*** File Information *** 

For descriptor: swa-eas-padc 

Filename: data/user/SolO/swa/L1/2023/solo_L1_swa-eas-padc_20230430T162732-20230430T164231_V01.cdf 

Variables: ['EPOCH', 'SCET', 'SWA_EAS_BM_Data', 'SWA_EAS_ELEVATION', 'SWA_EAS_ELEVATION_delta_upper', 'SWA_EAS_ELEVATION_delta_lower', 'SWA_EAS_AZIMUTH', 'SWA_EAS_AZIMUTH_delta_upper', 'SWA_EAS_AZIMUTH_delta_lower', 'SWA_EAS_ENERGY', 'SWA_EAS_ENERGY_delta_upper', 'SWA_EAS_ENERGY_delta_lower', 'SWA_EAS_Mode', 'SWA_EAS_Validity', 'SWA_EAS_EasUsed', 'SWA_EAS_ElevationUsed', 'SWA_EAS_MagDataUsed', 'SWA_EAS_MagDataValidity', 'EAS_TO_SRF', 'EAS_TO_MAG', 'QUALITY_FLAG', 'QUALITY_BITMASK'] 

*** Mandatory Variables *** 

QUALITY_FLAG
OK
QUALITY_BITMASK
OK
SCET
OK

 *** Mandatory Global Attributes *** 


Project is ['Solar Orbiter', 'Solar Orbiter']
From dict, it should be: 'SOLO>Solar Orbiter'


Source_name is ['SOLO>Solar Orbiter']
From dict, it should be: 'SOLO>Solar Orbiter'


Discipline is ['Space Physics>Interplanetary Studies']
From dict, it should be: 'Space Physics>Interplanetary Studies'


Data_type is ['L1>Level 1 Obnoard PAD counts Data']
From dict, it should be: 'L1>Level 1 Data'


Descriptor is ['SWA-EAS-padc']
From dict, it should be: 'SWA-EAS-PADC>Solar Wind Analyser, , etc'


Instrument is ['SWA-EAS>Solar Wind Analyser-Electron Analyser System']
From dict, it should be: 'SWA-EAS>Solar Wind Analyser '


Data_version is ['01']
From dict, it should be: '01'


Software_version is ['02.00.00']


PI_name is ['C. J. Owen']


PI_affiliation is ['MSSL-UCL, University College London, UK']


TEXT is ['https://doi.org/10.1051/0004-6361/201937259']


Instrument_type is ['Plasma and Solar Wind']


Mission_group is ['Solar Orbiter']
From dict, it should be: 'Solar Orbiter'


Logical_source is ['solo_L1_swa-eas-padc']
From dict, it should be: 'solo_L1_swa-eas-padc'


Logical_file_id is ['solo_L1_swa-eas-padc_20230430T162732-20230430T164231_V01']
From dict, it should be: 'solo_L1_swa-eas-padc_20230430T162732-20230430T164231_V01'


Logical_source_description is ['SWA-EAS Pitch Angle Counts data']
From dict, it should be: 'Solar Orbiter, Level 1, Solar Wind Analyser, , etc '


Rules_of_use is ['Consult with MSSL-UCL before using']


Generated_by is ['MSSL-UCL']


Generation_date is ['2023-07-27T06:23:24Z']


Acknowledgement is ["Solar Orbiter is a space mission of international collaboration between ESA and NASA, operated by ESA. Solar Orbiter Solar Wind Analyser (SWA) data are derived from scientific sensors which have been designed and created, and are operated under funding provided in numerous contracts from the UK Space Agency (UKSA), the UK Science and Technology Facilities Council (STFC), the Agenzia Spaziale Italiana (ASI), the Centre National d'etudes Spatiales (CNES, France), the Centre National de la Recherche Scientifique (CNRS, France), the Czech contribution to the ESA PRODEX programme and NASA."]


MODS is ['V01']


ALERT: Keyword 'Parents' NOT FOUND


ALERT: Keyword 'TARGET_NAME' NOT FOUND


ALERT: Keyword 'TARGET_CLASS' NOT FOUND


ALERT: Keyword 'TARGET_REGION' NOT FOUND


ALERT: Keyword 'TIME_MIN' NOT FOUND
Start time from filename: 20230430T162732
Start time from epoch variable: 2023-04-30T16:27:32.000000000


ALERT: Keyword 'TIME_MAX' NOT FOUND
End time from filename: 20230430T164231
End time from epoch variable: 2023-04-30T16:42:31.875000000


ALERT: Keyword 'Data_product' NOT FOUND
From dict, it should be: 'padc>[description of dataset]'


SOOP_NAME is ['none']
From dict, it should be: 'none'


SOOP_TYPE is ['none']
From dict, it should be: 'none'


OBS_ID is ['SSWA_110A_000_000_rhHt_117']
From dict, it should be: 'if not applicable, then none'


ALERT: Keyword 'LEVEL' NOT FOUND
From dict, it should be: 'L1>Level 1 Data'



 *** Mandatory Variable Attributes *** 

Variable: EPOCH
{'FIELDNAM': 'EPOCH', 'CATDESC': 'Epoch in nano-seconds since J2000, encoded as terrestrial time on rotating Earth Geoid', 'DISPLAY_TYPE': 'time_series', 'FILLVAL': -9223372036854775808, 'FORMAT': 'I20', 'LABLAXIS': 'EAS EPOCH', 'UNITS': 'ns', 'VALIDMIN': 631108869174000000, 'VALIDMAX': 1262260869000000000, 'SCALEMIN': 736144121199963264, 'SCALEMAX': 736145020201713152, 'SCALETYP': 'linear', 'VAR_TYPE': 'support_data', 'VAR_NOTES': 'The EAS time tag is from the center of the acquisition interval which is 125 ms', 'SI_CONVERSION': '1.0E-9>s'}
VDRInfo(Variable='EPOCH', Num=0, Var_Type='zVariable', Data_Type=33, Data_Type_Description='CDF_TIME_TT2000', Num_Elements=1, Num_Dims=0, Dim_Sizes=[], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[], Compress=0, Pad=array([-9223372036854775807]), Block_Factor=0)

UNITS = ns


Variable: SCET
{'FIELDNAM': 'SCET', 'CATDESC': 'Elapsed time of the onboard clock at the time of EAS observation.', 'DISPLAY_TYPE': 'time_series', 'FILLVAL': -1e+31, 'FORMAT': 'f14.5', 'LABLAXIS': 'Spacecraft Elapsed Time', 'UNITS': 'ticks', 'VALIDMIN': 0.0, 'VALIDMAX': 4294967295.999, 'SCALEMIN': 0.0, 'SCALEMAX': 4294967295.999, 'SCALETYP': 'linear', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SCET', Num=1, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=0, Dim_Sizes=[], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SCET
UNITS = ticks
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: SWA_EAS_BM_Data
{'FIELDNAM': 'EAS Burst Mode Counts', 'CATDESC': 'Onboard selected pitch angle distribution', 'DISPLAY_TYPE': 'spectrogram', 'FILLVAL': 4294967295, 'FORMAT': 'I10', 'LABLAXIS': 'Electron Counts', 'UNITS': 'Total Counts', 'VALIDMIN': 0, 'VALIDMAX': 65535, 'SCALEMIN': 0, 'SCALEMAX': 65535, 'SCALETYP': 'log', 'DEPEND_0': 'EPOCH', 'DEPEND_1': 'SWA_EAS_ELEVATION', 'DEPEND_2': 'SWA_EAS_ENERGY', 'DEPEND_3': 'SWA_EAS_AZIMUTH', 'COORDINATE_SYSTEM': 'SOLO_SWA_EASx-SCI', 'VAR_TYPE': 'data'}
VDRInfo(Variable='SWA_EAS_BM_Data', Num=2, Var_Type='zVariable', Data_Type=14, Data_Type_Description='CDF_UINT4', Num_Elements=1, Num_Dims=3, Dim_Sizes=[2, 64, 32], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1, -1, -1], Compress=0, Pad=array([4294967294], dtype=uint32), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_BM_Data
UNITS = Total Counts
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: SWA_EAS_ELEVATION
{'FIELDNAM': 'EAS Elevation', 'CATDESC': 'The elevation angles (instrument look directions) of the EAS sensor bin centres', 'FILLVAL': -1e+31, 'FORMAT': 'f14.4', 'LABLAXIS': 'Elevation Angle', 'UNITS': 'Degrees', 'VALIDMIN': -45.0, 'VALIDMAX': 45.0, 'SCALEMIN': -45.0, 'SCALEMAX': 45.0, 'SCALETYP': 'linear', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_ELEVATION', Num=3, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[2], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_ELEVATION
UNITS = Degrees
Remember that the SI unit of angle is the radian.
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: SWA_EAS_ELEVATION_delta_upper
{'FIELDNAM': 'EAS Elevation delta upper', 'CATDESC': 'Upper half width of elevation bin', 'FILLVAL': -1e+31, 'FORMAT': 'f14.4', 'UNITS': 'Degrees', 'VALIDMIN': 0.0, 'VALIDMAX': 12.0, 'SCALEMIN': 0.0, 'SCALEMAX': 12.0, 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_ELEVATION_delta_upper', Num=4, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[2], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_ELEVATION_delta_upper
UNITS = Degrees
Remember that the SI unit of angle is the radian.
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")
VAR_TYPE is data or support_data, but SCALE keywords missing
LABEL keywords missing


Variable: SWA_EAS_ELEVATION_delta_lower
{'FIELDNAM': 'EAS Elevation delta lower', 'CATDESC': 'Lower half width of elevation bin', 'FILLVAL': -1e+31, 'FORMAT': 'f14.4', 'UNITS': 'Degrees', 'VALIDMIN': 0.0, 'VALIDMAX': 12.0, 'SCALEMIN': 0.0, 'SCALEMAX': 12.0, 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_ELEVATION_delta_lower', Num=5, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[2], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_ELEVATION_delta_lower
UNITS = Degrees
Remember that the SI unit of angle is the radian.
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")
VAR_TYPE is data or support_data, but SCALE keywords missing
LABEL keywords missing


Variable: SWA_EAS_AZIMUTH
{'FIELDNAM': 'EAS Azimuth', 'CATDESC': 'The azimuth angles (electron flow direction) of the EAS sensor bin centres', 'FILLVAL': -1e+31, 'FORMAT': 'f14.4', 'LABLAXIS': 'Azimuth Angle', 'UNITS': 'Degrees', 'VALIDMIN': 0.0, 'VALIDMAX': 360.0, 'SCALEMIN': 0.0, 'SCALEMAX': 360.0, 'SCALETYP': 'linear', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_AZIMUTH', Num=6, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[32], Sparse='No_sparse', Last_Rec=0, Rec_Vary=False, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_AZIMUTH
UNITS = Degrees
Remember that the SI unit of angle is the radian.
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: SWA_EAS_AZIMUTH_delta_upper
{'FIELDNAM': 'EAS Azimuth upper delta', 'CATDESC': 'Upper half width of azimuth bin', 'FORMAT': 'f14.3', 'UNITS': 'Degrees', 'VALIDMIN': 0.0, 'VALIDMAX': 12.0, 'SCALEMIN': 0.0, 'SCALEMAX': 12.0, 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_AZIMUTH_delta_upper', Num=7, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[32], Sparse='No_sparse', Last_Rec=0, Rec_Vary=False, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_AZIMUTH_delta_upper
UNITS = Degrees
Remember that the SI unit of angle is the radian.
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")
VAR_TYPE is data or support_data, but SCALE keywords missing
LABEL keywords missing


Variable: SWA_EAS_AZIMUTH_delta_lower
{'FIELDNAM': 'EAS Azimuth lower delta', 'CATDESC': 'Lower half width of azimuth bin', 'FORMAT': 'f14.3', 'UNITS': 'Degrees', 'VALIDMIN': 0.0, 'VALIDMAX': 12.0, 'SCALEMIN': 0.0, 'SCALEMAX': 12.0, 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_AZIMUTH_delta_lower', Num=8, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[32], Sparse='No_sparse', Last_Rec=0, Rec_Vary=False, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_AZIMUTH_delta_lower
UNITS = Degrees
Remember that the SI unit of angle is the radian.
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")
VAR_TYPE is data or support_data, but SCALE keywords missing
LABEL keywords missing


Variable: SWA_EAS_ENERGY
{'FIELDNAM': 'EAS Energy', 'CATDESC': 'The representative centre energy for the accumulation bin', 'FILLVAL': -1e+31, 'FORMAT': 'f14.4', 'LABLAXIS': 'Energy', 'UNITS': 'ElectronVolts', 'VALIDMIN': 0.1, 'VALIDMAX': 6000.0, 'SCALEMIN': 0.1, 'SCALEMAX': 6000.0, 'SCALETYP': 'log', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data', 'SI_CONVERSION': '1.60217646E-19>J'}
VDRInfo(Variable='SWA_EAS_ENERGY', Num=9, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[64], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_ENERGY
UNITS = ElectronVolts
Units are currently given as ElectronVolts but 'eV' would be preferred.


Variable: SWA_EAS_ENERGY_delta_upper
{'FIELDNAM': 'EAS Energy upper delta', 'CATDESC': 'Upper half width of energy bin', 'FILLVAL': -1e+31, 'FORMAT': 'f14.4', 'UNITS': 'ElectronVolts', 'VALIDMIN': 0.0, 'VALIDMAX': 1000.0, 'SCALEMIN': 0.0, 'SCALEMAX': 1000.0, 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_ENERGY_delta_upper', Num=10, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[64], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_ENERGY_delta_upper
UNITS = ElectronVolts
Units are currently given as ElectronVolts but 'eV' would be preferred.
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")
VAR_TYPE is data or support_data, but SCALE keywords missing
LABEL keywords missing


Variable: SWA_EAS_ENERGY_delta_lower
{'FIELDNAM': 'EAS Energy lower delta', 'CATDESC': 'Lower half width of energy bin', 'FILLVAL': -1e+31, 'FORMAT': 'f14.4', 'UNITS': 'ElectronVolts', 'VALIDMIN': 0.0, 'VALIDMAX': 1000.0, 'SCALEMIN': 0.0, 'SCALEMAX': 1000.0, 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_ENERGY_delta_lower', Num=11, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[64], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_ENERGY_delta_lower
UNITS = ElectronVolts
Units are currently given as ElectronVolts but 'eV' would be preferred.
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")
VAR_TYPE is data or support_data, but SCALE keywords missing
LABEL keywords missing


Variable: SWA_EAS_Mode
{'FIELDNAM': 'SWA-EAS_Mode', 'CATDESC': 'The EAS Mode bytes received at EAS_SCET time', 'FILLVAL': 4294967295, 'FORMAT': 'I7', 'LABLAXIS': 'EAS Mode', 'UNITS': 'None', 'VALIDMIN': 0, 'VALIDMAX': 65535, 'SCALEMIN': 0, 'SCALEMAX': 65535, 'SCALETYP': 'linear', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_Mode', Num=12, Var_Type='zVariable', Data_Type=14, Data_Type_Description='CDF_UINT4', Num_Elements=1, Num_Dims=1, Dim_Sizes=[3], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([4294967294], dtype=uint32), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_Mode
UNITS = None
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: SWA_EAS_Validity
{'FIELDNAM': 'Validity flags', 'CATDESC': 'The validity flags associated to energies', 'FILLVAL': 4294967295, 'FORMAT': 'I7', 'LABLAXIS': 'Validity Flags', 'UNITS': 'None', 'VALIDMIN': 0, 'VALIDMAX': 65535, 'SCALEMIN': 0, 'SCALEMAX': 65535, 'SCALETYP': 'linear', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_Validity', Num=13, Var_Type='zVariable', Data_Type=14, Data_Type_Description='CDF_UINT4', Num_Elements=1, Num_Dims=1, Dim_Sizes=[9], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([4294967294], dtype=uint32), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_Validity
UNITS = None
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: SWA_EAS_EasUsed
{'FIELDNAM': 'EAS sensor used', 'CATDESC': 'The EAS sensor used for Burst data collection', 'FILLVAL': 4294967295, 'FORMAT': 'I7', 'LABLAXIS': 'EAS Sensor used', 'UNITS': 'None', 'VALIDMIN': 0, 'VALIDMAX': 2, 'SCALEMIN': 0, 'SCALEMAX': 2, 'SCALETYP': 'linear', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_EasUsed', Num=14, Var_Type='zVariable', Data_Type=14, Data_Type_Description='CDF_UINT4', Num_Elements=1, Num_Dims=0, Dim_Sizes=[], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[], Compress=0, Pad=array([4294967294], dtype=uint32), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_EasUsed
UNITS = None
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: SWA_EAS_ElevationUsed
{'FIELDNAM': 'EAS Elevation Used', 'CATDESC': 'The EAS Elevation used for Burst data collection', 'DISPLAY_TYPE': 'time_series', 'FILLVAL': 4294967295, 'FORMAT': 'I7', 'LABLAXIS': 'Elevation used', 'UNITS': 'None', 'VALIDMIN': 0, 'VALIDMAX': 16, 'SCALEMIN': 0, 'SCALEMAX': 16, 'SCALETYP': 'linear', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_ElevationUsed', Num=15, Var_Type='zVariable', Data_Type=14, Data_Type_Description='CDF_UINT4', Num_Elements=1, Num_Dims=1, Dim_Sizes=[2], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([4294967294], dtype=uint32), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_ElevationUsed
UNITS = None
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: SWA_EAS_MagDataUsed
{'FIELDNAM': 'MAG unit vector', 'CATDESC': 'The MAG unit vector used onboard to calculate pitch angle', 'DISPLAY_TYPE': 'time_series', 'FILLVAL': -1e+31, 'FORMAT': 'f14.3', 'LABLAXIS': 'Mag vector', 'UNITS': ' ', 'VALIDMIN': -1.0, 'VALIDMAX': 1.0, 'SCALEMIN': -1.0, 'SCALEMAX': 1.0, 'SCALETYP': 'linear', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'data'}
VDRInfo(Variable='SWA_EAS_MagDataUsed', Num=16, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=1, Dim_Sizes=[3], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_MagDataUsed
UNITS =  
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: SWA_EAS_MagDataValidity
{'FIELDNAM': 'MAG data validity', 'CATDESC': 'Validity of MAG vector received (0 = valid, 1 = not valid)', 'FILLVAL': 4294967295, 'FORMAT': 'I1', 'UNITS': ' ', 'VALIDMIN': 0, 'VALIDMAX': 65535, 'SCALEMIN': 0, 'SCALEMAX': 65535, 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='SWA_EAS_MagDataValidity', Num=17, Var_Type='zVariable', Data_Type=14, Data_Type_Description='CDF_UINT4', Num_Elements=1, Num_Dims=0, Dim_Sizes=[], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[], Compress=0, Pad=array([4294967294], dtype=uint32), Block_Factor=0)

VAR_NOTES not found in variable attributes for SWA_EAS_MagDataValidity
UNITS =  
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")
VAR_TYPE is data or support_data, but SCALE keywords missing
LABEL keywords missing


Variable: EAS_TO_SRF
{'FIELDNAM': 'EAS-SRF Rotation matrix', 'CATDESC': 'SOLO_SWA_EASx-SCI to SOLO_SRF rotation matrix', 'FILLVAL': -1e+31, 'FORMAT': 'f14.6', 'UNITS': ' ', 'VALIDMIN': -1.0, 'VALIDMAX': 1.0, 'SCALEMIN': -1.0, 'SCALEMAX': 1.0, 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='EAS_TO_SRF', Num=18, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=2, Dim_Sizes=[3, 3], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1, -1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for EAS_TO_SRF
UNITS =  
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")
VAR_TYPE is data or support_data, but SCALE keywords missing
LABEL keywords missing


Variable: EAS_TO_MAG
{'FIELDNAM': 'EAS-MAG Rotation matrix', 'CATDESC': 'SOLO_SWA_EASx-SCI to SOLO_MAG Rotation matrix', 'FILLVAL': -1e+31, 'FORMAT': 'f14.6', 'UNITS': ' ', 'VALIDMIN': -1.0, 'VALIDMAX': 1.0, 'SCALEMIN': -1.0, 'SCALEMAX': 1.0, 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='EAS_TO_MAG', Num=19, Var_Type='zVariable', Data_Type=22, Data_Type_Description='CDF_REAL8', Num_Elements=1, Num_Dims=2, Dim_Sizes=[3, 3], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[-1, -1], Compress=0, Pad=array([-1.e+30]), Block_Factor=0)

VAR_NOTES not found in variable attributes for EAS_TO_MAG
UNITS =  
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")
VAR_TYPE is data or support_data, but SCALE keywords missing
LABEL keywords missing


Variable: QUALITY_FLAG
{'FIELDNAM': 'EAS Data Quality', 'CATDESC': 'EAS Data Quality flag', 'DISPLAY_TYPE': 'time_series', 'FILLVAL': 255, 'FORMAT': 'I3', 'LABLAXIS': 'EAS data quality', 'UNITS': ' ', 'VALIDMIN': 0, 'VALIDMAX': 4, 'SCALEMIN': 0, 'SCALEMAX': 4, 'SCALETYP': 'linear', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data'}
VDRInfo(Variable='QUALITY_FLAG', Num=20, Var_Type='zVariable', Data_Type=11, Data_Type_Description='CDF_UINT1', Num_Elements=1, Num_Dims=0, Dim_Sizes=[], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[], Compress=0, Pad=array([254], dtype=uint8), Block_Factor=0)

VAR_NOTES not found in variable attributes for QUALITY_FLAG
UNITS =  
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")


Variable: QUALITY_BITMASK
{'FIELDNAM': 'Quality bitmask', 'CATDESC': 'Detailed information about EAS data quality', 'DISPLAY_TYPE': 'time_series', 'FILLVAL': 65535, 'FORMAT': 'I5', 'LABLAXIS': 'Quality bitmask', 'UNITS': ' ', 'VALIDMIN': 0, 'VALIDMAX': 4, 'SCALEMIN': 0, 'SCALEMAX': 4, 'SCALETYP': 'linear', 'DEPEND_0': 'EPOCH', 'VAR_TYPE': 'support_data', 'VAR_NOTES': 'This bitwise variable is used to indicate EAS data quality in detail. Details not finalized yet.'}
VDRInfo(Variable='QUALITY_BITMASK', Num=21, Var_Type='zVariable', Data_Type=12, Data_Type_Description='CDF_UINT2', Num_Elements=1, Num_Dims=0, Dim_Sizes=[], Sparse='No_sparse', Last_Rec=7199, Rec_Vary=True, Dim_Vary=[], Compress=0, Pad=array([65534], dtype=uint16), Block_Factor=0)

UNITS =  
If no units, then "unitless"
SI_CONVERSION should be present even if there are no units (1>unitless), e.g., 1.0E-9>s for Epoch where UNITS=ns, and if already in SI: e.g., "1.0>s")