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.2.15 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "11.2.16 - Set EAS1 hemisphere voltage max ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58767 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60441_:OBV := 0x02 , \
			PIA60442_:OBV := 0x9C , \
			PIA60443_:OBV := 0x80}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
					
		@SU_SEQPHASE2(3, "11.2.17 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "11.2.18 - Set EAS1 hemisphere voltage ratio", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58766 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60469_ := 0xDE , \
			PIA60470_ := 0xB8 , \
			PIA60471_ := 0x51}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "11.2.19 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "11.2.20 - Load the EAS1 VGF ratio ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58768 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60460_ := 0 , \
			PIA60461_ := 0 , \
			PIA60462_ := 0 , \
			PIA60463_ := 0 , \
			PIA60464_ := 0 , \
			PIA60465_ := 0 , \
			PIA60466_ := 0 , \
			PIA60467_ := 0 , \
			PIA60468_ := 0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "11.2.21 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "11.2.22 - Load the EAS1 VGF pointer ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58770 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59035_ := 0.000000}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		
		
		@SU_SEQPHASE2(3, "11.2.23 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "11.2.24 - Start the EAS1 sequence ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58773 , \
			SHF:OBV := 0 , \
			SID:OBV := 120}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "11.2.25 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "11.2.26 - Load the EAS1 MCP max voltage ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58783 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60169_ := 0x800 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.2.27 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "11.2.28 - Load the EAS1 MCP ramp voltage  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58784 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60218_ := 0x0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "11.2.29 - *WAIT*, 0:00:40 (40 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(40)

		@SU_SEQPHASE2(3, "11.2.30 - Wait 40 seconds for MCP ramp and HK update and Check the MCP voltage in the EAS1 HK", *$sNumPha, "",  $sTitle)	
		@RPZA_HKTM_CATCH("AB.TM.YIA58201", "WAIT" , *$Count , 40)
		@su_anaacs("AB.TM.NIA00910",">=0","<=15", $s_Trace, 10)				

		@SU_SEQPHASE2(3, "11.2.31 - Load the EAS1 grid voltage and Check the Grid voltage in the EAS1 HK", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58781 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60423_ := 0x00 , \
			PIA60424_ := 0x08 , \
			PIA60425_ := 0x00}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_HKTM_CATCH("AB.TM.YIA58201", "WAIT" , *$Count , 40)
		@su_anaacs("AB.TM.NIA00911",">=-10","<=0", $s_Trace, 10)
							
		@SU_SEQPHASE2(3, "11.2.32 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "11.2.33 - Load the EAS1 Voltage offsets    ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58769 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60411_ := 0x00 , \
			PIA60412_ := 0x00 , \
			PIA60415_ := 0x00 , \
			PIA60416_ := 0x00 , \
			PIA60417_ := 0x00 , \
			PIA60418_ := 0x00 , \
			PIA60419_ := 0x00 , \
			PIA60420_ := 0x00 , \
			PIA60421_ := 0x00 , \
			PIA60422_ := 0x00 , \
			PIA60413_ := 0x00 , \
			PIA60414_ := 0x00}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
							
		@SU_SEQPHASE2(3, "11.2.34 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "11.2.35 -  Load the EAS1 Dither value  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58754 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60736_:OBV := 0x00 , \
			PIA60737_:OBV := 0x00 , \
			PIA60738_:OBV := 0x00}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
					
		@SU_SEQPHASE2(3, "11.2.36 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "11.2.37 -  Load the EAS1 stim values on preamp1  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58774 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60013_ := "PRE-AMP1" , \
			FI1_:OBV := 0 , \
			PIA60429_ := 0x00 , \
			PIA60430_ := 0x0F , \
			PIA60431_ := 0xF0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		
			
		@SU_SEQPHASE2(3, "11.2.38 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "11.2.39 -  Load the EAS1 stim values on preamp2   ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58774 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60013_ := "PRE-AMP2" , \
			FI1_:OBV := 0 , \
			PIA60429_ := 0x00 , \
			PIA60430_ := 0x0F , \
			PIA60431_ := 0xF0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)									
							
		@SU_SEQPHASE2(3, "11.2.40 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "11.2.41 -  Load the EAS1 threshold values    ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58797 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60174_ := 0x5F40 , \
			PIA60185_ := 0x5F41 , \
			PIA60196_ := 0x5F42 , \
			PIA60200_ := 0x5F43 , \
			PIA60201_ := 0x5F44 , \
			PIA60202_ := 0x5F45 , \
			PIA60203_ := 0x6586 , \
			PIA60204_ := 0x6587 , \
			PIA60205_ := 0x66C8 , \
			PIA60175_ := 0x5F49 , \
			PIA60176_ := 0x5F4A , \
			PIA60177_ := 0x5F4B , \
			PIA60178_ := 0x5F4C , \
			PIA60179_ := 0x5F4D , \
			PIA60180_ := 0x5F4E , \
			PIA60181_ := 0x5F4F , \
			PIA60182_ := 0x5F40 , \
			PIA60183_ := 0x5F41 , \
			PIA60184_ := 0x5F42 , \
			PIA60186_ := 0x5F43 , \
			PIA60187_ := 0x5F44 , \
			PIA60188_ := 0x5F45 , \
			PIA60189_ := 0x5F46 , \
			PIA60190_ := 0x5F47 , \
			PIA60191_ := 0x5F48 , \
			PIA60192_ := 0x5F49 , \
			PIA60193_ := 0x5F4A , \
			PIA60194_ := 0x5CCB , \
			PIA60195_ := 0x5F4C , \
			PIA60197_ := 0x5F4D , \
			PIA60198_ := 0x5F4E , \
			PIA60199_ := 0x5F4F}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)	
							
		@SU_SEQPHASE2(3, "11.2.42 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "11.2.43 -  Upload a LUT to the EAS1 energy table   ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58764 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60474_ := 0x0 , \
			PIA60475_ := 0x0 , \
			PIA60578_ := 0x0 , \
			PIA60589_ := 0x0 , \
			PIA60600_ := 0x0 , \
			PIA60611_ := 0x0 , \
			PIA60622_ := 0x0 , \
			PIA60633_ := 0x0 , \
			PIA60644_ := 0x0 , \
			PIA60655_ := 0x0 , \
			PIA60476_ := 0x0 , \
			PIA60487_ := 0x0 , \
			PIA60498_ := 0x0 , \
			PIA60509_ := 0x0 , \
			PIA60520_ := 0x0 , \
			PIA60531_ := 0x0 , \
			PIA60542_ := 0x0 , \
			PIA60553_ := 0x0 , \
			PIA60564_ := 0x0 , \
			PIA60575_ := 0x0 , \
			PIA60579_ := 0x0 , \
			PIA60580_ := 0x0 , \
			PIA60581_ := 0x0 , \
			PIA60582_ := 0x0 , \
			PIA60583_ := 0x0 , \
			PIA60584_ := 0x0 , \
			PIA60585_ := 0x0 , \
			PIA60586_ := 0x0 , \
			PIA60587_ := 0x0 , \
			PIA60588_ := 0x0 , \
			PIA60590_ := 0x0 , \
			PIA60591_ := 0x0 , \
			PIA60592_ := 0x0 , \
			PIA60593_ := 0x0 , \
			PIA60594_ := 0x0 , \
			PIA60595_ := 0x0 , \
			PIA60596_ := 0x0 , \
			PIA60597_ := 0x0 , \
			PIA60598_ := 0x0 , \
			PIA60599_ := 0x0 , \
			PIA60601_ := 0x0 , \
			PIA60602_ := 0x0 , \
			PIA60603_ := 0x0 , \
			PIA60604_ := 0x0 , \
			PIA60605_ := 0x0 , \
			PIA60606_ := 0x0 , \
			PIA60607_ := 0x0 , \
			PIA60608_ := 0x0 , \
			PIA60609_ := 0x0 , \
			PIA60610_ := 0x0 , \
			PIA60612_ := 0x0 , \
			PIA60613_ := 0x0 , \
			PIA60614_ := 0x0 , \
			PIA60615_ := 0x0 , \
			PIA60616_ := 0x0 , \
			PIA60617_ := 0x0 , \
			PIA60618_ := 0x0 , \
			PIA60619_ := 0x0 , \
			PIA60620_ := 0x0 , \
			PIA60621_ := 0x0 , \
			PIA60623_ := 0x0 , \
			PIA60624_ := 0x0 , \
			PIA60625_ := 0x0 , \
			PIA60626_ := 0x0 , \
			PIA60627_ := 0x0 , \
			PIA60628_ := 0x0 , \
			PIA60629_ := 0x0 , \
			PIA60630_ := 0x0 , \
			PIA60631_ := 0x0 , \
			PIA60632_ := 0x0 , \
			PIA60634_ := 0x0 , \
			PIA60635_ := 0x0 , \
			PIA60636_ := 0x0 , \
			PIA60637_ := 0x0 , \
			PIA60638_ := 0x0 , \
			PIA60639_ := 0x0 , \
			PIA60640_ := 0x0 , \
			PIA60641_ := 0x0 , \
			PIA60642_ := 0x0 , \
			PIA60643_ := 0x0 , \
			PIA60645_ := 0x0 , \
			PIA60646_ := 0x0 , \
			PIA60647_ := 0x0 , \
			PIA60648_ := 0x0 , \
			PIA60649_ := 0x0 , \
			PIA60650_ := 0x0 , \
			PIA60651_ := 0x0 , \
			PIA60652_ := 0x0 , \
			PIA60653_ := 0x0 , \
			PIA60654_ := 0x0 , \
			PIA60656_ := 0x0 , \
			PIA60657_ := 0x0 , \
			PIA60658_ := 0x0 , \
			PIA60659_ := 0x0 , \
			PIA60660_ := 0x0 , \
			PIA60661_ := 0x0 , \
			PIA60662_ := 0x0 , \
			PIA60663_ := 0x0 , \
			PIA60664_ := 0x0 , \
			PIA60665_ := 0x0 , \
			PIA60477_ := 0x0 , \
			PIA60478_ := 0x0 , \
			PIA60479_ := 0x0 , \
			PIA60480_ := 0x0 , \
			PIA60481_ := 0x0 , \
			PIA60482_ := 0x0 , \
			PIA60483_ := 0x0 , \
			PIA60484_ := 0x0 , \
			PIA60485_ := 0x0 , \
			PIA60486_ := 0x0 , \
			PIA60488_ := 0x0 , \
			PIA60489_ := 0x0 , \
			PIA60490_ := 0x0 , \
			PIA60491_ := 0x0 , \
			PIA60492_ := 0x0 , \
			PIA60493_ := 0x0 , \
			PIA60494_ := 0x0 , \
			PIA60495_ := 0x0 , \
			PIA60496_ := 0x0 , \
			PIA60497_ := 0x0 , \
			PIA60499_ := 0x0 , \
			PIA60500_ := 0x0 , \
			PIA60501_ := 0x0 , \
			PIA60502_ := 0x0 , \
			PIA60503_ := 0x0 , \
			PIA60504_ := 0x0 , \
			PIA60505_ := 0x0 , \
			PIA60506_ := 0x0 , \
			PIA60507_ := 0x0 , \
			PIA60508_ := 0x0 , \
			PIA60510_ := 0x0 , \
			PIA60511_ := 0x0 , \
			PIA60512_ := 0x0 , \
			PIA60513_ := 0x0 , \
			PIA60514_ := 0x0 , \
			PIA60515_ := 0x0 , \
			PIA60516_ := 0x0 , \
			PIA60517_ := 0x0 , \
			PIA60518_ := 0x0 , \
			PIA60519_ := 0x0 , \
			PIA60521_ := 0x0 , \
			PIA60522_ := 0x0 , \
			PIA60523_ := 0x0 , \
			PIA60524_ := 0x0 , \
			PIA60525_ := 0x0 , \
			PIA60526_ := 0x0 , \
			PIA60527_ := 0x0 , \
			PIA60528_ := 0x0 , \
			PIA60529_ := 0x0 , \
			PIA60530_ := 0x0 , \
			PIA60532_ := 0x0 , \
			PIA60533_ := 0x0 , \
			PIA60534_ := 0x0 , \
			PIA60535_ := 0x0 , \
			PIA60536_ := 0x0 , \
			PIA60537_ := 0x0 , \
			PIA60538_ := 0x0 , \
			PIA60539_ := 0x0 , \
			PIA60540_ := 0x0 , \
			PIA60541_ := 0x0 , \
			PIA60543_ := 0x0 , \
			PIA60544_ := 0x0 , \
			PIA60545_ := 0x0 , \
			PIA60546_ := 0x0 , \
			PIA60547_ := 0x0 , \
			PIA60548_ := 0x0 , \
			PIA60549_ := 0x0 , \
			PIA60550_ := 0x0 , \
			PIA60551_ := 0x0 , \
			PIA60552_ := 0x0 , \
			PIA60554_ := 0x0 , \
			PIA60555_ := 0x0 , \
			PIA60556_ := 0x0 , \
			PIA60557_ := 0x0 , \
			PIA60558_ := 0x0 , \
			PIA60559_ := 0x0 , \
			PIA60560_ := 0x0 , \
			PIA60561_ := 0x0 , \
			PIA60562_ := 0x0 , \
			PIA60563_ := 0x0 , \
			PIA60565_ := 0x0 , \
			PIA60566_ := 0x0 , \
			PIA60567_ := 0x0 , \
			PIA60568_ := 0x0 , \
			PIA60569_ := 0x0 , \
			PIA60570_ := 0x0 , \
			PIA60571_ := 0x0 , \
			PIA60572_ := 0x0 , \
			PIA60573_ := 0x0 , \
			PIA60574_ := 0x0 , \
			PIA60576_ := 0x0 , \
			PIA60577_ := 0x0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
				
		@SU_SEQPHASE2(3, "11.2.44 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "11.2.45 - Select the EAS1 Strahl bin  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58796 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60173_ := 0x18}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)				
		
		@SU_SEQPHASE2(3, "11.2.46 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
																										
		@SU_SEQPHASE2(3, "11.2.47 - Set moment elab on EAS1 ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58786 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60338_ := 0x05 , \
			PIA60339_ := 0x10}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.2.48 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "11.2.49 - Dump some EAS1 parameters	 ", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58904")	
		@SU_SEND({ AB.TC.ZIA58785 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58061_ := "CmdReadHemVRatio"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
					
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58904", *$i_RptRefNb)  -- TM	YIA58165 ; TM(6,10) SID=0 SWA_TM_MEM_CHK_RAM		
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58904.NIA01502[1].NIA01503","=222","=222") -- v1.27 typo
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58904.NIA01502[2].NIA01503","=47185","=47185")  -- v1.27 typo
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "11.2.50 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "11.2.51 - Build the EAS1 energy table  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58771 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX3" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 1}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "11.2.52 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "11.2.53 - Start normal mode on EAS1  ", *$sNumPha, "",  $sTitle)	
		$i_reportflowID := startreportflow("AB.TM.YIA58727")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58703")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58704")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58713")

		@SU_SEND({ AB.TC.ZIA58771 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0xC2}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58727", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58703", *$i_RptRefNb_1) -- every 100s	
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58704", *$i_RptRefNb_2) -- every 100s 
		stopreportflow $i_reportflowID_2

		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58713", *$i_RptRefNb_3) -- every 100s 
		stopreportflow $i_reportflowID_3
		
		@SU_SEQPHASE2(3, "11.2.54 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "11.2.55 - Stop normal mode on EAS1  ", *$sNumPha, "",  $sTitle)							
		@SU_SEND({ AB.TC.ZIA58771 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@SU_SEQPHASE2(3, "11.2.56 - *WAIT*, 0:60:00 (60 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		***********************************************************************
		@SU_SEQPHASE2(1, "12 EAS2 TEST", *$sNumPha, "",  $sTitle)
		***********************************************************************

		@SU_SEQPHASE2(2, "12.1 - Macros Test", *$sNumPha, "",  $sTitle)

		@SU_SEQPHASE2(3, "12.1.1 - Set the master control register for manual heater on EAS2", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58824 , \
			PIA60423_ := 0 , \
			PIA60424_ := 0x40 , \
			PIA60425_ := 0x60 }, $sTrace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
			
	  	@SU_SEQPHASE2(3, "12.1.2 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		if ($sPlatform = "FM")
		   	@SU_SEQPHASE2(3, "12.1.3 - Turn the manual heater on for EAS2 FM", *$sNumPha, "",  $sTitle)	
			@SU_SEND({ AB.TC.ZIA58805 , \
				PIA60773_ := 0 , \
				PIA60774_ := 0x01 , \
				PIA60775_ := 0x60 }, $sTrace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		 

		else --  ($sPlatform = 'ETB')
		   	@SU_SEQPHASE2(3, "12.1.3 - Turn the manual heater on for EAS2 EM", *$sNumPha, "",  $sTitle)	
			@SU_SEND({ AB.TC.ZIA58805 , \
				PIA60773_ := 0 , \
				PIA60774_ := 0x00 , \
				PIA60775_ := 0xC0 }, $sTrace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		 
		endif	

	  	@SU_SEQPHASE2(3, "12.1.4 - Wait 00:02:30 (150 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(150)
			
		@SU_SEQPHASE2(3, "12.1.5 - Check the EAS2 current in the DPU HK and the EAS2 temp in the EAS2 HK", *$sNumPha, "",  $sTitle)	-- v1.23
		@RPZA_HKTM_CATCH("AB.TM.YIA58200", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00832",">=60","<=300", $sTrace, 5)
				
		@RPZA_HKTM_CATCH("AB.TM.YIA58202", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA10907",">=280","<=330", $sTrace, 5)
			
		@SU_SEQPHASE2(3, "11.1.6 - Turn the manual heater OFF for EAS2", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58805 , \
			PIA60773_ := 0 , \
			PIA60774_ := 0x0 , \
			PIA60775_ := 0x0 }, $sTrace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

	  	@SU_SEQPHASE2(3, "12.1.7 - Wait 00:05:00 (300 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(300)

		@SU_SEQPHASE2(3, "12.1.8 - Check the EAS2 current in the DPU HK and the EAS2 temp in the EAS2 HK", *$sNumPha, "",  $sTitle)	-- v1.23
		@RPZA_HKTM_CATCH("AB.TM.YIA58200", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00832",">=60","<=300", $sTrace, 5)
				
		@RPZA_HKTM_CATCH("AB.TM.YIA58202", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA10907",">=280","<=330", $sTrace, 5)

		@SU_SEQPHASE2(3, "12.1.9 - Start normal mode on EAS2 ", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58727")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58701")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58702")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58711")

		@SU_SEND({ AB.TC.ZIA58819 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0xC2}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58727", *$i_RptRefNb,120) 
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58701", *$i_RptRefNb_1,120) -- every 100s
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58702", *$i_RptRefNb_2,120) -- every 100s 
		stopreportflow $i_reportflowID_2

		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58711", *$i_RptRefNb_3,120) -- every 100s 
		stopreportflow $i_reportflowID_3
							
	  	@SU_SEQPHASE2(3, "12.1.10 - Wait 00:02:00 (120 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(120)	-- v1.23

		@SU_SEQPHASE2(3, "12.1.11 - Switch to no science mode on EAS2", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58819 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.1.12 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "12.1.13 - Switch to Eng mode 2 on EAS2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58941") -- v1.27 OBS #10
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58943")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58945")

		@SU_SEND({ AB.TC.ZIA58836 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60165_ := 10}, $s_Trace, VER := "ACK", TIMEOUT_VER := 300)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58941", *$i_RptRefNb,120) -- v1.27 OBS #10
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58943", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58945", *$i_RptRefNb_2,120)
		stopreportflow $i_reportflowID_2
			
		@SU_SEQPHASE2(3, "12.1.14 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "12.1.15 - Run post-eng mode macro on EAS2 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58936 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60740_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.1.16 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "12.1.17 - Switch to Sweeping Eng mode 3 on EAS2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58926")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58924")

		@SU_SEND({ AB.TC.ZIA58837 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60101_ := 0 , \
			FI2_:OBV := 0 , \
			PIA60100_ := 0xFF , \
			FI3_:OBV := 0 , \
			PIA60102_ := 0xF , \
			PIA60437_ := 0xA , \
			PIA60444_ := 1 , \
			PIA60165_ := 2 , \
			FI4_:OBV := 0 , \
			PIA60760_ := 0x20 , \
			PIA60761_ := 0x8 , \
			PIA60762_ := "SWEEP_MACRO"}, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58926", *$i_RptRefNb,120) 
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58924", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@SU_SEQPHASE2(3, "12.1.18 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "12.1.19 - Switch to Nominal Eng mode 3 on EAS2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58926")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58924")

		@SU_SEND({ AB.TC.ZIA58837 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60101_ := 0 , \
			FI2_:OBV := 0 , \
			PIA60100_ := 0xFF , \
			FI3_:OBV := 0 , \
			PIA60102_ := 0xF , \
			PIA60437_ := 0xA , \
			PIA60444_ := 1 , \
			PIA60165_ := 2 , \
			FI4_:OBV := 0 , \
			PIA60760_ := 0x20 , \
			PIA60761_ := 0x8 , \
			PIA60762_ := "FIXED_MACRO"}, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58926", *$i_RptRefNb,120) 
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58924", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@SU_SEQPHASE2(3, "12.1.20 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "12.1.21 - Run post-eng mode macro on EAS2", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58936 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60740_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.1.22 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "12.1.23 - Switch to Eng mode 4 on EAS2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58926")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58924")

		@SU_SEND({ AB.TC.ZIA58838 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60104_ := 0x724 , \
			FI2_:OBV := 0 , \
			PIA60103_ := 0x477 , \
			FI3_:OBV := 0 , \
			PIA60105_ := 0x200 , \
			PIA60106_ := 0x0 , \
			PIA60165_ := 0xA , \
			PIA60851_ := 2 , \
			FI4_:OBV := 0 , \
			PIA60760_:OBV := 0x20 , \
			PIA60761_:OBV := 0x8 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58926", *$i_RptRefNb,120) 
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58924", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@SU_SEQPHASE2(3, "12.1.24 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "12.1.25 - Run post-eng mode macro on EAS2", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58936 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60740_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.1.26 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "12.1.27 - Switch to Eng mode 5 on EAS2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58941") -- v1.27 OBS #10
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58943")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58945")

		@SU_SEND({ AB.TC.ZIA58839 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60454_ := 0xFF , \
			FI2_:OBV := 0 , \
			PIA60455_ := 0xFF , \
			FI3_:OBV := 0 , \
			PIA60040_ := 0x724 , \
			FI4_:OBV := 0 , \
			PIA60039_ := 0x477 , \
			FI5_:OBV := 0 , \
			PIA60041_ := 0x76 , \
			FI6_:OBV := 0 , \
			PIA60106_ := 0x0 , \
			PIA60171_ := 0xA , \
			PIA60165_ := 2 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58941", *$i_RptRefNb,120) -- v1.27 OBS #10
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58943", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58945", *$i_RptRefNb_2,120)
		stopreportflow $i_reportflowID_2
							
		@SU_SEQPHASE2(3, "12.1.28 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "12.1.29 - Run post-eng mode macro on EAS2", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58936 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60740_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.1.30 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "12.1.31 - Switch to Eng mode 6 on EAS2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58941") -- v1.27 OBS #10
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58943")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58945")

		@SU_SEND({ AB.TC.ZIA58840 , \ -- v1.23
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60457_ := 0xFF , \
			FI2_:OBV := 0 , \
			PIA60458_ := 0x32 , \
			FI3_:OBV := 0 , \
			PIA60459_ := 0x29 , \
			FI4_:OBV := 0 , \
			PIA60106_ := 0x0 , \
			PIA60171_ := 0xA , \
			PIA60165_ := 2 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58941", *$i_RptRefNb,120) -- v1.27 OBS #10
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58943", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1
		
		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58945", *$i_RptRefNb_2,120)
		stopreportflow $i_reportflowID_2

		@SU_SEQPHASE2(3, "12.1.32 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)
							
		@SU_SEQPHASE2(3, "12.1.33 - Run post-eng mode macro on EAS2", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58936 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60740_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
							
		@SU_SEQPHASE2(3, "12.1.34 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

 		@SU_SEQPHASE2(2, "12.1.35 - Switch to Eng mode 8 on EAS2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58941") -- v1.27 OBS #10
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58943")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58945")

		@SU_SEND({ AB.TC.ZIA58842 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60735_ := 0xFF , \
			FI2_:OBV := 0 , \
			PIA60716_ := 0x32 , \
			PIA60165_ := 0x10 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 150)
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58941", *$i_RptRefNb,120) -- v1.27 OBS #10
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58943", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58945", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_2

		@SU_SEQPHASE2(3, "12.1.36 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "12.1.37 - Run post-eng mode macro on EAS2 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58936 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60740_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.1.38 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

 		@SU_SEQPHASE2(2, "12.1.39 - Switch to Eng mode 9 on EAS2", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58941") -- v1.27 OBS #10
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58943")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58945")

		@SU_SEND({ AB.TC.ZIA58843 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60165_ := 0x10 }, $s_Trace, VER := "ACK", TIMEOUT_VER := 70) -- v1.23 -- v1.27 ACK only
			
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58941", *$i_RptRefNb,120) -- v1.27 OBS #10
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58943", *$i_RptRefNb_1,120)
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58945", *$i_RptRefNb_2,120)
		stopreportflow $i_reportflowID_2

		@SU_SEQPHASE2(3, "12.1.40 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(2, "12.1.41	- Run post-eng mode macro on EAS2 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58936 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60740_ := "POST_ENG"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.1.42 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(2, "12.1.43	- Power down EAS2", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58809 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_HKTM_CATCH("AB.TM.YIA58200", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00832",">=0","<=20", $sTrace, 5)

		@SU_SEQPHASE2(3, "12.1.44 - *WAIT*, 0:02:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(120)

		**********************************************************************************					
		@SU_SEQPHASE2(2, "12.2 Test EAS2 Low Level Commands", *$sNumPha, "",  $sTitle)
		***********************************************************************************

		@SU_SEQPHASE2(3, "12.2.1 - Power up EAS2 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58803 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_HKTM_CATCH("AB.TM.YIA58200", "WAIT" , *$Count , 90)
		@su_anaacs("AB.TM.NIA00832",">=60","<=106", $sTrace, 5)

		@SU_SEQPHASE2(3, "12.2.2 - *WAIT*, 0:01:00, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		@SU_SEQPHASE2(3, "12.2.3- Clear EAS2 shared RAM ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58811 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.2.4 - Wait 30 seconds, Request EAS2 HK packet", *$sNumPha, "",  $sTitle)
		@su_wait(30)

		@SU_SEND({ AB.TC.ZIA58830 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
	
		@RPZA_HKTM_CATCH("AB.TM.YIA58202", "WAIT" , *$Count , 20)
		@su_anaacs("AB.TM.NIA10903",">=2.5","<=4.0", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA10905",">=1.0","<=2.0", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA10907",">=280","<=310", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA10909",">=20","<=40", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA10910",">=0","<=1", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA10911",">=0","<=1", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA10912",">=2","<=10", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA10914",">=25","<=30", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA10915",">=280","<=310", $s_Trace, 10) 
		@su_anaacs("AB.TM.NIA10916",">=280","<=310", $s_Trace, 10) 

		@SU_SEQPHASE2(3, "12.2.5 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)

		@SU_SEQPHASE2(3, "12.2.6 - Set EAS2 master control register ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58824 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60423_ := 0x00 , \
			PIA60424_ := 0x00 , \
			PIA60425_ := 0x60 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.2.7 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)

		@SU_SEQPHASE2(3, "12.2.8	- Turn EAS2 preamp1 on", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58825 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58066_ := "ON" , \
			PIA58067_ := "OFF"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.2.9 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "12.2.10	- Turn EAS2 preamp2 on ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58825 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58066_ := "ON" , \
			PIA58067_ := "ON"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.2.11 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "12.2.12 - Upload sequence to EAS2 ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58820 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "12.2.13 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "12.2.14 - Set EAS2 deflector ratios", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58813 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60474_ := 0x80 , \
			PIA60475_ := 0x00 , \
			PIA60578_ := 0x00 , \
			PIA60589_ := 0x00 , \
			PIA60600_ := 0x00 , \
			PIA60611_ := 0x00 , \
			PIA60622_ := 0x80 , \
			PIA60633_ := 0x00 , \
			PIA60644_ := 0x00 , \
			PIA60655_ := 0x00 , \
			PIA60476_ := 0x00 , \
			PIA60487_ := 0x00 , \
			PIA60498_ := 0x70 , \
			PIA60509_ := 0x00 , \
			PIA60520_ := 0x00 , \
			PIA60531_ := 0x00 , \
			PIA60542_ := 0x00 , \
			PIA60553_ := 0x00 , \
			PIA60564_ := 0x60 , \
			PIA60575_ := 0x00 , \
			PIA60579_ := 0x00 , \
			PIA60580_ := 0x00 , \
			PIA60581_ := 0x00 , \
			PIA60582_ := 0x00 , \
			PIA60583_ := 0x50 , \
			PIA60584_ := 0x00 , \
			PIA60585_ := 0x00 , \
			PIA60586_ := 0x00 , \
			PIA60587_ := 0x00 , \
			PIA60588_ := 0x00 , \
			PIA60590_ := 0x40 , \
			PIA60591_ := 0x00 , \
			PIA60592_ := 0x00 , \
			PIA60593_ := 0x00 , \
			PIA60594_ := 0x00 , \
			PIA60595_ := 0x00 , \
			PIA60596_ := 0x30 , \
			PIA60597_ := 0x00 , \
			PIA60598_ := 0x00 , \
			PIA60599_ := 0x00 , \
			PIA60601_ := 0x00 , \
			PIA60602_ := 0x00 , \
			PIA60603_ := 0x20 , \
			PIA60604_ := 0x00 , \
			PIA60605_ := 0x00 , \
			PIA60606_ := 0x00 , \
			PIA60607_ := 0x00 , \
			PIA60608_ := 0x00 , \
			PIA60609_ := 0x00 , \
			PIA60610_ := 0x00 , \
			PIA60612_ := 0x00 , \
			PIA60613_ := 0x20 , \
			PIA60614_ := 0x00 , \
			PIA60615_ := 0x00 , \
			PIA60616_ := 0x00 , \
			PIA60617_ := 0x00 , \
			PIA60618_ := 0x00 , \
			PIA60619_ := 0x30 , \
			PIA60620_ := 0x00 , \
			PIA60621_ := 0x00 , \
			PIA60623_ := 0x00 , \
			PIA60624_ := 0x00 , \
			PIA60625_ := 0x00 , \
			PIA60626_ := 0x40 , \
			PIA60627_ := 0x00 , \
			PIA60628_ := 0x00 , \
			PIA60629_ := 0x00 , \
			PIA60630_ := 0x00 , \
			PIA60631_ := 0x00 , \
			PIA60632_ := 0x50 , \
			PIA60634_ := 0x00 , \
			PIA60635_ := 0x00 , \
			PIA60636_ := 0x00 , \
			PIA60637_ := 0x00 , \
			PIA60638_ := 0x00 , \
			PIA60639_ := 0x60 , \
			PIA60640_ := 0x00 , \
			PIA60641_ := 0x00 , \
			PIA60642_ := 0x00 , \
			PIA60643_ := 0x00 , \
			PIA60645_ := 0x00 , \
			PIA60646_ := 0x70 , \
			PIA60647_ := 0x00 , \
			PIA60648_ := 0x00 , \
			PIA60649_ := 0x00 , \
			PIA60650_ := 0x00 , \
			PIA60651_ := 0x00 , \
			PIA60652_ := 0x80 , \
			PIA60653_ := 0x00 , \
			PIA60654_ := 0x00 , \
			PIA60656_ := 0x00 , \
			PIA60657_ := 0x00 , \
			PIA60658_ := 0x00 , \
			PIA60659_ := 0x80 , \
			PIA60660_ := 0x00 , \
			PIA60661_ := 0x00 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.2.15 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "12.2.16 - Set EAS2 hemisphere voltage max ", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58815 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60441_:OBV := 0x04 , \
			PIA60442_:OBV := 0x00 , \
			PIA60443_:OBV := 0x00}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
					
		@SU_SEQPHASE2(3, "12.2.17 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
			
		@SU_SEQPHASE2(3, "12.2.18 - Set EAS2 hemisphere voltage ratio", *$sNumPha, "",  $sTitle)
		@SU_SEND({ AB.TC.ZIA58814 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60469_ := 0xDE , \
			PIA60470_ := 0xB8 , \
			PIA60471_ := 0x51}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "12.2.19 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "12.2.20 - Load the EAS2 VGF ratio ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58816 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60460_ := 0 , \
			PIA60461_ := 0 , \
			PIA60462_ := 0 , \
			PIA60463_ := 0 , \
			PIA60464_ := 0 , \
			PIA60465_ := 0 , \
			PIA60466_ := 0 , \
			PIA60467_ := 0 , \
			PIA60468_ := 0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		

		@SU_SEQPHASE2(3, "12.2.21 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "12.2.22 - Load the EAS2 VGF pointer ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58818 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59035_ := 0.000000}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		
		
		@SU_SEQPHASE2(3, "12.2.23 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "12.2.24 - Start the EAS2 sequence ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58821 , \
			SHF:OBV := 0 , \
			SID:OBV := 120}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "12.2.25 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "12.2.26 - Load the EAS2 MCP max voltage ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58831 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60169_ := 0x800 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.2.27 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "12.2.28 - Load the EAS2 MCP ramp voltage  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58832 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60218_ := 0x400}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
		
		@SU_SEQPHASE2(3, "12.2.29 - *WAIT*, 0:00:40 (40 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(40)

		@SU_SEQPHASE2(3, "12.2.30 - Wait 40 seconds for MCP ramp and HK update and Check the MCP voltage in the EAS2 HK", *$sNumPha, "",  $sTitle)	
		@RPZA_HKTM_CATCH("AB.TM.YIA58202", "WAIT" , *$Count , 40)
		@su_anaacs("AB.TM.NIA10910",">=0","<=15", $s_Trace, 10)				

		@SU_SEQPHASE2(3, "12.2.31 - Load the EAS2 grid voltage and Check the Grid voltage in the EAS2 HK", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58829 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60423_ := 0x00 , \
			PIA60424_ := 0x08 , \
			PIA60425_ := 0x00}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_HKTM_CATCH("AB.TM.YIA58202", "WAIT" , *$Count , 40)
		@su_anaacs("AB.TM.NIA10911",">=-10","<=0", $s_Trace, 10)
							
		@SU_SEQPHASE2(3, "12.2.32 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "12.2.33 - Load the EAS1 Voltage offsets    ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58817 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60411_ := 0x00 , \
			PIA60412_ := 0x00 , \
			PIA60415_ := 0x00 , \
			PIA60416_ := 0x00 , \
			PIA60417_ := 0x00 , \
			PIA60418_ := 0x00 , \
			PIA60419_ := 0x00 , \
			PIA60420_ := 0x00 , \
			PIA60421_ := 0x00 , \
			PIA60422_ := 0x00 , \
			PIA60413_ := 0x00 , \
			PIA60414_ := 0x00}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
							
		@SU_SEQPHASE2(3, "12.2.34 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
						
		@SU_SEQPHASE2(3, "12.2.35 -  Load the EAS2 Dither value  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58802 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60736_:OBV := 0x00 , \
			PIA60737_:OBV := 0x00 , \
			PIA60738_:OBV := 0x00}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
					
		@SU_SEQPHASE2(3, "12.2.36 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "12.2.37 -  Load the EAS2 stim values on preamp1  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58822 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60013_ := "PRE-AMP1" , \
			FI1_:OBV := 0 , \
			PIA60429_ := 0x00 , \
			PIA60430_ := 0x0F , \
			PIA60431_ := 0xF0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)		
			
		@SU_SEQPHASE2(3, "12.2.38 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "12.2.39 -  Load the EAS2 stim values on preamp2   ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58822 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60013_ := "PRE-AMP2" , \
			FI1_:OBV := 0 , \
			PIA60429_ := 0x00 , \
			PIA60430_ := 0x0F , \
			PIA60431_ := 0xF0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)									
							
		@SU_SEQPHASE2(3, "12.2.40 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "12.2.41 -  Load the EAS2 threshold values    ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58845 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60174_ := 0x5F40 , \
			PIA60185_ := 0x5F41 , \
			PIA60196_ := 0x5F42 , \
			PIA60200_ := 0x5F43 , \
			PIA60201_ := 0x5F44 , \
			PIA60202_ := 0x5F45 , \
			PIA60203_ := 0x6586 , \
			PIA60204_ := 0x6587 , \
			PIA60205_ := 0x66C8 , \
			PIA60175_ := 0x5F49 , \
			PIA60176_ := 0x5F4A , \
			PIA60177_ := 0x5F4B , \
			PIA60178_ := 0x5F4C , \
			PIA60179_ := 0x5F4D , \
			PIA60180_ := 0x5F4E , \
			PIA60181_ := 0x5F4F , \
			PIA60182_ := 0x5F40 , \
			PIA60183_ := 0x5F41 , \
			PIA60184_ := 0x5F42 , \
			PIA60186_ := 0x5F43 , \
			PIA60187_ := 0x5F44 , \
			PIA60188_ := 0x5F45 , \
			PIA60189_ := 0x5F46 , \
			PIA60190_ := 0x5F47 , \
			PIA60191_ := 0x5F48 , \
			PIA60192_ := 0x5F49 , \
			PIA60193_ := 0x5F4A , \
			PIA60194_ := 0x5CCB , \
			PIA60195_ := 0x5F4C , \
			PIA60197_ := 0x5F4D , \
			PIA60198_ := 0x5F4E , \
			PIA60199_ := 0x5F4F}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)	
							
		@SU_SEQPHASE2(3, "12.2.42 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "12.2.43 -  Upload a LUT to the EAS2 energy table   ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58812 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60474_ := 0x0 , \
			PIA60475_ := 0x0 , \
			PIA60578_ := 0x0 , \
			PIA60589_ := 0x0 , \
			PIA60600_ := 0x0 , \
			PIA60611_ := 0x0 , \
			PIA60622_ := 0x0 , \
			PIA60633_ := 0x0 , \
			PIA60644_ := 0x0 , \
			PIA60655_ := 0x0 , \
			PIA60476_ := 0x0 , \
			PIA60487_ := 0x0 , \
			PIA60498_ := 0x0 , \
			PIA60509_ := 0x0 , \
			PIA60520_ := 0x0 , \
			PIA60531_ := 0x0 , \
			PIA60542_ := 0x0 , \
			PIA60553_ := 0x0 , \
			PIA60564_ := 0x0 , \
			PIA60575_ := 0x0 , \
			PIA60579_ := 0x0 , \
			PIA60580_ := 0x0 , \
			PIA60581_ := 0x0 , \
			PIA60582_ := 0x0 , \
			PIA60583_ := 0x0 , \
			PIA60584_ := 0x0 , \
			PIA60585_ := 0x0 , \
			PIA60586_ := 0x0 , \
			PIA60587_ := 0x0 , \
			PIA60588_ := 0x0 , \
			PIA60590_ := 0x0 , \
			PIA60591_ := 0x0 , \
			PIA60592_ := 0x0 , \
			PIA60593_ := 0x0 , \
			PIA60594_ := 0x0 , \
			PIA60595_ := 0x0 , \
			PIA60596_ := 0x0 , \
			PIA60597_ := 0x0 , \
			PIA60598_ := 0x0 , \
			PIA60599_ := 0x0 , \
			PIA60601_ := 0x0 , \
			PIA60602_ := 0x0 , \
			PIA60603_ := 0x0 , \
			PIA60604_ := 0x0 , \
			PIA60605_ := 0x0 , \
			PIA60606_ := 0x0 , \
			PIA60607_ := 0x0 , \
			PIA60608_ := 0x0 , \
			PIA60609_ := 0x0 , \
			PIA60610_ := 0x0 , \
			PIA60612_ := 0x0 , \
			PIA60613_ := 0x0 , \
			PIA60614_ := 0x0 , \
			PIA60615_ := 0x0 , \
			PIA60616_ := 0x0 , \
			PIA60617_ := 0x0 , \
			PIA60618_ := 0x0 , \
			PIA60619_ := 0x0 , \
			PIA60620_ := 0x0 , \
			PIA60621_ := 0x0 , \
			PIA60623_ := 0x0 , \
			PIA60624_ := 0x0 , \
			PIA60625_ := 0x0 , \
			PIA60626_ := 0x0 , \
			PIA60627_ := 0x0 , \
			PIA60628_ := 0x0 , \
			PIA60629_ := 0x0 , \
			PIA60630_ := 0x0 , \
			PIA60631_ := 0x0 , \
			PIA60632_ := 0x0 , \
			PIA60634_ := 0x0 , \
			PIA60635_ := 0x0 , \
			PIA60636_ := 0x0 , \
			PIA60637_ := 0x0 , \
			PIA60638_ := 0x0 , \
			PIA60639_ := 0x0 , \
			PIA60640_ := 0x0 , \
			PIA60641_ := 0x0 , \
			PIA60642_ := 0x0 , \
			PIA60643_ := 0x0 , \
			PIA60645_ := 0x0 , \
			PIA60646_ := 0x0 , \
			PIA60647_ := 0x0 , \
			PIA60648_ := 0x0 , \
			PIA60649_ := 0x0 , \
			PIA60650_ := 0x0 , \
			PIA60651_ := 0x0 , \
			PIA60652_ := 0x0 , \
			PIA60653_ := 0x0 , \
			PIA60654_ := 0x0 , \
			PIA60656_ := 0x0 , \
			PIA60657_ := 0x0 , \
			PIA60658_ := 0x0 , \
			PIA60659_ := 0x0 , \
			PIA60660_ := 0x0 , \
			PIA60661_ := 0x0 , \
			PIA60662_ := 0x0 , \
			PIA60663_ := 0x0 , \
			PIA60664_ := 0x0 , \
			PIA60665_ := 0x0 , \
			PIA60477_ := 0x0 , \
			PIA60478_ := 0x0 , \
			PIA60479_ := 0x0 , \
			PIA60480_ := 0x0 , \
			PIA60481_ := 0x0 , \
			PIA60482_ := 0x0 , \
			PIA60483_ := 0x0 , \
			PIA60484_ := 0x0 , \
			PIA60485_ := 0x0 , \
			PIA60486_ := 0x0 , \
			PIA60488_ := 0x0 , \
			PIA60489_ := 0x0 , \
			PIA60490_ := 0x0 , \
			PIA60491_ := 0x0 , \
			PIA60492_ := 0x0 , \
			PIA60493_ := 0x0 , \
			PIA60494_ := 0x0 , \
			PIA60495_ := 0x0 , \
			PIA60496_ := 0x0 , \
			PIA60497_ := 0x0 , \
			PIA60499_ := 0x0 , \
			PIA60500_ := 0x0 , \
			PIA60501_ := 0x0 , \
			PIA60502_ := 0x0 , \
			PIA60503_ := 0x0 , \
			PIA60504_ := 0x0 , \
			PIA60505_ := 0x0 , \
			PIA60506_ := 0x0 , \
			PIA60507_ := 0x0 , \
			PIA60508_ := 0x0 , \
			PIA60510_ := 0x0 , \
			PIA60511_ := 0x0 , \
			PIA60512_ := 0x0 , \
			PIA60513_ := 0x0 , \
			PIA60514_ := 0x0 , \
			PIA60515_ := 0x0 , \
			PIA60516_ := 0x0 , \
			PIA60517_ := 0x0 , \
			PIA60518_ := 0x0 , \
			PIA60519_ := 0x0 , \
			PIA60521_ := 0x0 , \
			PIA60522_ := 0x0 , \
			PIA60523_ := 0x0 , \
			PIA60524_ := 0x0 , \
			PIA60525_ := 0x0 , \
			PIA60526_ := 0x0 , \
			PIA60527_ := 0x0 , \
			PIA60528_ := 0x0 , \
			PIA60529_ := 0x0 , \
			PIA60530_ := 0x0 , \
			PIA60532_ := 0x0 , \
			PIA60533_ := 0x0 , \
			PIA60534_ := 0x0 , \
			PIA60535_ := 0x0 , \
			PIA60536_ := 0x0 , \
			PIA60537_ := 0x0 , \
			PIA60538_ := 0x0 , \
			PIA60539_ := 0x0 , \
			PIA60540_ := 0x0 , \
			PIA60541_ := 0x0 , \
			PIA60543_ := 0x0 , \
			PIA60544_ := 0x0 , \
			PIA60545_ := 0x0 , \
			PIA60546_ := 0x0 , \
			PIA60547_ := 0x0 , \
			PIA60548_ := 0x0 , \
			PIA60549_ := 0x0 , \
			PIA60550_ := 0x0 , \
			PIA60551_ := 0x0 , \
			PIA60552_ := 0x0 , \
			PIA60554_ := 0x0 , \
			PIA60555_ := 0x0 , \
			PIA60556_ := 0x0 , \
			PIA60557_ := 0x0 , \
			PIA60558_ := 0x0 , \
			PIA60559_ := 0x0 , \
			PIA60560_ := 0x0 , \
			PIA60561_ := 0x0 , \
			PIA60562_ := 0x0 , \
			PIA60563_ := 0x0 , \
			PIA60565_ := 0x0 , \
			PIA60566_ := 0x0 , \
			PIA60567_ := 0x0 , \
			PIA60568_ := 0x0 , \
			PIA60569_ := 0x0 , \
			PIA60570_ := 0x0 , \
			PIA60571_ := 0x0 , \
			PIA60572_ := 0x0 , \
			PIA60573_ := 0x0 , \
			PIA60574_ := 0x0 , \
			PIA60576_ := 0x0 , \
			PIA60577_ := 0x0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
				
		@SU_SEQPHASE2(3, "12.2.44 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "12.2.45 - Select the EAS2 Strahl bin  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58844 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60173_ := 0x18}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)				
		
		@SU_SEQPHASE2(3, "12.2.46 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
																										
		@SU_SEQPHASE2(3, "12.2.47 - Set moment elab on EAS2 ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58834 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60338_ := 0x05 , \
			PIA60339_ := 0x10}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.2.48 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "12.2.49 - Dump some EAS2 parameters	 ", *$sNumPha, "",  $sTitle)
		$i_reportflowID := startreportflow("AB.TM.YIA58905")
		
		@SU_SEND({ AB.TC.ZIA58833 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA58061_ := "CmdReadHemVRatio"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)
					
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58905", *$i_RptRefNb)  -- TM	YIA58165 ; TM(6,10) SID=0 SWA_TM_MEM_CHK_RAM		
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58905.NIA01502[1].NIA01503","=222","=222") -- v1.27 typo
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58905.NIA01502[2].NIA01503","=184","=184") -- v1.27 OBS #11
		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58905.NIA01502[3].NIA01503","=81","=81") -- v1.27 OBS #11
		stopreportflow $i_reportflowID

		@SU_SEQPHASE2(3, "12.2.50 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "12.2.51 - Build the EAS2 energy table  ", *$sNumPha, "",  $sTitle)	
		@SU_SEND({ AB.TC.ZIA58819 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX3" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 1}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@SU_SEQPHASE2(3, "12.2.52 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "12.2.53 - Start normal mode on EAS2  ", *$sNumPha, "",  $sTitle)	
		$i_reportflowID := startreportflow("AB.TM.YIA58727")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58701")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58702")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58711")

		@SU_SEND({ AB.TC.ZIA58819 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0xC2}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58727", *$i_RptRefNb)
		stopreportflow $i_reportflowID

		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58701", *$i_RptRefNb_1) -- every 100s	
		stopreportflow $i_reportflowID_1

		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58702", *$i_RptRefNb_2) -- every 100s 
		stopreportflow $i_reportflowID_2

		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58711", *$i_RptRefNb_3) -- every 100s 
		stopreportflow $i_reportflowID_3
		
		@SU_SEQPHASE2(3, "12.2.54 - *WAIT*, 0:00:02 (2 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(2)
													
		@SU_SEQPHASE2(3, "12.2.55 - Stop normal mode on EAS2", *$sNumPha, "",  $sTitle)							
		@SU_SEND({ AB.TC.ZIA58819 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@SU_SEQPHASE2(3, "12.2.56 - *WAIT*, 0:60:00 (60 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(60)

		**********************************************************************************				
		@SU_SEQPHASE2(2, "13 - Test all Sensors ", *$sNumPha, "",  $sTitle)
		**********************************************************************************	

		@SU_SEQPHASE2(3, "13.1.1 - Configure HIS DSCB for Normal Coincidence (TOF only) ", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "DSCB_REG_CTR_ST" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

	  	@SU_SEQPHASE2(3, "13.1.2 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		@SU_SEQPHASE2(3, "13.1.3 - Configure HIS to no HV sweeping (static output only)", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_ANALYZER" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

	  	@SU_SEQPHASE2(3, "13.1.4 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		@SU_SEQPHASE2(3, "13.1.5 - Configure HIS to no HV sweeping (static output only)", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_DFL" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

	  	@SU_SEQPHASE2(3, "13.1.6 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		@SU_SEQPHASE2(3, "13.1.7 - Configure HIS to no HV sweeping (static output only)", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_BOT_DFL" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

	  	@SU_SEQPHASE2(3, "13.1.8 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		@SU_SEQPHASE2(3, "13.1.9 - Configure HIS to no HV sweeping (static output only)", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_PLATE" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@SU_SEQPHASE2(3, "13.1.10 - Put HIS into normal science mode ", *$sNumPha, "",  $sTitle)							
		$i_reportflowID := startreportflow("AB.TM.YIA58800")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58810")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58807")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58804")

		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "NORMAL_SCI"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58800", *$i_RptRefNb) -- TM(21,3) SSID=128 SWA_TM_HIS_SCI_CONF_NORM; 1 packet every 30 seconds 
		stopreportflow $i_reportflowID
		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58810", *$i_RptRefNb, 300) -- TM(21,6) SSID=132 SWA_TM_HIS_SCI_LOW_LATENCY_NORM; 1 packet every 300 seconds
		stopreportflow $i_reportflowID_1
		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58807", *$i_RptRefNb) -- TM(21,6) SSID=130 SWA_TM_HIS_SCI_VDF_NORM; 1 packet every 30 seconds
		stopreportflow $i_reportflowID_2
		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58804", *$i_RptRefNb) -- TM(21,6) SSID=131 SWA_TM_HIS_SCI_SENS_PRIO_NORM; 2 packets every 30s
		stopreportflow $i_reportflowID_3

		@SU_SEQPHASE2(3, "13.1.11 - Start normal mode on EAS1 via the mailbox ", *$sNumPha, "",  $sTitle)							
		$i_reportflowID := startreportflow("AB.TM.YIA58727")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58703")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58704")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58713")

		@SU_SEND({ AB.TC.ZIA58771 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0xC2 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58727", *$i_RptRefNb) -- TM(21,3) SSID=20 SWA_TM_SCI_EAS_PARTIAL_MOMENTS_RAW_DATA; 1 packet every 4 seconds  
		stopreportflow $i_reportflowID
		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58703", *$i_RptRefNb) -- TM(21,3) SSID=0 SWA_TM_SCI_EAS1_FULL3D_RAW_HEAD; 1 packet every 100 seconds
		stopreportflow $i_reportflowID_1
		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58704", *$i_RptRefNb) -- TM(21,6) SSID=1 SWA_TM_SCI_EAS1_FULL3D_RAW_DATA; 17 packets every 100 seconds
		stopreportflow $i_reportflowID_2
		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58713", *$i_RptRefNb) -- TM(21,6) SSID=9 SWA_TM_SCI_EAS1_STRAHL_RAW_DATA; 1 packet every 100 seconds  
		stopreportflow $i_reportflowID_3

		@SU_SEQPHASE2(3, "13.1.12 - Start normal mode on EAS2 via the mailbox", *$sNumPha, "",  $sTitle)							
		$i_reportflowID := startreportflow("AB.TM.YIA58701")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58702")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58711")

		@SU_SEND({ AB.TC.ZIA58819 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0xC2 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58701", *$i_RptRefNb) -- TM(21,3) SSID=30 SWA_TM_SCI_EAS2_FULL3D_RAW_HEAD; 1 packet every 100 seconds 
		stopreportflow $i_reportflowID
		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58702", *$i_RptRefNb) -- TM(21,6) SSID=31 SWA_TM_SCI_EAS2_FULL3D_RAW_DATA; 17 packet every 100 seconds
		stopreportflow $i_reportflowID_1
		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58711", *$i_RptRefNb) -- TM(21,6) SSID=39 SWA_TM_SCI_EAS2_STRAHL_RAW_DATA; 1 packet every 100 seconds
		stopreportflow $i_reportflowID_2

		if ($sPAS_HVSafety = "AIRSAFE")
		
			-- THIS COMMAND CAN ONLY BE EXECUTED IF AIRSAFE PLUG IS INSTALLED
			-- DO NOT EXECUTE THIS COMMAND IF DISABLE PLUG IS INSTALLED

			@SU_SEQPHASE2(3, "13.1.13 - Start PAS Science Cyclogram", *$sNumPha, "",  $sTitle)							
			$i_reportflowID := startreportflow("AB.TM.YIA58700")
			$i_reportflowID_1 := startreportflow("AB.TM.YIA58705")
			$i_reportflowID_2 := startreportflow("AB.TM.YIA58982")
			$i_reportflowID_3 := startreportflow("AB.TM.YIA58992")
			$i_reportflowID_4 := startreportflow("AB.TM.YIA58993")
			$i_reportflowID_5 := startreportflow("AB.TM.YIA58729")

			@SU_SEND({ AB.TC.ZIA58943 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60777_ := "PasNc1" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

			@SU_SEQPHASE2(3, "Check PAS packets arrive:", *$sNumPha, "",  $sTitle)							

			@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58700", *$i_RptRefNb) -- TM(21,3) SID=192 SWA_TM_SCI_PAS_FULL3D_RAW_HEAD; 1 packet every 4 seconds 
			stopreportflow $i_reportflowID
			@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58705", *$i_RptRefNb) -- TM(21,6) SID=193 SWA_TM_SCI_PAS_FULL3D_RAW_DATA; 2 packet every 4 seconds
			stopreportflow $i_reportflowID_1
			@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58982", *$i_RptRefNb, 360) -- TM(21,3) SID=205 SWA_TM_SCI_PAS_TRIGG_SNAP_RAW_START; 1 packet every 300 seconds
			stopreportflow $i_reportflowID_2
			@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58992", *$i_RptRefNb, 360) -- TM(21,3) SID=206 SWA_TM_SCI_PAS_TRIGG_SNAP_RAW_FIRST; 9 packet every 300 seconds
			stopreportflow $i_reportflowID_3
			@RPZA_CATCHTMPCKT($i_reportFlowID_4, "AB.TM.YIA58993", *$i_RptRefNb, 360) -- TM(21,6) SID=207 SWA_TM_SCI_PAS_TRIGG_SNAP_RAW_DATA; 39 packet every 300 seconds
			stopreportflow $i_reportflowID_4
			@RPZA_CATCHTMPCKT($i_reportFlowID_5, "AB.TM.YIA58729", *$i_RptRefNb) -- TM(21,3) SID=215 SWA_TM_SCI_PAS_MOMENTS_RAW_DATA; 1 packet every 100 seconds
			stopreportflow $i_reportflowID_5
	
			@SU_SEQPHASE2(3, "13.1.14 - Wait 00:02:00 (120 seconds)", *$sNumPha, "",  $sTitle)	
			@su_wait(120)

		end if -- if ($sPAS_HVSafety = "AIRSAFE")
		
		@SU_SEQPHASE2(3, "13.1.15 - Change EAS Cadence to HIGH", *$sNumPha, "",  $sTitle)							

		$i_reportflowID := startreportflow("AB.TM.YIA58727")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58703")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58704")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58713")
		$i_reportflowID_4 := startreportflow("AB.TM.YIA58701")
		$i_reportflowID_5 := startreportflow("AB.TM.YIA58702")
		$i_reportflowID_6 := startreportflow("AB.TM.YIA58711")

		@SU_SEND({ AB.TC.ZIA58728 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60096_:OBV := 0 , \
			PIA60097_:OBV := 0 , \
			PIA60099_:OBV := 1 , \
			PIA60098_:OBV := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)	
		
		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58727", *$i_RptRefNb) -- TM(21,3) SSID=20 SWA_TM_SCI_EAS_PARTIAL_MOMENTS_RAW_DATA; 0 packets  
		stopreportflow $i_reportflowID
		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58703", *$i_RptRefNb) -- TM(21,3) SSID=0 SWA_TM_SCI_EAS1_FULL3D_RAW_HEAD; 1 packet every 10 seconds
		stopreportflow $i_reportflowID_1
		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58704", *$i_RptRefNb) -- TM(21,6) SSID=1 SWA_TM_SCI_EAS1_FULL3D_RAW_DATA; 17 packets every 10 seconds
		stopreportflow $i_reportflowID_2
		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58713", *$i_RptRefNb) -- TM(21,6) SSID=9 SWA_TM_SCI_EAS1_STRAHL_RAW_DATA; 1 packet every 100 seconds  
		stopreportflow $i_reportflowID_3
		@RPZA_CATCHTMPCKT($i_reportFlowID_4, "AB.TM.YIA58701", *$i_RptRefNb) -- TM(21,3) SSID=30 SWA_TM_SCI_EAS2_FULL3D_RAW_HEAD; 1 packet every 100 seconds 
		stopreportflow $i_reportflowID_4 -- v1.23
		@RPZA_CATCHTMPCKT($i_reportFlowID_5, "AB.TM.YIA58702", *$i_RptRefNb) -- TM(21,6) SSID=31 SWA_TM_SCI_EAS2_FULL3D_RAW_DATA; 17 packet every 100 seconds
		stopreportflow $i_reportflowID_5 -- v1.23
		@RPZA_CATCHTMPCKT($i_reportFlowID_6, "AB.TM.YIA58711", *$i_RptRefNb) -- TM(21,6) SSID=39 SWA_TM_SCI_EAS2_STRAHL_RAW_DATA; 1 packet every 100 seconds
		stopreportflow $i_reportflowID_6 -- v1.23
	
	  	@SU_SEQPHASE2(3, "13.1.16 - Wait 00:02:00 (120 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(120)

		@SU_SEQPHASE2(3, "13.1.17 - Change All Sensors Cadence to LOW", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58728 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60096_:OBV := 2 , \
			PIA60097_:OBV := 2 , \
			PIA60099_:OBV := 2 , \
			PIA60098_:OBV := 2 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		$i_reportflowID := startreportflow("AB.TM.YIA58727")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58703")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58704")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58713")
		$i_reportflowID_4 := startreportflow("AB.TM.YIA58701")
		$i_reportflowID_5 := startreportflow("AB.TM.YIA58702")
		$i_reportflowID_6 := startreportflow("AB.TM.YIA58711")
		$i_reportflowID_7 := startreportflow("AB.TM.YIA58800")
		$i_reportflowID_8 := startreportflow("AB.TM.YIA58810")
		$i_reportflowID_9 := startreportflow("AB.TM.YIA58807")
		$i_reportflowID_10 := startreportflow("AB.TM.YIA58804")
		$i_reportflowID_11 := startreportflow("AB.TM.YIA58700")
		$i_reportflowID_12 := startreportflow("AB.TM.YIA58705")
		$i_reportflowID_13 := startreportflow("AB.TM.YIA58982")
		$i_reportflowID_14 := startreportflow("AB.TM.YIA58992")
		$i_reportflowID_15 := startreportflow("AB.TM.YIA58993")
		$i_reportflowID_16 := startreportflow("AB.TM.YIA58729")

		-- EAS1

--		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58727", *$i_RptRefNb) -- TM(21,3) SSID=20 SWA_TM_SCI_EAS_PARTIAL_MOMENTS_RAW_DATA; 1 packet every 4 seconds  
		stopreportflow $i_reportflowID
--		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58703", *$i_RptRefNb, 400) -- TM(21,3) SSID=0 SWA_TM_SCI_EAS1_FULL3D_RAW_HEAD; 1 packet every 400 seconds
		stopreportflow $i_reportflowID_1
--		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58704", *$i_RptRefNb, 400) -- TM(21,6) SSID=1 SWA_TM_SCI_EAS1_FULL3D_RAW_DATA; 17 packets every 400 seconds
		stopreportflow $i_reportflowID_2
--		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58713", *$i_RptRefNb) -- TM(21,6) SSID=9 SWA_TM_SCI_EAS1_STRAHL_RAW_DATA; 1 packet every 100 seconds  
		stopreportflow $i_reportflowID_3
 
		-- EAS2
		
--		@RPZA_CATCHTMPCKT($i_reportFlowID_4, "AB.TM.YIA58701", *$i_RptRefNb) -- TM(21,3) SSID=30 SWA_TM_SCI_EAS2_FULL3D_RAW_HEAD; 1 packet every 100 seconds 
		stopreportflow $i_reportflowID_4
--		@RPZA_CATCHTMPCKT($i_reportFlowID_5, "AB.TM.YIA58702", *$i_RptRefNb) -- TM(21,6) SSID=31 SWA_TM_SCI_EAS2_FULL3D_RAW_DATA; 17 packet every 100 seconds
		stopreportflow $i_reportflowID_5
--		@RPZA_CATCHTMPCKT($i_reportFlowID_6, "AB.TM.YIA58711", *$i_RptRefNb) -- TM(21,6) SSID=39 SWA_TM_SCI_EAS2_STRAHL_RAW_DATA; 1 packet every 100 seconds
		stopreportflow $i_reportflowID_6

		-- HIS
		
--		@RPZA_CATCHTMPCKT($i_reportFlowID_7, "AB.TM.YIA58800", *$i_RptRefNb, 300) -- TM(21,3) SSID=128 SWA_TM_HIS_SCI_CONF_NORM; 1 packet every 300 seconds 
		stopreportflow $i_reportflowID_7
--		@RPZA_CATCHTMPCKT($i_reportFlowID_8, "AB.TM.YIA58810", *$i_RptRefNb, 300) -- TM(21,6) SSID=132 SWA_TM_HIS_SCI_LOW_LATENCY_NORM; 1 packet every 300 seconds
		stopreportflow $i_reportflowID_8
--		@RPZA_CATCHTMPCKT($i_reportFlowID_9, "AB.TM.YIA58807", *$i_RptRefNb, 300) -- TM(21,6) SSID=130 SWA_TM_HIS_SCI_VDF_NORM; 1 packet every 300 seconds
		stopreportflow $i_reportflowID_9
--		@RPZA_CATCHTMPCKT($i_reportFlowID_10, "AB.TM.YIA58804", *$i_RptRefNb, 300) -- TM(21,6) SSID=131 SWA_TM_HIS_SCI_SENS_PRIO_NORM; 2 packets every 300s
		stopreportflow $i_reportflowID_10

		-- PAS
		
--		@RPZA_CATCHTMPCKT($i_reportFlowID_11, "AB.TM.YIA58700", *$i_RptRefNb) -- TM(21,3) SID=192 SWA_TM_SCI_PAS_FULL3D_RAW_HEAD; 1 packet every 16 seconds 
		stopreportflow $i_reportflowID_11
--		@RPZA_CATCHTMPCKT($i_reportFlowID_12, "AB.TM.YIA58705", *$i_RptRefNb) -- TM(21,6) SID=193 SWA_TM_SCI_PAS_FULL3D_RAW_DATA; 2 packet every 16 seconds
		stopreportflow $i_reportflowID_12
--		@RPZA_CATCHTMPCKT($i_reportFlowID_13, "AB.TM.YIA58982", *$i_RptRefNb, 1200) -- TM(21,3) SID=205 SWA_TM_SCI_PAS_TRIGG_SNAP_RAW_START; 1 packet every 1200 seconds
		stopreportflow $i_reportflowID_13
--		@RPZA_CATCHTMPCKT($i_reportFlowID_14, "AB.TM.YIA58992", *$i_RptRefNb, 1200) -- TM(21,3) SID=206 SWA_TM_SCI_PAS_TRIGG_SNAP_RAW_FIRST; 9 packet every 1200 seconds
		stopreportflow $i_reportflowID_14
--		@RPZA_CATCHTMPCKT($i_reportFlowID_15, "AB.TM.YIA58993", *$i_RptRefNb, 1200) -- TM(21,6) SID=207 SWA_TM_SCI_PAS_TRIGG_SNAP_RAW_DATA; 39 packet every 1200 seconds
		stopreportflow $i_reportflowID_15
--		@RPZA_CATCHTMPCKT($i_reportFlowID_16, "AB.TM.YIA58729", *$i_RptRefNb) -- TM(21,3) SID=215 SWA_TM_SCI_PAS_MOMENTS_RAW_DATA; 1 packet every 100 seconds
		stopreportflow $i_reportflowID_16

	  	@SU_SEQPHASE2(3, "13.1.18 - Wait 00:02:00 (120 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(120)

		@SU_SEQPHASE2(3, "13.1.19 - Change Cadence to NOMINAL", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58728 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			FI1_:OBV := 0 , \
			PIA60096_:OBV := 1 , \
			PIA60097_:OBV := 1 , \
			PIA60099_:OBV := 1 , \
			PIA60098_:OBV := 1 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			
	
	  	@SU_SEQPHASE2(3, "13.1.20 - Wait 00:02:00 (120 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(120)

		@SU_SEQPHASE2(3, "13.1.21 - Start Science Packet Compression", *$sNumPha, "",  $sTitle)							
		$i_reportflowID := startreportflow("AB.TM.YIA58727")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58708")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58709")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58712")
		$i_reportflowID_4 := startreportflow("AB.TM.YIA58706")
		$i_reportflowID_5 := startreportflow("AB.TM.YIA58707")
		$i_reportflowID_6 := startreportflow("AB.TM.YIA58710")
		$i_reportflowID_7 := startreportflow("AB.TM.YIA58800")
		$i_reportflowID_8 := startreportflow("AB.TM.YIA58810")
		$i_reportflowID_9 := startreportflow("AB.TM.YIA58807")
		$i_reportflowID_10 := startreportflow("AB.TM.YIA58804")
		$i_reportflowID_11 := startreportflow("AB.TM.YIA58977")
		$i_reportflowID_12 := startreportflow("AB.TM.YIA58978")
		$i_reportflowID_13 := startreportflow("AB.TM.YIA58981")
		$i_reportflowID_14 := startreportflow("AB.TM.YIA58990")
		$i_reportflowID_15 := startreportflow("AB.TM.YIA58991")


		@SU_SEND({ AB.TC.ZIA58716 , \
			SHF:OBV := 0 , \
			SID:OBV := 120}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@SU_SEQPHASE2(3, "13.1.22 - Check Compression (Post Test)", *$sNumPha, "",  $sTitle)							

		-- EAS1

--		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58727", *$i_RptRefNb) -- TM(21,3) SSID=20 SWA_TM_SCI_EAS_PARTIAL_MOMENTS_RAW_DATA
		stopreportflow $i_reportflowID
--		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58708", *$i_RptRefNb) -- TM(21,3) SSID=0 SWA_TM_SCI_EAS1_FULL3D_RAW_HEAD
		stopreportflow $i_reportflowID_1
--		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58709", *$i_RptRefNb) -- TM(21,6) SSID=1 SWA_TM_SCI_EAS1_FULL3D_RAW_DATA
		stopreportflow $i_reportflowID_2
--		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58712", *$i_RptRefNb) -- TM(21,6) SSID=9 SWA_TM_SCI_EAS1_STRAHL_RAW_DATA  
		stopreportflow $i_reportflowID_3
 
		-- EAS2
		
--		@RPZA_CATCHTMPCKT($i_reportFlowID_4, "AB.TM.YIA58706", *$i_RptRefNb) -- TM(21,3) SSID=32 SWA_TM_SCI_EAS2_FULL3D_COMPR_HEADD 
		stopreportflow $i_reportflowID_4
--		@RPZA_CATCHTMPCKT($i_reportFlowID_5, "AB.TM.YIA58707", *$i_RptRefNb) -- TM(21,6) SSID=33 SWA_TM_SCI_EAS2_FULL3D_COMPR_DATA
		stopreportflow $i_reportflowID_5
--		@RPZA_CATCHTMPCKT($i_reportFlowID_6, "AB.TM.YIA58710", *$i_RptRefNb) -- TM(21,6) SSID=38 SWA_TM_SCI_EAS2_STRAHL_COMPR_DATA
		stopreportflow $i_reportflowID_6

		-- HIS
		
--		@RPZA_CATCHTMPCKT($i_reportFlowID_7, "AB.TM.YIA58800", *$i_RptRefNb, 300) -- TM(21,3) SSID=128 SWA_TM_HIS_SCI_CONF_NORM; 1 packet every 300 seconds 
		stopreportflow $i_reportflowID_7
--		@RPZA_CATCHTMPCKT($i_reportFlowID_8, "AB.TM.YIA58810", *$i_RptRefNb, 300) -- TM(21,6) SSID=132 SWA_TM_HIS_SCI_LOW_LATENCY_NORM; 1 packet every 300 seconds
		stopreportflow $i_reportflowID_8
--		@RPZA_CATCHTMPCKT($i_reportFlowID_9, "AB.TM.YIA58807", *$i_RptRefNb, 300) -- TM(21,6) SSID=130 SWA_TM_HIS_SCI_VDF_NORM; 1 packet every 300 seconds
		stopreportflow $i_reportflowID_9
--		@RPZA_CATCHTMPCKT($i_reportFlowID_10, "AB.TM.YIA58804", *$i_RptRefNb, 300) -- TM(21,6) SSID=131 SWA_TM_HIS_SCI_SENS_PRIO_NORM; 2 packets every 300s
		stopreportflow $i_reportflowID_10

		-- PAS
		
--		@RPZA_CATCHTMPCKT($i_reportFlowID_11, "AB.TM.YIA58977", *$i_RptRefNb) -- TM(21,3) SID=194 SWA_TM_SCI_PAS_FULL3D_COMPR_HEAD 
		stopreportflow $i_reportflowID_11
--		@RPZA_CATCHTMPCKT($i_reportFlowID_12, "AB.TM.YIA58978", *$i_RptRefNb) -- TM(21,6) SID=195 SWA_TM_SCI_PAS_FULL3D_COMPR_DATA
		stopreportflow $i_reportflowID_12
--		@RPZA_CATCHTMPCKT($i_reportFlowID_13, "AB.TM.YIA58981", *$i_RptRefNb, 1200) -- TM(21,3) SID=202 SWA_TM_SCI_PAS_TRIGG_SNAP_COMPR_START
		stopreportflow $i_reportflowID_13
--		@RPZA_CATCHTMPCKT($i_reportFlowID_14, "AB.TM.YIA58990", *$i_RptRefNb, 1200) -- TM(21,3) SID=203 SWA_TM_SCI_PAS_TRIGG_SNAP_COMPR_FIRST
		stopreportflow $i_reportflowID_14
--		@RPZA_CATCHTMPCKT($i_reportFlowID_15, "AB.TM.YIA58991", *$i_RptRefNb, 1200) -- TM(21,6) SID=204 SWA_TM_SCI_PAS_TRIGG_SNAP_COMPR_DATA
		stopreportflow $i_reportflowID_15

	  	@SU_SEQPHASE2(3, "13.1.23 - Wait 00:02:00 (120 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(120)

		@SU_SEQPHASE2(3, "13.1.24 - Stop Science Packet Compression", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58717 , \
			SHF:OBV := 0 , \
			SID:OBV := 120}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			
	
	  	@SU_SEQPHASE2(3, "13.1.25 - Wait 00:02:00 (120 seconds)", *$sNumPha, "",  $sTitle)	
		@su_wait(120)

		-- All sensors must have been in Science mode for at least 5 minutes before next section.

		**********************************************************************************				
		@SU_SEQPHASE2(2, "14	Trigger & Burst Mode Test ", *$sNumPha, "",  $sTitle)
		**********************************************************************************	


		-- Step N°	FFT Commanding Flow	Checks and PASS/FAIL Criteria
		-- Test the SWA Trigger mode response. This MUST only be done after 5 minutes of Normal Mode 

		@SU_SEQPHASE2(3, "14.1.1 - Enable RPW mode ", *$sNumPha, "",  $sTitle)							
		$i_reportflowID := startreportflow("AB.TM.YIA58717")
		$i_reportflowID_1 := startreportflow("AB.TM.YIA58715")
		$i_reportflowID_2 := startreportflow("AB.TM.YIA58451")
		$i_reportflowID_3 := startreportflow("AB.TM.YIA58721")
		$i_reportflowID_4 := startreportflow("AB.TM.YIA58719")
		$i_reportflowID_5 := startreportflow("AB.TM.YIA58725")
		$i_reportflowID_6 := startreportflow("AB.TM.YIA58723")

		@SU_SEND({ AB.TC.ZIA58718 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60847_ := 0 , \
			PIA60858_ := "DISABLE" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			


--		@SU_SEQPHASE2(3, "14.1.2 - Enable Trigger mode using Data Source Function to set the SMB1_FLAG.", *$sNumPha, "",  $sTitle)							

-- don't know how to do this.

-- SPWFEtc20modifyDataByte, AByteNumber, 148 ; 
-- SPWFEtc20modifyDataByte, NewValue, 64

--	  	@SU_SEQPHASE2(3, "Wait 00:18:00 (18 minutes) for the last of the Triggered mode data to arrive", *$sNumPha, "",  $sTitle)	
--		@su_wait(1080)

--		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58717", *$i_RptRefNb, 1200) -- TM(21,3) SSID=10 SWA_TM_SCI_EAS1_TRIGG_RAW_START
		stopreportflow $i_reportflowID
--		@RPZA_CATCHTMPCKT($i_reportFlowID_1, "AB.TM.YIA58715", *$i_RptRefNb, 1200) -- TM(21,3) SSID=40 SWA_TM_SCI_EAS2_TRIGG_RAW_START
		stopreportflow $i_reportflowID_1
--		@RPZA_CATCHTMPCKT($i_reportFlowID_2, "AB.TM.YIA58451", *$i_RptRefNb, 1200) -- TM(5,1) SWA_E_RPW_TRIGGER_OCCURRED
		stopreportflow $i_reportflowID_2
--		@RPZA_CATCHTMPCKT($i_reportFlowID_3, "AB.TM.YIA58721", *$i_RptRefNb, 1200) -- TM(21,3) SSID=11 SWA_TM_SCI_EAS1_TRIGG_RAW_FIRST
		stopreportflow $i_reportflowID_3
--		@RPZA_CATCHTMPCKT($i_reportFlowID_4, "AB.TM.YIA58719", *$i_RptRefNb, 1200) -- TM(21,3) SSID=41 SWA_TM_SCI_EAS2_TRIGG_RAW_FIRST
		stopreportflow $i_reportflowID_4
--		@RPZA_CATCHTMPCKT($i_reportFlowID_5, "AB.TM.YIA58725", *$i_RptRefNb, 1200) -- TM(21,6) SSID=12 SWA_TM_SCI_EAS1_TRIGG_RAW_DATA
		stopreportflow $i_reportflowID_5
--		@RPZA_CATCHTMPCKT($i_reportFlowID_6, "AB.TM.YIA58723", *$i_RptRefNb, 1200) -- TM(21,6) SSID=42 SWA_TM_SCI_EAS2_TRIGG_RAW_DATA
		stopreportflow $i_reportflowID_6 

--		@SU_SEQPHASE2(3, "Test the SWA burst mode response", *$sNumPha, "",  $sTitle)							

--		@SU_SEQPHASE2(3, "14.1.3 - Change the mag angle in the S20 packet using the DataSource Function", *$sNumPha, "",  $sTitle)							

-- don't know how to do this.

--SPWFEtc20modifyDataByte,94,127 ; Primary X comp?
--SPWFEtc20modifyDataByte,95,254 ; Primary X comp?
--SPWFEtc20modifyDataByte,96,128 ; Primary Y comp?
--SPWFEtc20modifyDataByte,97,19 ; Primary Y comp?
--SPWFEtc20modifyDataByte,98,127 ; Primary Z comp?
--SPWFEtc20modifyDataByte,99,235 ; Primary Z comp?	

	
--	  	@SU_SEQPHASE2(3, "14.1.4 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
--		@su_wait(1)

		@SU_SEQPHASE2(3, "14.1.5 - Go to HVSTDBY mode", *$sNumPha, "",  $sTitle)							
 
		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

	  	@SU_SEQPHASE2(3, "14.1.6 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		@SU_SEQPHASE2(3, "14.1.7 - Configure no HV sweeping (static output only)", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_ANALYZER" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

	  	@SU_SEQPHASE2(3, "14.1.8 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		@SU_SEQPHASE2(3, "14.1.9 - Configure the top deflector", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_DFL" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

	  	@SU_SEQPHASE2(3, "14.1.10 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		@SU_SEQPHASE2(3, "14.1.11 - Configure the bottom deflector", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_BOT_DFL" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

	  	@SU_SEQPHASE2(3, "14.1.12 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		@SU_SEQPHASE2(3, "14.1.13 - Configure the top plate", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58919 , \
				SHF:OBV := 0 , \
				SID:OBV := 120 , \
				PIA60356_ := "SW_EN_TOP_PLATE" , \
				PIA60352_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

	  	@SU_SEQPHASE2(3, "14.1.14 - Wait 00:00:01 (1 second)", *$sNumPha, "",  $sTitle)	
		@su_wait(1)

		@SU_SEQPHASE2(3, "14.1.15 - Go to HIS Pre-Burst mode ", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "PRE_BURST"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			
	
	  	@SU_SEQPHASE2(3, "14.1.16 - *WAIT*, 0:00:30, From previous command", *$sNumPha, "",  $sTitle)	
		@su_wait(30)

		@SU_SEQPHASE2(3, "14.1.17 - Enter all sensors into Burst Mode for 5 minutes", *$sNumPha, "",  $sTitle)							
		$i_reportflowID := startreportflow("AB.TM.YIA58726")

		@SU_SEND({ AB.TC.ZIA58726 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60157_ := 2480 , \
			PIA60158_ := 0 , \
			PIA60159_ := 2480 , \
			PIA60160_ := 0 , \
			PIA60163_ := 2480 , \
			PIA60164_ := 0 , \
			PIA60170_ := "DYNAMIC" , \
			PIA60161_ := 2480 , \
			PIA60162_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

--		@SU_SEQPHASE2(3, "14.1.18 - Check reception of at least one of:", *$sNumPha, "",  $sTitle)							

--		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58726", *$i_RptRefNb) -- (21,6) SSID=4 SWA_TM_SCI_EAS1_BURST_COMPR_DATA
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00451","=1","=1")
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00452","=8","=8")
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00454","=32766","=32766")
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00455","=32787","=32787")
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00456","=32747","=32747")
	
--		@SU_SEQPHASE2(3, "14.1.19 - Change the mag angle in the S20 packet using the DataSource Function", *$sNumPha, "",  $sTitle)							

-- don't know how to do this.

--SPWFEtc20modifyDataByte,94,127 ; Primary X comp?
--SPWFEtc20modifyDataByte,95,240 ; Primary X comp?
--SPWFEtc20modifyDataByte,96,127 ; Primary Y comp?
--SPWFEtc20modifyDataByte,97,239 ; Primary Y comp?
--SPWFEtc20modifyDataByte,98,128 ; Primary Z comp?
--SPWFEtc20modifyDataByte,99,002 ; Primary Z comp?	

--		@SU_SEQPHASE2(3, "14.1.20 - After 10 seconds Parameter to be checked ", *$sNumPha, "",  $sTitle)							

--		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58726", *$i_RptRefNb) -- (21,6) SSID=4 SWA_TM_SCI_EAS1_BURST_COMPR_DATA
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00451","=0","=0")
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00452","=0","=0")
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00454","=32752","=32752")
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00455","=32751","=32751")
--		@SU_IPVRC($i_RptRefNb,"AB.TM.YIA58726.NIA00456","=32770","=32770")
	
--		@SU_SEQPHASE2(3, "14.1.21 - Check reception of at least one of:", *$sNumPha, "",  $sTitle)							

--		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58726", *$i_RptRefNb) -- (21,6) SSID=4 SWA_TM_SCI_EAS1_BURST_COMPR_DATA	
		stopreportflow $i_reportflowID
	
	  	@SU_SEQPHASE2(3, "14.1.22 - *WAIT*, 00:12:00, From previous command for all the BM packets to clear", *$sNumPha, "",  $sTitle)	
		@su_wait(720) -- v1.28 extended delay to ensure PAS data has completed

		@SU_SEQPHASE2(3, "14.1.23 - Disable SWA IIC Test mode", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58709 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60744_ := "OFF" }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		**********************************************************************************				
		@SU_SEQPHASE2(2, "15	All Sensors to No Science", *$sNumPha, "",  $sTitle)
		**********************************************************************************	
		

		-- Step N°	FFT Commanding Flow	Checks and PASS/FAIL Criteria

		@SU_SEQPHASE2(3, "15.1.1 - Put HIS into standby mode ", *$sNumPha, "",  $sTitle)							
		$i_reportflowID := startreportflow("AB.TM.YIA58602")

		@SU_SEND({ AB.TC.ZIA58917 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA59011_ := "HVSTDBY"}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@RPZA_CATCHTMPCKT($i_reportFlowID, "AB.TM.YIA58602", *$i_RptRefNb) -- (5,1) SID=43802 SWA_E_HIS_MODE_CHANGE	
		stopreportflow $i_reportflowID  

		@SU_SEQPHASE2(3, "15.1.2 - Put PAS into no science mode ", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58944 , \
			SHF:OBV := 0 , \
			SID:OBV := 120}, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@SU_SEQPHASE2(3, "15.1.3 - Put EAS1 into no science mode ", *$sNumPha, "",  $sTitle)							

		@SU_SEND({ AB.TC.ZIA58771 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		@SU_SEQPHASE2(3, "15.1.4 - Put EAS2 into no science mode", *$sNumPha, "",  $sTitle)							
 
		@SU_SEND({ AB.TC.ZIA58819 , \
			SHF:OBV := 0 , \
			SID:OBV := 120 , \
			PIA60031_ := "MBOX1" , \
			PIA60446_ := 0 , \
			PIA60447_ := 0 , \
			PIA60448_ := 0 }, $s_Trace, VER := "ACK_EXEC", TIMEOUT_VER := 60)			

		**********************************************************************************				
		@SU_SEQPHASE2(2, "16	Power down sensors", *$sNumPha, "",  $sTitle)
		**********************************************************************************	

		call TISS_HIS_OFF
		call TISS_PAS_OFF, $sPAS_HVSafety
		call TISS_EAS_OFF, "1"
		call TISS_EAS_OFF, "2"
		
		CALL TISC_SWA_OFF

		@su_seqend("SWA FFT Completed", $dCurDate, "TRACE")
		return $Rstat
		
END SEQUENCE