URL = https://mssl.ucl.ac.uk/missions/SolO/Webpages/weekly_ops_plans/SWA-operations-plan-for-LTP18-STP350-v01_early.html Start of STP350 is 2025-02-23T18:30:00Z DT = 2025-02-23T00:00:00.000 793584000.00 seconds since 2000-01-01 SCET = 1/0793583723:23939 793583723.37 SCET 276.63 seconds drift SCET DRIFT = 276.6347198486328 -------------------------------------------------------------------------------- 2025-02-23T19:45:00 WOL_start -------------------------------------------------------------------------------- 2025-02-23T22:45:00 WOL_end -------------------------------------------------------------------------------- 2025-02-23T23:00:00 TCM_start -------------------------------------------------------------------------------- 2025-02-24T04:25:00 TCM_end -------------------------------------------------------------------------------- 2025-02-24T05:25:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-02-24T05:25:08 AIAF100B Sensor_cadence (USE_EAS1_R, USE_EAS2_R, USE_PAS_R, IGNORE, HIGH_CADENCE, HIGH_CADENCE, HIGH_CADENCE, NOMINAL_CADENCE) ------------------- 2025-02-24T05:20:32 SCET offset = 32 -------------------------------------------------------------------------------- 2025-02-24T05:25:10 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 34 => OK (no check) -------------------------------------------------------------------------------- 2025-02-24T05:25:14 AIAF135A Configure_PAS_FS (0x00, 0x0A, 0x40, 0x00, 0x09, 0x01) -------------------------------------------------------------------------------- 2025-02-24T05:25:18 AIAF069A Configure_PAS_BM (0x00, 0x04, 0x5A, 0x00, 0x09, 0x24, 0x05, 0x04) -------------------------------------------------------------------------------- 2025-02-24T05:25:22 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-02-24T05:44:22 -------------------------------------------------------------------------------- 2025-02-24T05:47:22 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-02-24T05:49:17 AIAF061A Start_PAS_science ------------------- 2025-02-24T05:44:41 SCET offset = 281 PROBLEM => Start science offset 281 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-02-24T05:50:17 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 41 => OK (no check) -------------------------------------------------------------------------------- 2025-02-24T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 => OK (no check) -------------------------------------------------------------------------------- 2025-02-24T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-02-24T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-02-24T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-02-25T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-02-25T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-02-25T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-02-25T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-02-26T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-02-26T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-02-26T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-02-26T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-02-27T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-02-27T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-02-27T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-02-27T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-02-28T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-02-28T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-02-28T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-02-28T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-03-01T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-01T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-01T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-03-01T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-03-02T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-02T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-02T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-03-02T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-03-03T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-03T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-03T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-03-03T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-03-04T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-04T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-04T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-03-04T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-03-05T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-05T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-05T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-03-05T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-03-06T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-06T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-06T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-03-06T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-03-07T01:53:31 AIAF063A Halt_science_on_PAS ------------------- 2025-03-07T01:48:55 SCET offset = 235 PROBLEM => Stop PAS science offset = 235.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-07T01:53:39 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-03-07T01:49:03 SCET offset = 243 -------------------------------------------------------------------------------- 2025-03-07T01:53:55 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-03-07T01:53:59 SA_ROT_start -------------------------------------------------------------------------------- 2025-03-07T02:13:59 SA_ROT_end -------------------------------------------------------------------------------- 2025-03-07T02:14:05 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-03-07T02:14:23 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 87 => OK (no check) -------------------------------------------------------------------------------- 2025-03-07T02:15:03 AIAF061A Start_PAS_science ------------------- 2025-03-07T02:10:27 SCET offset = 27 => OK -------------------------------------------------------------------------------- 2025-03-07T02:15:23 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 47 => OK (no check) -------------------------------------------------------------------------------- 2025-03-07T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 4 => OK (no check) -------------------------------------------------------------------------------- 2025-03-07T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-07T12:10:42 offset_end = 66 Estimated Calibration duration = 0:09:01.600000 offset = 66 => OK -------------------------------------------------------------------------------- 2025-03-07T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-03-07T23:42:50 AIAF063A Halt_science_on_PAS ------------------- 2025-03-07T23:38:14 SCET offset = 194 PROBLEM => Stop PAS science offset = 194.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-07T23:44:20 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-03-07T23:49:38 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-08T20:45:00 WOL_start -------------------------------------------------------------------------------- 2025-03-08T23:45:00 WOL_end