URL = https://mssl.ucl.ac.uk/missions/SolO/Webpages/weekly_ops_plans/SWA-operations-plan-for-LTP19-STP353-v01_early.html Start of STP353 is 2025-03-19T12:00:00Z DT = 2025-03-19T00:00:00.000 795657600.00 seconds since 2000-01-01 SCET = 1/0795657319:33724 795657319.51 SCET 280.49 seconds drift SCET DRIFT = 280.48541259765625 -------------------------------------------------------------------------------- 2025-03-19T12:40:00 SPICE_heater_power_off_start -------------------------------------------------------------------------------- 2025-03-19T12:50:00 SPICE_heater_power_off_end -------------------------------------------------------------------------------- 2025-03-20T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 0 => OK (no check) -------------------------------------------------------------------------------- 2025-03-20T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-20T12:10:42 offset_end = 62 Estimated Calibration duration = 0:09:01.600000 offset = 62 => OK -------------------------------------------------------------------------------- 2025-03-20T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-20T22:46:36 AIAF063A Halt_science_on_PAS ------------------- 2025-03-20T22:41:56 SCET offset = 116 PROBLEM => Stop PAS science offset = 116.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-20T22:48:14 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-03-20T22:54:56 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-20T23:00:00 WOL_start -------------------------------------------------------------------------------- 2025-03-21T02:00:00 WOL_end -------------------------------------------------------------------------------- 2025-03-21T03:00:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-21T03:00:08 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-03-21T03:19:08 -------------------------------------------------------------------------------- 2025-03-21T03:22:08 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-03-21T03:23:08 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 8 => OK (no check) -------------------------------------------------------------------------------- 2025-03-21T03:24:00 AIAF061A Start_PAS_science ------------------- 2025-03-21T03:19:20 SCET offset = 260 PROBLEM => Start science offset 260 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-03-21T03:24:20 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 80 => OK (no check) -------------------------------------------------------------------------------- 2025-03-21T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 0 => OK (no check) -------------------------------------------------------------------------------- 2025-03-21T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-21T12:10:42 offset_end = 62 Estimated Calibration duration = 0:09:01.600000 offset = 62 => OK -------------------------------------------------------------------------------- 2025-03-21T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-22T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 0 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-22T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-22T12:10:42 offset_end = 62 Estimated Calibration duration = 0:09:01.600000 offset = 62 => OK -------------------------------------------------------------------------------- 2025-03-22T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-23T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 0 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-23T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-23T12:10:42 offset_end = 62 Estimated Calibration duration = 0:09:01.600000 offset = 62 => OK -------------------------------------------------------------------------------- 2025-03-23T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-24T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 0 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-24T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-24T12:10:42 offset_end = 62 Estimated Calibration duration = 0:09:01.600000 offset = 62 => OK -------------------------------------------------------------------------------- 2025-03-24T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-24T19:56:16 AIAF063A Halt_science_on_PAS ------------------- 2025-03-24T19:51:36 SCET offset = 96 PROBLEM => Stop PAS science offset = 96.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-24T19:56:24 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-03-24T19:51:44 SCET offset = 104 -------------------------------------------------------------------------------- 2025-03-24T19:56:40 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-03-24T19:56:44 SA_ROT_start -------------------------------------------------------------------------------- 2025-03-24T20:16:44 SA_ROT_end -------------------------------------------------------------------------------- 2025-03-24T20:16:50 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-03-24T20:17:08 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 48 => OK (no check) -------------------------------------------------------------------------------- 2025-03-24T20:17:48 AIAF061A Start_PAS_science ------------------- 2025-03-24T20:13:08 SCET offset = 188 => OK -------------------------------------------------------------------------------- 2025-03-24T20:18:08 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 8 => OK (no check) -------------------------------------------------------------------------------- 2025-03-25T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 0 => OK (no check) -------------------------------------------------------------------------------- 2025-03-25T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-25T12:10:42 offset_end = 62 Estimated Calibration duration = 0:09:01.600000 offset = 62 => OK -------------------------------------------------------------------------------- 2025-03-25T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-26T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 0 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-26T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-26T12:10:42 offset_end = 62 Estimated Calibration duration = 0:09:01.600000 offset = 62 => OK -------------------------------------------------------------------------------- 2025-03-26T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-26T13:46:36 AIAF063A Halt_science_on_PAS ------------------- 2025-03-26T13:41:56 SCET offset = 116 PROBLEM => Stop PAS science offset = 116.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-26T13:48:14 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-03-26T13:54:56 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-26T14:00:00 WOL_start -------------------------------------------------------------------------------- 2025-03-26T17:00:00 WOL_end -------------------------------------------------------------------------------- 2025-03-26T18:00:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-26T18:00:08 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-03-26T18:19:08 -------------------------------------------------------------------------------- 2025-03-26T18:22:08 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-03-26T18:23:08 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 8 => OK (no check) -------------------------------------------------------------------------------- 2025-03-26T18:24:00 AIAF061A Start_PAS_science ------------------- 2025-03-26T18:19:20 SCET offset = 260 PROBLEM => Start science offset 260 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-03-26T18:24:20 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 80 => OK (no check) -------------------------------------------------------------------------------- 2025-03-27T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 0 => OK (no check) -------------------------------------------------------------------------------- 2025-03-27T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-27T12:10:42 offset_end = 62 Estimated Calibration duration = 0:09:01.600000 offset = 62 => OK -------------------------------------------------------------------------------- 2025-03-27T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-28T11:59:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 0 PROBLEM => offset_100 not in [20,80] -------------------------------------------------------------------------------- 2025-03-28T12:01:41 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-28T12:10:42 offset_end = 62 Estimated Calibration duration = 0:09:01.600000 offset = 62 => OK -------------------------------------------------------------------------------- 2025-03-28T12:11:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 31 => OK (no check) -------------------------------------------------------------------------------- 2025-03-28T22:59:00 ROLL_start -------------------------------------------------------------------------------- 2025-03-28T23:49:00 ROLL_end -------------------------------------------------------------------------------- 2025-03-28T23:50:36 AIAF063A Halt_science_on_PAS ------------------- 2025-03-28T23:45:56 SCET offset = 56 PROBLEM => Stop PAS science offset = 56.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-28T23:52:14 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-03-28T23:58:56 AIAF113A Disable_TTF_response_for_EAS_and_PAS