URL = https://mssl.ucl.ac.uk/missions/SolO/Webpages/weekly_ops_plans/SWA-operations-plan-for-LTP18-STP343-v01_early.html Start of STP343 is 2025-01-13T00:00:00Z DT = 2025-01-13T00:00:00.000 790041600.00 seconds since 2000-01-01 SCET = 1/0790041329:57178 790041329.87 SCET 270.13 seconds drift SCET DRIFT = 270.1275329589844 -------------------------------------------------------------------------------- 2025-01-13T00:05:00 WOL_start -------------------------------------------------------------------------------- 2025-01-13T03:05:00 WOL_end -------------------------------------------------------------------------------- 2025-01-13T04:05:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-01-13T04:05:08 AIAF100B Sensor_cadence (USE_EAS1_R, USE_EAS2_R, USE_PAS_R, IGNORE, HIGH_CADENCE, HIGH_CADENCE, HIGH_CADENCE, NOMINAL_CADENCE) ------------------- 2025-01-13T04:00:38 SCET offset = 38 -------------------------------------------------------------------------------- 2025-01-13T04:05:10 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 40 => OK (no check) -------------------------------------------------------------------------------- 2025-01-13T04:05:14 AIAF135A Configure_PAS_FS (0x00, 0x0A, 0x40, 0x00, 0x09, 0x01) -------------------------------------------------------------------------------- 2025-01-13T04:05:18 AIAF069A Configure_PAS_BM (0x00, 0x04, 0x5A, 0x00, 0x09, 0x24, 0x05, 0x04) -------------------------------------------------------------------------------- 2025-01-13T04:05:22 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-01-13T04:24:22 -------------------------------------------------------------------------------- 2025-01-13T04:27:22 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-01-13T04:29:17 AIAF061A Start_PAS_science ------------------- 2025-01-13T04:24:47 SCET offset = 287 PROBLEM => Start science offset 287 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-01-13T04:30:17 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 47 => OK (no check) -------------------------------------------------------------------------------- 2025-01-13T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 10 => OK (no check) -------------------------------------------------------------------------------- 2025-01-13T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-01-13T12:10:42 offset_end = 72 Estimated Calibration duration = 0:09:01.600000 offset = 72 => OK -------------------------------------------------------------------------------- 2025-01-13T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 41 => OK (no check) -------------------------------------------------------------------------------- 2025-01-14T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 10 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-01-14T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-01-14T12:10:42 offset_end = 72 Estimated Calibration duration = 0:09:01.600000 offset = 72 => OK -------------------------------------------------------------------------------- 2025-01-14T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 41 => OK (no check) -------------------------------------------------------------------------------- 2025-01-15T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 10 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-01-15T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-01-15T12:10:42 offset_end = 72 Estimated Calibration duration = 0:09:01.600000 offset = 72 => OK -------------------------------------------------------------------------------- 2025-01-15T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 41 => OK (no check) -------------------------------------------------------------------------------- 2025-01-16T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 10 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-01-16T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-01-16T12:10:42 offset_end = 72 Estimated Calibration duration = 0:09:01.600000 offset = 72 => OK -------------------------------------------------------------------------------- 2025-01-16T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 41 => OK (no check) -------------------------------------------------------------------------------- 2025-01-17T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 10 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-01-17T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-01-17T12:10:42 offset_end = 72 Estimated Calibration duration = 0:09:01.600000 offset = 72 => OK -------------------------------------------------------------------------------- 2025-01-17T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 41 => OK (no check) -------------------------------------------------------------------------------- 2025-01-17T19:14:49 AIAF063A Halt_science_on_PAS ------------------- 2025-01-17T19:10:19 SCET offset = 19 PROBLEM => Stop PAS science offset = 19.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-01-17T19:16:27 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-01-17T19:23:09 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-01-17T19:28:13 WOL_start -------------------------------------------------------------------------------- 2025-01-17T22:28:13 WOL_end -------------------------------------------------------------------------------- 2025-01-17T23:08:13 CALIB_ROLL_MAG_start -------------------------------------------------------------------------------- 2025-01-17T23:28:17 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-01-17T23:28:21 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-01-17T23:47:21 -------------------------------------------------------------------------------- 2025-01-17T23:50:21 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-01-17T23:51:21 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 11 => OK (no check) -------------------------------------------------------------------------------- 2025-01-17T23:52:13 AIAF061A Start_PAS_science ------------------- 2025-01-17T23:47:43 SCET offset = 163 => OK -------------------------------------------------------------------------------- 2025-01-17T23:52:33 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 83 => OK (no check) -------------------------------------------------------------------------------- 2025-01-18T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 10 => OK (no check) -------------------------------------------------------------------------------- 2025-01-18T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-01-18T12:10:42 offset_end = 72 Estimated Calibration duration = 0:09:01.600000 offset = 72 => OK -------------------------------------------------------------------------------- 2025-01-18T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 41 => OK (no check) -------------------------------------------------------------------------------- 2025-01-18T13:21:29 AIAF063A Halt_science_on_PAS ------------------- 2025-01-18T13:16:59 SCET offset = 119 PROBLEM => Stop PAS science offset = 119.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-01-18T13:23:07 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-01-18T13:24:53 CALIB_ROLL_MAG_end -------------------------------------------------------------------------------- 2025-01-18T13:29:49 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-01-18T13:34:53 WOL_start -------------------------------------------------------------------------------- 2025-01-18T16:34:53 WOL_end -------------------------------------------------------------------------------- 2025-01-18T17:34:57 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-01-18T17:35:01 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-01-18T17:54:01 -------------------------------------------------------------------------------- 2025-01-18T17:57:01 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-01-18T17:58:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 11 => OK (no check) -------------------------------------------------------------------------------- 2025-01-18T17:58:53 AIAF061A Start_PAS_science ------------------- 2025-01-18T17:54:23 SCET offset = 263 PROBLEM => Start science offset 263 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-01-18T17:59:13 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 83 => OK (no check) -------------------------------------------------------------------------------- 2025-01-19T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 10 => OK (no check) -------------------------------------------------------------------------------- 2025-01-19T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-01-19T12:10:42 offset_end = 72 Estimated Calibration duration = 0:09:01.600000 offset = 72 => OK -------------------------------------------------------------------------------- 2025-01-19T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 41 => OK (no check) -------------------------------------------------------------------------------- 2025-01-19T23:52:50 AIAF063A Halt_science_on_PAS ------------------- 2025-01-19T23:48:20 SCET offset = 200 PROBLEM => Stop PAS science offset = 200.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-01-19T23:54:20 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-01-19T23:59:38 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-01-20T00:00:00 NAV_start -------------------------------------------------------------------------------- 2025-01-20T00:05:00 WOL_start -------------------------------------------------------------------------------- 2025-01-20T03:05:00 WOL_end