URL = https://mssl.ucl.ac.uk/missions/SolO/Webpages/weekly_ops_plans/SWA-operations-plan-for-LTP19-STP354-v01_early.html Start of STP354 is 2025-03-29T00:00:00Z DT = 2025-03-29T00:00:00.000 796521600.00 seconds since 2000-01-01 SCET = 1/0796521317:57764 796521317.88 SCET 282.12 seconds drift SCET DRIFT = 282.11859130859375 -------------------------------------------------------------------------------- 2025-03-29T00:00:09 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-29T00:00:13 AIAF100B Sensor_cadence (USE_EAS1_R, USE_EAS2_R, USE_PAS_R, IGNORE, HIGH_CADENCE, HIGH_CADENCE, HIGH_CADENCE, NOMINAL_CADENCE) ------------------- 2025-03-28T23:55:31 SCET offset = 31 -------------------------------------------------------------------------------- 2025-03-29T00:05:30 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 48 => OK (no check) -------------------------------------------------------------------------------- 2025-03-29T00:05:34 AIAF135A Configure_PAS_FS (0x00, 0x0A, 0x40, 0x00, 0x09, 0x01) -------------------------------------------------------------------------------- 2025-03-29T00:05:38 AIAF069A Configure_PAS_BM (0x00, 0x04, 0x5A, 0x00, 0x09, 0x24, 0x05, 0x04) -------------------------------------------------------------------------------- 2025-03-29T00:05:42 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-03-29T00:24:42 -------------------------------------------------------------------------------- 2025-03-29T00:27:42 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-03-29T00:29:37 AIAF061A Start_PAS_science ------------------- 2025-03-29T00:24:55 SCET offset = 295 PROBLEM => Start science offset 295 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-03-29T00:30:37 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 55 => OK (no check) -------------------------------------------------------------------------------- 2025-03-29T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 58 => OK (no check) -------------------------------------------------------------------------------- 2025-03-29T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-29T12:10:52 offset_end = 70 Estimated Calibration duration = 0:09:01.600000 offset = 70 => OK -------------------------------------------------------------------------------- 2025-03-29T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 39 => OK (no check) -------------------------------------------------------------------------------- 2025-03-30T06:47:50 AIAF063A Halt_science_on_PAS ------------------- 2025-03-30T06:43:08 SCET offset = 188 PROBLEM => Stop PAS science offset = 188.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-03-30T06:49:20 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-03-30T06:54:38 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-30T07:00:00 WOL_start -------------------------------------------------------------------------------- 2025-03-30T10:00:00 WOL_end -------------------------------------------------------------------------------- 2025-03-30T11:00:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-03-30T11:00:08 AIAF100B Sensor_cadence (USE_EAS1_R, USE_EAS2_R, USE_PAS_R, IGNORE, HIGH_CADENCE, HIGH_CADENCE, HIGH_CADENCE, NOMINAL_CADENCE) ------------------- 2025-03-30T10:55:26 SCET offset = 26 -------------------------------------------------------------------------------- 2025-03-30T11:00:10 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 28 => OK (no check) -------------------------------------------------------------------------------- 2025-03-30T11:00:14 AIAF135A Configure_PAS_FS (0x00, 0x0A, 0x40, 0x00, 0x09, 0x01) -------------------------------------------------------------------------------- 2025-03-30T11:00:18 AIAF069A Configure_PAS_BM (0x00, 0x04, 0x5A, 0x00, 0x09, 0x24, 0x05, 0x04) -------------------------------------------------------------------------------- 2025-03-30T11:00:22 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-03-30T11:19:22 -------------------------------------------------------------------------------- 2025-03-30T11:22:22 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-03-30T11:24:17 AIAF061A Start_PAS_science ------------------- 2025-03-30T11:19:35 SCET offset = 275 PROBLEM => Start science offset 275 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-03-30T11:25:17 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-03-30T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 58 => OK (no check) -------------------------------------------------------------------------------- 2025-03-30T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-30T12:10:52 offset_end = 70 Estimated Calibration duration = 0:09:01.600000 offset = 70 => OK -------------------------------------------------------------------------------- 2025-03-30T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 39 => OK (no check) -------------------------------------------------------------------------------- 2025-03-31T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 58 => OK (no check) -------------------------------------------------------------------------------- 2025-03-31T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-03-31T12:10:52 offset_end = 70 Estimated Calibration duration = 0:09:01.600000 offset = 70 => OK -------------------------------------------------------------------------------- 2025-03-31T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 39 => OK (no check) -------------------------------------------------------------------------------- 2025-04-01T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 58 => OK (no check) -------------------------------------------------------------------------------- 2025-04-01T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-04-01T12:10:52 offset_end = 70 Estimated Calibration duration = 0:09:01.600000 offset = 70 => OK -------------------------------------------------------------------------------- 2025-04-01T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 39 => OK (no check) -------------------------------------------------------------------------------- 2025-04-02T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 58 => OK (no check) -------------------------------------------------------------------------------- 2025-04-02T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-04-02T12:10:52 offset_end = 70 Estimated Calibration duration = 0:09:01.600000 offset = 70 => OK -------------------------------------------------------------------------------- 2025-04-02T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 39 => OK (no check) -------------------------------------------------------------------------------- 2025-04-03T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 58 => OK (no check) -------------------------------------------------------------------------------- 2025-04-03T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-04-03T12:10:52 offset_end = 70 Estimated Calibration duration = 0:09:01.600000 offset = 70 => OK -------------------------------------------------------------------------------- 2025-04-03T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 39 => OK (no check) -------------------------------------------------------------------------------- 2025-04-03T23:47:50 AIAF063A Halt_science_on_PAS ------------------- 2025-04-03T23:43:08 SCET offset = 188 PROBLEM => Stop PAS science offset = 188.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-04-03T23:49:20 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-04-03T23:54:38 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-04-04T00:00:00 WOL_start -------------------------------------------------------------------------------- 2025-04-04T03:00:00 WOL_end -------------------------------------------------------------------------------- 2025-04-04T04:00:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-04-04T04:00:08 AIAF100B Sensor_cadence (USE_EAS1_R, USE_EAS2_R, USE_PAS_R, IGNORE, HIGH_CADENCE, HIGH_CADENCE, HIGH_CADENCE, NOMINAL_CADENCE) ------------------- 2025-04-04T03:55:26 SCET offset = 26 -------------------------------------------------------------------------------- 2025-04-04T04:00:10 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 28 => OK (no check) -------------------------------------------------------------------------------- 2025-04-04T04:00:14 AIAF135A Configure_PAS_FS (0x00, 0x0A, 0x40, 0x00, 0x09, 0x01) -------------------------------------------------------------------------------- 2025-04-04T04:00:18 AIAF069A Configure_PAS_BM (0x00, 0x04, 0x5A, 0x00, 0x09, 0x24, 0x05, 0x04) -------------------------------------------------------------------------------- 2025-04-04T04:00:22 AIAF066A Recover_PAS_HVs (0x05C2) Need to wait 00:19:00 until 2025-04-04T04:19:22 -------------------------------------------------------------------------------- 2025-04-04T04:22:22 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-04-04T04:24:17 AIAF061A Start_PAS_science ------------------- 2025-04-04T04:19:35 SCET offset = 275 PROBLEM => Start science offset 275 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-04-04T04:25:17 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 35 => OK (no check) -------------------------------------------------------------------------------- 2025-04-04T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 58 => OK (no check) -------------------------------------------------------------------------------- 2025-04-04T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-04-04T12:10:52 offset_end = 70 Estimated Calibration duration = 0:09:01.600000 offset = 70 => OK -------------------------------------------------------------------------------- 2025-04-04T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 39 => OK (no check) -------------------------------------------------------------------------------- 2025-04-05T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 58 => OK (no check) -------------------------------------------------------------------------------- 2025-04-05T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-04-05T12:10:52 offset_end = 70 Estimated Calibration duration = 0:09:01.600000 offset = 70 => OK -------------------------------------------------------------------------------- 2025-04-05T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 39 => OK (no check) -------------------------------------------------------------------------------- 2025-04-06T05:55:00 ROLL_start -------------------------------------------------------------------------------- 2025-04-06T06:45:00 ROLL_end -------------------------------------------------------------------------------- 2025-04-06T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 58 => OK (no check) -------------------------------------------------------------------------------- 2025-04-06T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x05C2) Need to wait 00:09:01 until 2025-04-06T12:10:52 offset_end = 70 Estimated Calibration duration = 0:09:01.600000 offset = 70 => OK -------------------------------------------------------------------------------- 2025-04-06T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 39 => OK (no check) -------------------------------------------------------------------------------- 2025-04-06T17:46:36 AIAF063A Halt_science_on_PAS ------------------- 2025-04-06T17:41:54 SCET offset = 114 PROBLEM => Stop PAS science offset = 114.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-04-06T17:48:14 AIAF065A Safe_PAS_HVs (0x05C2) -------------------------------------------------------------------------------- 2025-04-06T17:54:56 AIAF113A Disable_TTF_response_for_EAS_and_PAS