URL = https://mssl.ucl.ac.uk/missions/SolO/Webpages/weekly_ops_plans/SWA-operations-plan-for-LTP14-STP300-v01_early.html Start of STP300 is 2024-03-11T00:00:00Z DT = 2024-03-11T00:00:00.000 763430400.00 seconds since 2000-01-01 SCET = 1/0763430178:49169 763430178.75 SCET 221.25 seconds drift SCET DRIFT = 221.24974060058594 -------------------------------------------------------------------------------- 2024-03-11T00:05:00 WOL_start -------------------------------------------------------------------------------- 2024-03-11T03:05:00 WOL_end -------------------------------------------------------------------------------- 2024-03-11T04:05:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2024-03-11T04:05:08 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x01) offset_100 = 87 => OK (no check) -------------------------------------------------------------------------------- 2024-03-11T04:05:12 AIAF135A Configure_PAS_FS (0x00, 0x0A, 0x40, 0x00, 0x09, 0x01) -------------------------------------------------------------------------------- 2024-03-11T04:05:16 AIAF069A Configure_PAS_BM (0x00, 0x04, 0x5A, 0x00, 0x09, 0x24, 0x05, 0x04) -------------------------------------------------------------------------------- 2024-03-11T04:05:20 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2024-03-11T04:24:20 -------------------------------------------------------------------------------- 2024-03-11T04:27:20 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2024-03-11T04:28:40 AIAF100B Sensor_cadence (USE_EAS1_R, USE_EAS2_R, USE_PAS_R, IGNORE, HIGH_CADENCE, HIGH_CADENCE, HIGH_CADENCE, NOMINAL_CADENCE) ------------------- 2024-03-11T04:24:59 SCET offset = 299 -------------------------------------------------------------------------------- 2024-03-11T04:28:52 AIAF061A Start_PAS_science ------------------- 2024-03-11T04:25:11 SCET offset = 11 PROBLEM => Start science offset 11 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2024-03-11T04:29:12 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2024-03-11T07:58:51 AIAF063A Halt_science_on_PAS ------------------- 2024-03-11T07:55:10 SCET offset = 10 PROBLEM => Stop after Start delay = 299 : should be in [95, 105] -------------------------------------------------------------------------------- 2024-03-11T07:58:59 AIAF133A Abort_the_PAS_sequencer ------------------- 2024-03-11T07:55:18 SCET offset = 18 -------------------------------------------------------------------------------- 2024-03-11T07:59:15 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2024-03-11T07:59:19 SA_ROT_start -------------------------------------------------------------------------------- 2024-03-11T08:19:19 SA_ROT_end -------------------------------------------------------------------------------- 2024-03-11T08:19:25 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2024-03-11T08:19:43 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x00, 0x07, 0x01, 0x01) offset_100 = 62 => OK (no check) -------------------------------------------------------------------------------- 2024-03-11T08:20:23 AIAF061A Start_PAS_science ------------------- 2024-03-11T08:16:42 SCET offset = 102 PROBLEM => Start science offset 102 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2024-03-11T08:20:43 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x00, 0x07, 0x01, 0x5D) offset_100 = 22 => OK (no check) -------------------------------------------------------------------------------- 2024-03-11T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x01) offset_100 = 59 => OK (no check) -------------------------------------------------------------------------------- 2024-03-11T12:00:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2024-03-11T12:09:42 offset_end = 61 Estimated Calibration duration = 0:09:01.600000 offset = 61 => OK -------------------------------------------------------------------------------- 2024-03-11T12:10:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x5D) offset_100 = 30 => OK (no check) -------------------------------------------------------------------------------- 2024-03-12T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x01) offset_100 = 59 => OK (no check) -------------------------------------------------------------------------------- 2024-03-12T12:00:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2024-03-12T12:09:42 offset_end = 61 Estimated Calibration duration = 0:09:01.600000 offset = 61 => OK -------------------------------------------------------------------------------- 2024-03-12T12:10:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x5D) offset_100 = 30 => OK (no check) -------------------------------------------------------------------------------- 2024-03-13T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x01) offset_100 = 59 => OK (no check) -------------------------------------------------------------------------------- 2024-03-13T12:00:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2024-03-13T12:09:42 offset_end = 61 Estimated Calibration duration = 0:09:01.600000 offset = 61 => OK -------------------------------------------------------------------------------- 2024-03-13T12:10:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x5D) offset_100 = 30 => OK (no check) -------------------------------------------------------------------------------- 2024-03-14T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x01) offset_100 = 59 => OK (no check) -------------------------------------------------------------------------------- 2024-03-14T12:00:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2024-03-14T12:09:42 offset_end = 61 Estimated Calibration duration = 0:09:01.600000 offset = 61 => OK -------------------------------------------------------------------------------- 2024-03-14T12:10:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x5D) offset_100 = 30 => OK (no check) -------------------------------------------------------------------------------- 2024-03-15T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x01) offset_100 = 59 => OK (no check) -------------------------------------------------------------------------------- 2024-03-15T12:00:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2024-03-15T12:09:42 offset_end = 61 Estimated Calibration duration = 0:09:01.600000 offset = 61 => OK -------------------------------------------------------------------------------- 2024-03-15T12:10:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x5D) offset_100 = 30 => OK (no check) -------------------------------------------------------------------------------- 2024-03-16T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x01) offset_100 = 59 => OK (no check) -------------------------------------------------------------------------------- 2024-03-16T12:00:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2024-03-16T12:09:42 offset_end = 61 Estimated Calibration duration = 0:09:01.600000 offset = 61 => OK -------------------------------------------------------------------------------- 2024-03-16T12:10:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x5D) offset_100 = 30 => OK (no check) -------------------------------------------------------------------------------- 2024-03-17T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x01) offset_100 = 59 => OK (no check) -------------------------------------------------------------------------------- 2024-03-17T12:00:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2024-03-17T12:09:42 offset_end = 61 Estimated Calibration duration = 0:09:01.600000 offset = 61 => OK -------------------------------------------------------------------------------- 2024-03-17T12:10:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x5D) offset_100 = 30 => OK (no check) -------------------------------------------------------------------------------- 2024-03-18T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x01) offset_100 = 59 => OK (no check) -------------------------------------------------------------------------------- 2024-03-18T12:00:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2024-03-18T12:09:42 offset_end = 61 Estimated Calibration duration = 0:09:01.600000 offset = 61 => OK -------------------------------------------------------------------------------- 2024-03-18T12:10:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x01, 0x07, 0x01, 0x5D) offset_100 = 30 => OK (no check) -------------------------------------------------------------------------------- 2024-03-18T20:15:14 AIAF063A Halt_science_on_PAS ------------------- 2024-03-18T20:11:33 SCET offset = 93 PROBLEM => Stop PAS science offset = 93.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2024-03-18T20:15:22 AIAF133A Abort_the_PAS_sequencer ------------------- 2024-03-18T20:11:41 SCET offset = 101 -------------------------------------------------------------------------------- 2024-03-18T20:15:38 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2024-03-18T20:15:42 SA_ROT_start -------------------------------------------------------------------------------- 2024-03-18T20:35:42 SA_ROT_end -------------------------------------------------------------------------------- 2024-03-18T20:35:48 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2024-03-18T20:36:06 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x00, 0x07, 0x01, 0x01) offset_100 = 45 => OK (no check) -------------------------------------------------------------------------------- 2024-03-18T20:36:46 AIAF061A Start_PAS_science ------------------- 2024-03-18T20:33:05 SCET offset = 185 => OK -------------------------------------------------------------------------------- 2024-03-18T20:37:06 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x38, 0x00, 0x07, 0x01, 0x5D) offset_100 = 5 => OK (no check) -------------------------------------------------------------------------------- 2024-03-18T23:52:30 AIAF063A Halt_science_on_PAS ------------------- 2024-03-18T23:48:49 SCET offset = 229 PROBLEM => Stop PAS science offset = 229.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2024-03-18T23:54:00 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2024-03-18T23:59:38 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2024-03-19T00:05:00 WOL_start -------------------------------------------------------------------------------- 2024-03-19T03:05:00 WOL_end