URL = https://mssl.ucl.ac.uk/missions/SolO/Webpages/weekly_ops_plans/SWA-operations-plan-for-LTP19-STP352-v01_early.html Start of STP352 is 2025-03-10T00:00:00Z DT = 2025-03-10T00:00:00.000 794880000.00 seconds since 2000-01-01 SCET = 1/0794879720:64112 794879720.98 SCET 279.02 seconds drift SCET DRIFT = 279.021728515625 -------------------------------------------------------------------------------- 2025-03-10T00:05:00 WOL_start -------------------------------------------------------------------------------- 2025-03-10T03:05:00 WOL_end -------------------------------------------------------------------------------- 2025-03-10T04:05:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-10T04:05:08 AIAF100B Sensor_cadence (USE_EAS1_R, USE_EAS2_R, USE_PAS_R, IGNORE, HIGH_CADENCE, HIGH_CADENCE, HIGH_CADENCE, NOMINAL_CADENCE) ------------------- 2025-03-10T04:00:29 SCET offset = 29 -------------------------------------------------------------------------------- 2025-03-10T04:05:10 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-10T04:05:14 AIAF135A Configure_PAS_FS (0x00, 0x0A, 0x40, 0x00, 0x09, 0x01) -------------------------------------------------------------------------------- 2025-03-10T04:05:18 AIAF069A Configure_PAS_BM (0x00, 0x04, 0x5A, 0x00, 0x09, 0x24, 0x05, 0x04) -------------------------------------------------------------------------------- 2025-03-10T04:05:22 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-03-10T04:24:22 -------------------------------------------------------------------------------- 2025-03-10T04:27:22 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-03-10T04:29:17 AIAF061A Start_PAS_science ------------------- 2025-03-10T04:24:38 SCET offset = 278 PROBLEM => Start science offset 278 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-03-10T04:30:17 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 38 => OK (no check) -------------------------------------------------------------------------------- 2025-03-10T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 1 => OK (no check) -------------------------------------------------------------------------------- 2025-03-10T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-10T12:10:42 offset_end = 63 Estimated Calibration duration = 0:09:01.600000 offset = 63 => OK -------------------------------------------------------------------------------- 2025-03-10T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 32 => OK (no check) -------------------------------------------------------------------------------- 2025-03-11T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 1 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-11T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-11T12:10:42 offset_end = 63 Estimated Calibration duration = 0:09:01.600000 offset = 63 => OK -------------------------------------------------------------------------------- 2025-03-11T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 32 => OK (no check) -------------------------------------------------------------------------------- 2025-03-12T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 1 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-12T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-12T12:10:42 offset_end = 63 Estimated Calibration duration = 0:09:01.600000 offset = 63 => OK -------------------------------------------------------------------------------- 2025-03-12T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 32 => OK (no check) -------------------------------------------------------------------------------- 2025-03-13T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 1 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-13T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-13T12:10:42 offset_end = 63 Estimated Calibration duration = 0:09:01.600000 offset = 63 => OK -------------------------------------------------------------------------------- 2025-03-13T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 32 => OK (no check) -------------------------------------------------------------------------------- 2025-03-14T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 1 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-14T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-14T12:10:42 offset_end = 63 Estimated Calibration duration = 0:09:01.600000 offset = 63 => OK -------------------------------------------------------------------------------- 2025-03-14T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 32 => OK (no check) -------------------------------------------------------------------------------- 2025-03-14T22:43:18 AIAF063A Halt_science_on_PAS ------------------- 2025-03-14T22:38:39 SCET offset = 219 PROBLEM => Stop PAS science offset = 219.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-14T22:43:26 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-03-14T22:38:47 SCET offset = 227 -------------------------------------------------------------------------------- 2025-03-14T22:43:42 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-03-14T22:43:46 SA_ROT_start -------------------------------------------------------------------------------- 2025-03-14T23:03:46 SA_ROT_end -------------------------------------------------------------------------------- 2025-03-14T23:03:52 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-03-14T23:04:10 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 71 => OK (no check) -------------------------------------------------------------------------------- 2025-03-14T23:04:50 AIAF061A Start_PAS_science ------------------- 2025-03-14T23:00:11 SCET offset = 11 PROBLEM => Start science offset 11 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-03-14T23:05:10 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-15T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 1 => OK (no check) -------------------------------------------------------------------------------- 2025-03-15T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-15T12:10:42 offset_end = 63 Estimated Calibration duration = 0:09:01.600000 offset = 63 => OK -------------------------------------------------------------------------------- 2025-03-15T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 32 => OK (no check) -------------------------------------------------------------------------------- 2025-03-15T22:47:50 AIAF063A Halt_science_on_PAS ------------------- 2025-03-15T22:43:11 SCET offset = 191 PROBLEM => Stop PAS science offset = 191.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-15T22:49:20 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-03-15T22:54:38 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-15T23:00:00 WOL_start -------------------------------------------------------------------------------- 2025-03-16T02:00:00 WOL_end -------------------------------------------------------------------------------- 2025-03-16T03:00:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-16T03:00:08 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-03-16T03:19:08 -------------------------------------------------------------------------------- 2025-03-16T03:22:08 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-03-16T03:23:08 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 9 => OK (no check) -------------------------------------------------------------------------------- 2025-03-16T03:24:00 AIAF061A Start_PAS_science ------------------- 2025-03-16T03:19:21 SCET offset = 261 PROBLEM => Start science offset 261 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-03-16T03:24:20 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 81 => OK (no check) -------------------------------------------------------------------------------- 2025-03-16T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 1 => OK (no check) -------------------------------------------------------------------------------- 2025-03-16T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-16T12:10:42 offset_end = 63 Estimated Calibration duration = 0:09:01.600000 offset = 63 => OK -------------------------------------------------------------------------------- 2025-03-16T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 32 => OK (no check) -------------------------------------------------------------------------------- 2025-03-17T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 1 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-17T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-17T12:10:42 offset_end = 63 Estimated Calibration duration = 0:09:01.600000 offset = 63 => OK -------------------------------------------------------------------------------- 2025-03-17T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 32 => OK (no check) -------------------------------------------------------------------------------- 2025-03-18T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 1 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-18T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-18T12:10:42 offset_end = 63 Estimated Calibration duration = 0:09:01.600000 offset = 63 => OK -------------------------------------------------------------------------------- 2025-03-18T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 32 => OK (no check) -------------------------------------------------------------------------------- 2025-03-18T18:54:17 AIAF063A Halt_science_on_PAS ------------------- 2025-03-18T18:49:38 SCET offset = 278 PROBLEM => Stop PAS science offset = 278.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-18T18:54:25 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-03-18T18:49:46 SCET offset = 286 -------------------------------------------------------------------------------- 2025-03-18T18:54:41 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-03-18T18:54:45 SA_ROT_start -------------------------------------------------------------------------------- 2025-03-18T19:14:45 SA_ROT_end -------------------------------------------------------------------------------- 2025-03-18T19:14:51 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-03-18T19:15:09 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 30 => OK (no check) -------------------------------------------------------------------------------- 2025-03-18T19:15:49 AIAF061A Start_PAS_science ------------------- 2025-03-18T19:11:10 SCET offset = 70 => OK -------------------------------------------------------------------------------- 2025-03-18T19:16:09 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 90 => OK (no check) -------------------------------------------------------------------------------- 2025-03-19T11:47:50 AIAF063A Halt_science_on_PAS ------------------- 2025-03-19T11:43:11 SCET offset = 191 PROBLEM => Stop PAS science offset = 191.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-19T11:49:20 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-03-19T11:54:38 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-19T12:40:00 SPICE_heater_power_off_start -------------------------------------------------------------------------------- 2025-03-19T12:50:00 SPICE_heater_power_off_end