URL = https://mssl.ucl.ac.uk/missions/SolO/Webpages/weekly_ops_plans/SWA-operations-plan-for-LTP20-STP366-v01.html Start of STP366 is 2025-06-23T00:00:00Z DT = 2025-06-23T00:00:00.000 803952000.00 seconds since 2000-01-01 SCET = 1/0803951704:03229 803951704.05 SCET 295.95 seconds drift SCET DRIFT = 295.9507293701172 -------------------------------------------------------------------------------- 2025-06-23T00:05:00 WOL_start -------------------------------------------------------------------------------- 2025-06-23T03:05:00 WOL_end -------------------------------------------------------------------------------- 2025-06-23T04:05:04 AIAF112A Enable_TFF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-06-23T04:05:08 AIAF100B Sensor_cadence (USE_EAS1_R, USE_EAS2_R, USE_PAS_R, IGNORE, HIGH_CADENCE, HIGH_CADENCE, HIGH_CADENCE, NOMINAL_CADENCE) ------------------- 2025-06-23T04:00:13 SCET offset = 13 -------------------------------------------------------------------------------- 2025-06-23T04:05:10 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 15 => OK (no check) -------------------------------------------------------------------------------- 2025-06-23T04:05:14 AIAF135A Configure_PAS_FS (0x00, 0x0A, 0x40, 0x00, 0x09, 0x01) -------------------------------------------------------------------------------- 2025-06-23T04:05:18 AIAF069A Configure_PAS_BM (0x00, 0x04, 0x5A, 0x00, 0x09, 0x24, 0x05, 0x04) -------------------------------------------------------------------------------- 2025-06-23T04:05:22 AIAF066A Recover_PAS_HVs (0x0613) Need to wait 00:19:50 until 2025-06-23T04:25:12 -------------------------------------------------------------------------------- 2025-06-23T04:28:22 AIAF066B Enable_last_of_PAS_FDIR_monitors -------------------------------------------------------------------------------- 2025-06-23T04:30:17 AIAF061A Start_PAS_science ------------------- 2025-06-23T04:25:22 SCET offset = 22 => OK -------------------------------------------------------------------------------- 2025-06-23T04:31:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 16 => OK (no check) -------------------------------------------------------------------------------- 2025-06-23T08:54:08 ROLL_start_start_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-23T09:44:08 ROLL_end_end_angle_deg:57 -------------------------------------------------------------------------------- 2025-06-23T10:57:51 AIAF063A Halt_science_on_PAS ------------------- 2025-06-23T10:52:56 SCET offset = 176 PROBLEM => Stop after Start delay = 154 : should be in [95, 105] -------------------------------------------------------------------------------- 2025-06-23T10:59:40 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-06-23T10:54:45 SCET offset = 285 -------------------------------------------------------------------------------- 2025-06-23T10:59:56 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-06-23T11:00:00 MAINT_start_type:SA_CHARAC -------------------------------------------------------------------------------- 2025-06-23T12:00:00 MAINT_end_type:SA_CHARAC -------------------------------------------------------------------------------- 2025-06-23T12:00:06 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-06-23T12:00:24 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 29 => OK (no check) -------------------------------------------------------------------------------- 2025-06-23T12:01:04 AIAF061A Start_PAS_science ------------------- 2025-06-23T11:56:09 SCET offset = 69 => OK -------------------------------------------------------------------------------- 2025-06-23T12:01:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 16 => OK (no check) -------------------------------------------------------------------------------- 2025-06-23T16:07:33 AIAF063A Halt_science_on_PAS ------------------- 2025-06-23T16:02:38 SCET offset = 158 PROBLEM => Stop after Start delay = 89 : should be in [95, 105] -------------------------------------------------------------------------------- 2025-06-23T16:07:41 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-06-23T16:02:46 SCET offset = 166 -------------------------------------------------------------------------------- 2025-06-23T16:07:57 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-06-23T16:08:01 SA_ROT_start -------------------------------------------------------------------------------- 2025-06-23T16:28:01 SA_ROT_end -------------------------------------------------------------------------------- 2025-06-23T16:28:07 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-06-23T16:28:25 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 10 => OK (no check) -------------------------------------------------------------------------------- 2025-06-23T16:29:05 AIAF061A Start_PAS_science ------------------- 2025-06-23T16:24:10 SCET offset = 250 PROBLEM => Start science offset 250 not in [20,90] or [120,190] -------------------------------------------------------------------------------- 2025-06-23T16:30:11 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 16 => OK (no check) -------------------------------------------------------------------------------- 2025-06-23T19:15:54 ROLL_start_start_angle_deg:57 -------------------------------------------------------------------------------- 2025-06-23T20:05:54 ROLL_end_end_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-23T23:20:21 ROLL_start_start_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-24T00:10:21 ROLL_end_end_angle_deg:57 -------------------------------------------------------------------------------- 2025-06-24T00:49:31 AIAF063A Halt_science_on_PAS ------------------- 2025-06-24T00:44:36 SCET offset = 276 PROBLEM => Stop after Start delay = 26 : should be in [95, 105] -------------------------------------------------------------------------------- 2025-06-24T00:51:28 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-06-24T00:46:33 SCET offset = 93 -------------------------------------------------------------------------------- 2025-06-24T00:51:44 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-06-24T00:51:48 SA_ROT_start -------------------------------------------------------------------------------- 2025-06-24T01:11:48 SA_ROT_end -------------------------------------------------------------------------------- 2025-06-24T01:11:54 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-06-24T01:12:12 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 37 => OK (no check) -------------------------------------------------------------------------------- 2025-06-24T01:12:52 AIAF061A Start_PAS_science ------------------- 2025-06-24T01:07:57 SCET offset = 177 => OK -------------------------------------------------------------------------------- 2025-06-24T01:13:31 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 16 => OK (no check) -------------------------------------------------------------------------------- 2025-06-24T06:57:51 AIAF063A Halt_science_on_PAS ------------------- 2025-06-24T06:52:56 SCET offset = 176 PROBLEM => Stop after Start delay = 299 : should be in [95, 105] -------------------------------------------------------------------------------- 2025-06-24T06:59:40 AIAF133A Abort_the_PAS_sequencer ------------------- 2025-06-24T06:54:45 SCET offset = 285 -------------------------------------------------------------------------------- 2025-06-24T06:59:56 AIAF113A Disable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-06-24T07:00:00 MAINT_start_type:SA_CHARAC -------------------------------------------------------------------------------- 2025-06-24T08:00:00 MAINT_end_type:SA_CHARAC -------------------------------------------------------------------------------- 2025-06-24T08:00:06 AIAF112A Enable_SAF_response_for_EAS_and_PAS (SASTEERING_MI) -------------------------------------------------------------------------------- 2025-06-24T08:00:24 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 29 => OK (no check) -------------------------------------------------------------------------------- 2025-06-24T08:01:04 AIAF061A Start_PAS_science ------------------- 2025-06-24T07:56:09 SCET offset = 69 => OK -------------------------------------------------------------------------------- 2025-06-24T08:01:51 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 16 => OK (no check) -------------------------------------------------------------------------------- 2025-06-24T08:13:52 ROLL_start_start_angle_deg:57 -------------------------------------------------------------------------------- 2025-06-24T09:03:52 ROLL_end_end_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-24T12:00:50 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 55 => OK (no check) -------------------------------------------------------------------------------- 2025-06-24T12:02:10 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-06-24T12:11:11 offset_end = 76 Estimated Calibration duration = 0:09:01.600000 offset = 76 => OK -------------------------------------------------------------------------------- 2025-06-24T12:12:20 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 45 => OK (no check) -------------------------------------------------------------------------------- 2025-06-25T05:54:07 ROLL_start_start_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-25T06:44:07 ROLL_end_end_angle_deg:55 -------------------------------------------------------------------------------- 2025-06-25T12:00:50 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 55 => OK (no check) -------------------------------------------------------------------------------- 2025-06-25T12:02:10 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-06-25T12:11:11 offset_end = 76 Estimated Calibration duration = 0:09:01.600000 offset = 76 => OK -------------------------------------------------------------------------------- 2025-06-25T12:12:20 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 45 => OK (no check) -------------------------------------------------------------------------------- 2025-06-25T16:15:53 ROLL_start_start_angle_deg:55 -------------------------------------------------------------------------------- 2025-06-25T17:05:53 ROLL_end_end_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-26T00:48:07 ROLL_start_start_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-26T01:38:07 ROLL_end_end_angle_deg:54 -------------------------------------------------------------------------------- 2025-06-26T12:00:50 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 55 => OK (no check) -------------------------------------------------------------------------------- 2025-06-26T12:02:10 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-06-26T12:11:11 offset_end = 76 Estimated Calibration duration = 0:09:01.600000 offset = 76 => OK -------------------------------------------------------------------------------- 2025-06-26T12:12:20 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 45 => OK (no check) -------------------------------------------------------------------------------- 2025-06-26T16:15:53 ROLL_start_start_angle_deg:54 -------------------------------------------------------------------------------- 2025-06-26T17:05:53 ROLL_end_end_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-27T08:53:15 ROLL_start_start_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-27T09:43:15 ROLL_end_end_angle_deg:53 -------------------------------------------------------------------------------- 2025-06-27T12:00:50 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 55 => OK (no check) -------------------------------------------------------------------------------- 2025-06-27T12:02:10 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-06-27T12:11:11 offset_end = 76 Estimated Calibration duration = 0:09:01.600000 offset = 76 => OK -------------------------------------------------------------------------------- 2025-06-27T12:12:20 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 45 => OK (no check) -------------------------------------------------------------------------------- 2025-06-27T19:15:01 ROLL_start_start_angle_deg:53 -------------------------------------------------------------------------------- 2025-06-27T20:05:01 ROLL_end_end_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-28T05:54:07 ROLL_start_start_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-28T06:44:07 ROLL_end_end_angle_deg:52 -------------------------------------------------------------------------------- 2025-06-28T12:00:50 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 55 => OK (no check) -------------------------------------------------------------------------------- 2025-06-28T12:02:10 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-06-28T12:11:11 offset_end = 76 Estimated Calibration duration = 0:09:01.600000 offset = 76 => OK -------------------------------------------------------------------------------- 2025-06-28T12:12:20 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 45 => OK (no check) -------------------------------------------------------------------------------- 2025-06-28T16:15:53 ROLL_start_start_angle_deg:52 -------------------------------------------------------------------------------- 2025-06-28T17:05:53 ROLL_end_end_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-29T05:54:08 ROLL_start_start_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-29T06:44:08 ROLL_end_end_angle_deg:51 -------------------------------------------------------------------------------- 2025-06-29T12:00:50 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x01) offset_100 = 55 => OK (no check) -------------------------------------------------------------------------------- 2025-06-29T12:02:10 AIAF067A Start_PAS_Calibration (0x03D6, 0x075B, 0x0613) Need to wait 00:09:01 until 2025-06-29T12:11:11 offset_end = 76 Estimated Calibration duration = 0:09:01.600000 offset = 76 => OK -------------------------------------------------------------------------------- 2025-06-29T12:12:20 AIAF068A Configure_PAS_NM (0x00, 0x14, 0x40, 0x01, 0x07, 0x01, 0x5D) offset_100 = 45 => OK (no check) -------------------------------------------------------------------------------- 2025-06-29T20:16:52 ROLL_start_start_angle_deg:51 -------------------------------------------------------------------------------- 2025-06-29T21:06:52 ROLL_end_end_angle_deg:0 -------------------------------------------------------------------------------- 2025-06-29T23:52:50 AIAF063A Halt_science_on_PAS ------------------- 2025-06-29T23:47:55 SCET offset = 175 PROBLEM => Stop PAS science offset = 175.0 : should be in [135, 145] -------------------------------------------------------------------------------- 2025-06-29T23:54:20 AIAF065A Safe_PAS_HVs (0x0613) -------------------------------------------------------------------------------- 2025-06-29T23:59:38 AIAF113A Disable_TTF_response_for_EAS_and_PAS -------------------------------------------------------------------------------- 2025-06-30T00:05:00 WOL_start -------------------------------------------------------------------------------- 2025-06-30T03:05:00 WOL_start