URL = https://mssl.ucl.ac.uk/missions/SolO/Webpages/weekly_ops_plans/SWA-operations-plan-for-LTP19-STP355-v01.html Start of STP355 is 2025-04-06T18:00:00Z DT = 2025-04-06T00:00:00.000 797212800.00 seconds since 2000-01-01 SCET = 1/0797212516:37134 797212516.57 SCET 283.43 seconds drift SCET DRIFT = 283.4333801269531 -------------------------------------------------------------------------------- 2025-04-06T18:00:09 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-04-06T18:00:13 AIAF100B Sensor_cadence (USE_EAS1_R, USE_EAS2_R, USE_PAS_R, IGNORE, HIGH_CADENCE, HIGH_CADENCE, HIGH_CADENCE, NOMINAL_CADENCE) ------------------- 2025-04-06T17:55:30 SCET offset = 30 -------------------------------------------------------------------------------- 2025-04-06T18:00:17 AIAF135A Configure_PAS_FS (0x00, 0x0A, 0x40, 0x00, 0x09, 0x01) -------------------------------------------------------------------------------- 2025-04-06T18:00:21 AIAF069A Configure_PAS_BM (0x00, 0x04, 0x5A, 0x00, 0x09, 0x24, 0x05, 0x04) -------------------------------------------------------------------------------- 2025-04-06T18:00:33 AIAF066A Recover_PAS_HVs (0x0613) Need to wait 00:19:50 until 2025-04-06T18:20:23 -------------------------------------------------------------------------------- 2025-04-06T18:23:33 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-04-06T18:23:53 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 50 => OK (no check) -------------------------------------------------------------------------------- 2025-04-06T18:24:05 AIAF061A Start_PAS_science ------------------- 2025-04-06T18:19:22 SCET offset = 262 PROBLEM => Start science offset 262 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-04-06T18:24:58 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 15 => OK (no check) -------------------------------------------------------------------------------- 2025-04-07T08:02:39 AIAF063A Halt_science_on_PAS ------------------- 2025-04-07T07:57:56 SCET offset = 176 PROBLEM => Stop after Start delay = 214 : should be in [95, 105] -------------------------------------------------------------------------------- 2025-04-07T08:02:47 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-04-07T07:58:04 SCET offset = 184 -------------------------------------------------------------------------------- 2025-04-07T08:03:03 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-04-07T08:03:07 SA_ROT_start -------------------------------------------------------------------------------- 2025-04-07T08:23:07 SA_ROT_end -------------------------------------------------------------------------------- 2025-04-07T08:23:13 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-04-07T08:23:31 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 28 => OK (no check) -------------------------------------------------------------------------------- 2025-04-07T08:24:11 AIAF061A Start_PAS_science ------------------- 2025-04-07T08:19:28 SCET offset = 268 PROBLEM => Start science offset 268 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-04-07T08:24:58 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 15 => OK (no check) -------------------------------------------------------------------------------- 2025-04-07T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 57 => OK (no check) -------------------------------------------------------------------------------- 2025-04-07T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-04-07T12:10:52 offset_end = 69 Estimated Calibration duration = 0:09:01.600000 offset = 69 => OK -------------------------------------------------------------------------------- 2025-04-07T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 38 => OK (no check) -------------------------------------------------------------------------------- 2025-04-08T11:46:36 AIAF063A Halt_science_on_PAS ------------------- 2025-04-08T11:41:53 SCET offset = 113 PROBLEM => Stop PAS science offset = 113.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-04-08T11:48:14 AIAF065A Safe_PAS_HVs (0x0613) -------------------------------------------------------------------------------- 2025-04-08T11:54:56 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-04-08T12:00:00 WOL_start -------------------------------------------------------------------------------- 2025-04-08T15:00:00 WOL_end -------------------------------------------------------------------------------- 2025-04-08T16:00:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-04-08T16:00:08 AIAF066A Recover_PAS_HVs (0x0613) Need to wait 00:19:50 until 2025-04-08T16:19:58 -------------------------------------------------------------------------------- 2025-04-08T16:23:08 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-04-08T16:23:28 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 25 => OK (no check) -------------------------------------------------------------------------------- 2025-04-08T16:24:00 AIAF061A Start_PAS_science ------------------- 2025-04-08T16:19:17 SCET offset = 257 PROBLEM => Start science offset 257 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-04-08T16:24:58 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 15 => OK (no check) -------------------------------------------------------------------------------- 2025-04-09T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 57 => OK (no check) -------------------------------------------------------------------------------- 2025-04-09T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-04-09T12:10:52 offset_end = 69 Estimated Calibration duration = 0:09:01.600000 offset = 69 => OK -------------------------------------------------------------------------------- 2025-04-09T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 38 => OK (no check) -------------------------------------------------------------------------------- 2025-04-10T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 57 => OK (no check) -------------------------------------------------------------------------------- 2025-04-10T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-04-10T12:10:52 offset_end = 69 Estimated Calibration duration = 0:09:01.600000 offset = 69 => OK -------------------------------------------------------------------------------- 2025-04-10T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 38 => OK (no check) -------------------------------------------------------------------------------- 2025-04-11T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 57 => OK (no check) -------------------------------------------------------------------------------- 2025-04-11T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-04-11T12:10:52 offset_end = 69 Estimated Calibration duration = 0:09:01.600000 offset = 69 => OK -------------------------------------------------------------------------------- 2025-04-11T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 38 => OK (no check) -------------------------------------------------------------------------------- 2025-04-12T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 57 => OK (no check) -------------------------------------------------------------------------------- 2025-04-12T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-04-12T12:10:52 offset_end = 69 Estimated Calibration duration = 0:09:01.600000 offset = 69 => OK -------------------------------------------------------------------------------- 2025-04-12T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 38 => OK (no check) -------------------------------------------------------------------------------- 2025-04-13T09:04:18 AIAF063A Halt_science_on_PAS ------------------- 2025-04-13T08:59:35 SCET offset = 275 PROBLEM => Stop PAS science offset = 275.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-04-13T09:04:46 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-04-13T09:00:03 SCET offset = 3 -------------------------------------------------------------------------------- 2025-04-13T09:05:02 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-04-13T09:05:06 SA_ROT_start -------------------------------------------------------------------------------- 2025-04-13T09:25:06 SA_ROT_end -------------------------------------------------------------------------------- 2025-04-13T09:25:12 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-04-13T09:25:30 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 47 => OK (no check) -------------------------------------------------------------------------------- 2025-04-13T09:26:10 AIAF061A Start_PAS_science ------------------- 2025-04-13T09:21:27 SCET offset = 87 => OK -------------------------------------------------------------------------------- 2025-04-13T09:26:38 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 15 => OK (no check) -------------------------------------------------------------------------------- 2025-04-13T12:00:40 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 57 => OK (no check) -------------------------------------------------------------------------------- 2025-04-13T12:01:51 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-04-13T12:10:52 offset_end = 69 Estimated Calibration duration = 0:09:01.600000 offset = 69 => OK -------------------------------------------------------------------------------- 2025-04-13T12:12:01 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 38 => OK (no check) -------------------------------------------------------------------------------- 2025-04-13T23:47:38 AIAF063A Halt_science_on_PAS ------------------- 2025-04-13T23:42:55 SCET offset = 175 PROBLEM => Stop PAS science offset = 175.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-04-13T23:49:20 AIAF065A Safe_PAS_HVs (0x0613) -------------------------------------------------------------------------------- 2025-04-13T23:55:56 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-04-14T07:00:00 WOL_start -------------------------------------------------------------------------------- 2025-04-14T10:00:00 WOL_end