void dskmi2_c ( SpiceInt nv,
ConstSpiceDouble vrtces[][3],
SpiceInt np,
ConstSpiceInt plates[][3],
SpiceDouble finscl,
SpiceInt corscl,
SpiceInt worksz,
SpiceInt voxpsz,
SpiceInt voxlsz,
SpiceBoolean makvtl,
SpiceInt spxisz,
SpiceInt work [][2],
SpiceDouble spaixd [],
SpiceInt spaixi [] )
Make spatial index for a DSK type 2 segment. The index is returned
as a pair of arrays, one of type SpiceInt and one of type
SpiceDouble. These arrays are suitable for use with the DSK type 2
writer dskw02_c.
DAS
DSK
DAS
DSK
FILES
PLATE
TOPOGRAPHY
Variable I/O Description
-------- --- --------------------------------------------------
SPICE_DSK02_IXDFIX
P Size of fixed-size portion of d.p. index component.
SPICE_DSK02_IXIFIX
P Size of fixed-size portion of integer index
component.
nv I Number of vertices.
vrtces I Vertices.
np I Number of plates.
plates I Plates.
finscl I Fine voxel scale.
corscl I Coarse voxel scale.
worksz I Workspace size.
voxpsz I Voxel-plate pointer array size.
voxlsz I Voxel-plate list array size.
makvtl I Vertex-plate list flag.
spxisz I Spatial index integer component size.
work I Workspace.
spaixd I Double precision component of spatial index.
spaixi I Integer component of spatial index.
nv is the number of vertices belonging to the input
set of plates.
vrtces is an array of coordinates of the vertices. Vertex
indices, also called "vertex numbers," are 1-based in
all languages supported by SPICE, and range from 1 to
`nv'. The ith vertex occupies elements [i-1][0:2] of
this array.
np is the number of plates in the input plate set.
plates is an array representing the triangular plates of a
shape model. The elements of `plates' are vertex
indices; vertex indices, as well as plate indices, are
1-based in all languages supported by SPICE. The vertex
indices of the ith plate occupy elements [i-1][0:2] of
this array.
finscl is the fine voxel scale. This scale determines the
edge length of the cubical voxels comprising the fine
voxel grid: the edge length `voxsiz' is approximately
finscl * {average plate extent}
where the extents of a plate are the respective
differences between the maximum and minimum
coordinate values of the plate's vertices.
The relationship between `voxsiz' and the average plate
extent is approximate because the `voxsiz' is adjusted
so that each dimension of the fine voxel grid is an
integer multiple of the coarse voxel scale.
See the Particulars section below for further
information on voxel scales.
corscl is the coarse voxel scale. This integer scale is the
ratio of the edge length of coarse voxels to that of
fine voxels. The coarse scale must be large enough so
that the total number of coarse voxels does not exceed
SPICE_DSK02_MAXCGR (see the Parameters section below).
worksz is the second dimension of the workspace array `work'.
`worksz' must be at least as large as the greater of
- the number of fine voxel-plate associations
This number is equal to
np * {average number of fine voxels
intersected by each plate}
- the number of vertex-plate associations, if
the vertex-plate mapping is constructed.
This number is equal to
nv + ( 3 * np )
voxpsz is the size of the fine voxel-plate pointer array.
This array maps fine voxels to lists of plates that
intersect those voxels. `voxpsz' must be at least as
large as
3
corscl * {number of non-empty coarse voxels}
voxlsz is the size of the fine voxel-plate list array. This
array contains, for each non-empty fine voxel, the
count of plates that intersect that voxel and the
IDs of those plates. `voxlsz' must be at least as large
as
`np' * {average number of fine voxels
intersected by each plate}
+ {number of non-empty fine voxels}
makvtl is a logical flag that, when set to SPICETRUE, indicates
that a vertex-plate association list is to be
constructed.
The amount of workspace that is needed may depend on
whether a vertex-plate association list is
constructed. When this list is constructed, the size
of the integer component of the spatial index is
increased by the size of the list and the size of a
vertex-plate pointer array; the total of these sizes
is
( 2 * nv ) + ( 3 * np )
spxisz is the declared size of the output array SPAIXI. This
size must be at least as large as the sum of
- the fixed-size part of the integer component of
the index, which includes the coarse voxel grid;
this value is
SPICE_DSK02_IDXFIX
- the size `voxpsz' of the voxel-plate pointer array
- the size `voxlsz' of the voxel-plate association
list
plus, if the vertex-plate association list is
constructed,
- the size `nv' of the vertex-plate pointer array
- the size of the vertex-plate association list;
this size is
nv + ( 3 * np )
work is the workspace array. The array should be declared
with dimensions
(2, worksz)
See the description of `worksz' above.
work is the workspace array, modified by the operations
performed by this routine.
spaixd,
spaixi are, respectively, the double precision and integer
components of the spatial index of the segment.
`spaixd' must be declared with size at least
SPICE_DSK02_IXDFIX.
`spaixi' must be declared with size at least `spxisz'.
SPICE_DSK02_IXDFIX
is the size of the double precision component
of the spatial index.
SPICE_DSK02_IXIFIX
is the size of the fixed-size portion of the integer
component of the spatial index.
See the header file SpiceDSK.h for declarations of the public DSK
type 2 parameters used by this routine.
1) If the fine voxel scale is non-positive, the error
SPICE(BADFINEVOXELSCALE) is signaled.
2) If the coarse voxel scale is less than 1, the error
SPICE(BADCOARSEVOXSCALE) is signaled.
3) If `nv' is less than 3 or greater than MAXVRT, the error
SPICE(BADVERTEXCOUNT) is signaled.
4) If `np' is less than 1 or greater than MAXPLT, the error
SPICE(BADPLATECOUNT) is signaled.
5) If the workspace size `worksz' is less than np+1, the error
SPICE(WORKSPACETOOSMALL) is signaled. This is merely a
sanity check; normally the workspace will need to be
substantially larger than this reference value. See the
description of `worksz' in the header section Detailed_Input
above.
6) If the voxel-plate pointer array size `voxpsz' is less than 1,
the error SPICE(PTRARRAYTOOSMALL) is signaled. This is merely
a sanity check; normally this pointer array will need to be
substantially larger than this reference value. See the
description of `voxpsz' in the header section Detailed_Input
above.
7) If the voxel-plate list array size `voxlsz' is less than np+1,
the error SPICE(PLATELISTTOOSMALL) is signaled. This is
merely a sanity check; normally this array will need to be
substantially larger than this reference value. See the
description of `voxlsz' in the header section Detailed_Input
above.
8) If the size `spxisz' of the integer array SPAIXI is too small
to contain its constituent structures, where the sizes
of these structures are derived from the inputs
`nv', `np', `voxpsz', `voxlsz'
the error SPICE(INTINDEXTOOSMALL) will be signaled.
9) If there is insufficient room to create any of the data
structures contained in the spatial index, the error
will be diagnosed and signaled by a routine in the call
tree of this routine.
None.
Users planning to create DSK files should consider whether the
SPICE DSK creation utility MKDSK may be suitable for their needs.
This routine supports use of the DSK type 2 segment writer dskw02_c
by creating the "spatial index" arrays required as inputs to that
routine.
A spatial index is a group of data structures that facilitates
rapid high-level computations involving sets of plates. The data
structures created by this routine are aggregated into arrays
of type SpiceInt and type SpiceDouble.
Voxel grids
===========
A key geometric computation---probably the most important, as it
serves as a foundation for other high-level computations---is
finding the intersection of a ray with the plate set. DSK type 2
segments use data structures called "voxel grids" as part of
their indexing mechanism. There is a "coarse grid": a box that
completely encloses a DSK type 2 segment's plate set, and which
is composed of identically-sized cubes called "coarse voxels."
Each coarse voxel in composed of smaller cubes called "fine
voxels." When the term "voxel" is used without qualification, it
refers to fine voxels.
Type 2 DSK segments contain data structures that associate plates
with the fine voxels intersected by those plates. These
structures enable the type 2 DSK software to rapidly find plates
in a given region of space.
Voxel scales
============
There are two voxel scales:
- The coarse voxel scale is the integer ratio of the
edge length of a coarse voxel to the edge length of
a fine voxel
- The fine voxel scale is the double precision ratio
of the edge length of a fine voxel to the average
extent of the plates in the input plate set. "Extents"
of a plate are the absolute values of the differences
between the respective maximum and minimum X, Y, and Z
coordinates of the plate's vertices.
Voxel scales determine the resolution of the voxel grid.
Voxel scales must be chosen to satisfy size constraints and
provide reasonable plate lookup performance.
The following considerations apply to spatial indexes of
type 2 DSK segments:
1) The maximum number of coarse voxels is fixed at
SPICE_DSK02_MAXCGR (declared in SpiceDSK.h).
2) If there are too few fine voxels, the average number of
plates per fine voxel will be very large. This largely
negates the performance improvement afforded by having an
index. Also, the number of plates per voxel may exceed
limits imposed by DSK subroutines that use static arrays.
3) If there are too many fine voxels, the average number of
voxels intersected by a given plate may be too large for
all the plate-voxel associations to be stored. In
addition, the time needed to examine the plate lists for
each voxel (including the empty ones) may become quite
large, again negating the value of the index.
In many cases, voxel scales yielding optimum performance must be
determined by experiment. However, the following heuristics can
provide reasonable starting values:
Let `np' be the number of plates. Let `fs' be the fine voxel
scale. Then a reasonable value of `fs' may be
(0.25)
fs = np / 8.
In general, `fs' should not smaller than 1.
The numerical results shown for this example may differ across
platforms. The results depend on the SPICE kernels used as
input, the compiler and supporting libraries, and the machine
specific arithmetic implementation.
1) Create a three-segment DSK file using plate model data for
Phobos. Use latitudinal, rectangular, and planetodetic
coordinates in the respective segments. This is not a
realistic example, but it serves to demonstrate use of
the supported coordinate systems.
For simplicity, use an existing DSK file to provide the
input plate and vertex data. The selected input file has one
segment.
/.
Example program for dskw02_c, dskmi2_c, and dskrb2_c
Create a three-segment DSK file using plate model data for
Phobos. Use latitudinal, rectangular, and planetodetic
coordinates in the respective segments.
For simplicity, use an existing DSK file to provide the
input plate and vertex data. The selected input file has one
segment.
Version 1.0.0 22-JAN-2016 (NJB)
./
#include <stdio.h>
#include "SpiceUsr.h"
int main()
{
/.
Local constants
./
#define FILSIZ 256
#define LNSIZE 81
#define NCOR 4
#define NSEG 3
#define NAMLEN 21
/.
Local variables
./
/.
Below, we declare large arrays static to avoid stack
overflow problems.
./
SpiceBoolean found;
SpiceChar cornam [ NCOR ][ NAMLEN ] =
{ "radius",
"Z-coordinate",
"Z-coordinate",
"altitude" };
SpiceChar * dsk;
SpiceChar * frame;
SpiceChar * indsk;
SpiceDLADescr dladsc;
SpiceDouble corpar [ SPICE_DSK_NSYPAR ];
SpiceDouble f;
SpiceDouble finscl;
SpiceDouble first;
SpiceDouble last;
SpiceDouble mncor1;
SpiceDouble mncor2;
SpiceDouble mncor3;
SpiceDouble mxcor1;
SpiceDouble mxcor2;
SpiceDouble mxcor3;
SpiceDouble re;
SpiceDouble rp;
/.
Note: the values of SPICE_DSK02_MAXVRT and
SPICE_DSK02_MAXPLT declared in SpiceDSK.h,
integer spatial index dimension SPICE_DSK02_SPAISZ,
and the workspace dimension SPICE_DSK02_MAXCEL
are very large. Smaller buffers can be used for most
applications.
./
static SpiceDouble spaixd [ SPICE_DSK02_SPADSZ ];
static SpiceDouble vrtces [ SPICE_DSK02_MAXVRT ][3];
SpiceInt center;
SpiceInt corscl;
SpiceInt corsys;
SpiceInt dclass;
SpiceInt handle;
SpiceInt i;
SpiceInt inhan;
SpiceInt np;
SpiceInt nv;
static SpiceInt plates [ SPICE_DSK02_MAXPLT ][3];
SpiceInt segno;
static SpiceInt spaixi [ SPICE_DSK02_SPAISZ ];
SpiceInt spaisz;
SpiceInt surfid;
SpiceInt voxpsz;
SpiceInt voxlsz;
static SpiceInt work [ SPICE_DSK02_MAXCEL ][2];
SpiceInt worksz;
/.
Assign names of input and output DSK files.
./
indsk = "phobos_3_3.bds";
dsk = "phobos_3_3_3seg.bds";
/.
Open input DSK for read access; find first segment.
./
dasopr_c ( indsk, &inhan );
dlabfs_c ( inhan, &dladsc, &found );
/.
Fetch vertices and plates from input DSK file.
Note that vertex and plate indices are 1-based.
./
printf ( "Reading input data...\n" );
dskv02_c ( inhan, &dladsc, 1, SPICE_DSK02_MAXVRT,
&nv, vrtces );
dskp02_c ( inhan, &dladsc, 1, SPICE_DSK02_MAXPLT,
&np, plates );
printf ( "Done.\n" );
/.
Set input array sizes required by dskmi2_c.
./
voxpsz = SPICE_DSK02_MAXVXP;
voxlsz = SPICE_DSK02_MXNVLS;
worksz = SPICE_DSK02_MAXCEL;
spaisz = SPICE_DSK02_SPAISZ;
/.
Set fine and coarse voxel scales. (These usually
need to determined by experimentation.)
./
finscl = 5.0;
corscl = 4;
/.
Open a new DSK file.
./
dskopn_c ( dsk, dsk, 0, &handle );
/.
Create three segments and add them to the file.
./
for ( segno = 1; segno <= NSEG; segno++ )
{
/.
Create spatial index. We won't generate a
vertex-plate mapping, so we set the flag
for creating this map to "false."
./
printf ( "Creating segment %d\n", (int)segno );
printf ( "Creating spatial index...\n" );
dskmi2_c ( nv, vrtces, np, plates,
finscl, corscl, worksz, voxpsz,
voxlsz, SPICEFALSE, spaisz, work,
spaixd, spaixi );
printf ( "Done.\n" );
/.
Set up inputs describing segment attributes:
- Central body: Phobos
- Surface ID code: user's choice.
We use the segment number here.
- Data class: general (arbitrary) shape
- Body-fixed reference frame
- Time coverage bounds (TBD)
./
center = 401;
surfid = segno;
dclass = SPICE_DSK_GENCLS;
frame = "IAU_PHOBOS";
first = -50 * jyear_c();
last = 50 * jyear_c();
/.
Set the coordinate system and coordinate system
bounds based on the segment index.
Zero out the coordinate parameters to start.
./
for ( i = 0; i < SPICE_DSK_NSYPAR; i++ )
{
corpar[i] = 0.0;
}
if ( segno == 1 )
{
/.
Use planetocentric latitudinal coordinates. Set
the longitude and latitude bounds.
./
corsys = SPICE_DSK_LATSYS;
mncor1 = -pi_c();
mxcor1 = pi_c();
mncor2 = -pi_c()/2;
mxcor2 = pi_c()/2;
}
else if ( segno == 2 )
{
/.
Use rectangular coordinates. Set the
X and Y bounds.
The bounds shown here were derived from
the plate data. They lie slightly outside
of the range spanned by the plates.
./
corsys = SPICE_DSK_RECSYS;
mncor1 = -1.3;
mxcor1 = 1.31;
mncor2 = -1.21;
mxcor2 = 1.2;
}
else
{
/.
Set the coordinate system to planetodetic.
./
corsys = SPICE_DSK_PDTSYS;
mncor1 = -pi_c();
mxcor1 = pi_c();
mncor2 = -pi_c()/2;
mxcor2 = pi_c()/2;
/.
We'll use equatorial and polar radii from
pck00010.tpc. These normally would be fetched
at run time, but for simplicity, we'll use
hard-coded values.
./
re = 13.0;
rp = 9.1;
f = ( re - rp ) / re;
corpar[0] = re;
corpar[1] = f;
}
/.
Compute plate model radius bounds.
./
printf ( "Computing %s bounds of plate set...\n",
cornam[corsys-1] );
dskrb2_c ( nv, vrtces, np, plates,
corsys, corpar, &mncor3, &mxcor3 );
printf ( "Done.\n" );
/.
Write the segment to the file.
./
printf ( "Writing segment...\n" );
dskw02_c ( handle,
center, surfid, dclass, frame, corsys,
corpar, mncor1, mxcor1, mncor2, mxcor2,
mncor3, mxcor3, first, last, nv,
vrtces, np, plates, spaixd, spaixi );
printf ( "Done.\n" );
}
/.
Segregate the data records in the DSK file and
close the file.
./
printf ( "Segregating and closing DSK file...\n" );
dskcls_c ( handle, SPICETRUE );
printf ( "Done.\n" );
return ( 0 );
}
None.
None.
N.J. Bachman (JPL)
-CSPICE Version 1.0.0, 13-DEC-2016 (NJB)
make spatial index for type 2 dsk segment
Link to routine dskmi2_c source file dskmi2_c.c
|